Broken AVRISP Make sure that nothing is driving your SPI lines. You maybe able to just hold your micro in reset or disconnect the AVRISP from your target hardware and suplly it with a seperate...
Wednesday, 19 May 2004 - 23:45
RFID race timing Hi
Timing is just one of the reasons why RFID is the wrong technology to use for this application. There is no way to determine exactly where a RFID tag will be read. Some tags...
Sunday, 8 February 2004 - 21:29
Best Bus For Home Automation?? Hi John
I used Lonworks (from Echelon) for a couple of years about 5 years ago. Unless things have changed, the protocol isn't public domain so you can't port it to the AVR....
Wednesday, 4 February 2004 - 03:44
Watchdog reset Read the MCU Control and Status Register, MCUCSR
Tuesday, 3 February 2004 - 23:32
Very Weird Andreas,
I'll have a look at the crystal. We have actually been having problems with this crystal at high (not that high) temperatures. Output fluctuations in frequency and...
Thursday, 15 January 2004 - 21:20
Very Weird Hi Andreas,
Vcc rise time is ~6ms.
BOD = 2.7V
BOD Enabled
CKSEL = External Clock 6CK + 64ms
>>DFAO
Dave.
Thursday, 15 January 2004 - 02:45
Very Weird The problem doesnt occur when I keep the board powered and cause a reset by momentarily shorting the reset pin to ground. It only occurs when i remove the power then re-apply...
Wednesday, 14 January 2004 - 22:48
Problem with AVR ISP Thanks for the replys,
I've re-loaded the firmware and it programs at the correct speed again :)
BTW I never (intentionally) hot plug...
Dave.
Tuesday, 13 January 2004 - 21:02
Problem with AVR ISP Thanks for the replys,
I've re-loaded the firmware and it programs at the correct speed again :)
BTW I never (intentionally) hot plug...
Dave.
JVM for AVR Seem ANONYMOUS is stupid deadborn thing if wanting to use java with uC.
Tuesday, 6 January 2004 - 01:33
JVM for AVR Hi Jani
IBM/OTI has an embedded J2ME jvm called j9. Unfortunately for you, this runs on an OS such as embedded linux or Wince. So you'd be looking at a 32-bit processor of some...
Make sure that nothing is driving your SPI lines. You maybe able to just hold your micro in reset or disconnect the AVRISP from your target hardware and suplly it with a seperate...
Hi Timing is just one of the reasons why RFID is the wrong technology to use for this application. There is no way to determine exactly where a RFID tag will be read. Some tags...
Hi John I used Lonworks (from Echelon) for a couple of years about 5 years ago. Unless things have changed, the protocol isn't public domain so you can't port it to the AVR....
Read the MCU Control and Status Register, MCUCSR
Andreas, I'll have a look at the crystal. We have actually been having problems with this crystal at high (not that high) temperatures. Output fluctuations in frequency and...
Hi Andreas, Vcc rise time is ~6ms. BOD = 2.7V BOD Enabled CKSEL = External Clock 6CK + 64ms >>DFAO Dave.
The problem doesnt occur when I keep the board powered and cause a reset by momentarily shorting the reset pin to ground. It only occurs when i remove the power then re-apply...
Thanks for the replys, I've re-loaded the firmware and it programs at the correct speed again :) BTW I never (intentionally) hot plug... Dave.
Thanks for the replys, I've re-loaded the firmware and it programs at the correct speed again :) BTW I never (intentionally) hot plug... Dave.
noname = daveavr
Seem ANONYMOUS is stupid deadborn thing if wanting to use java with uC.
Hi Jani IBM/OTI has an embedded J2ME jvm called j9. Unfortunately for you, this runs on an OS such as embedded linux or Wince. So you'd be looking at a 32-bit processor of some...
Pages