Post Created date
Serial Port Logging Software for PC
Quote:Try tera term. What is the website for the official TeraTerm? I see many hits in Google
Tuesday, 11 November 2008 - 13:19
Using JTAG ICE mkII on custom hardware
According to the STK500 manual: Quote: The connection between the JTAGICE mkII probe and the 6-pin ISP header on the target is described in the table below. JTAGICE mkII probe...
Monday, 10 November 2008 - 02:09
Using JTAG ICE mkII on custom hardware
Are you saying that you want to make a connector that connects the ICE_mkII JTAG connector to a 10 pin ISP connector so you can do ISP programming with the ICE_mkII?
Monday, 10 November 2008 - 01:33
Interrupt on Pin Change
Quote: It may be that your method will produce entirely satisfactory results; much depends on your requirements and the nature of the signal involved. I think the On Pin Change...
Sunday, 9 November 2008 - 17:15
Interrupt on Pin Change
Quote: And remember that you WILL GET 2 interrupts, one going up and one going down, therefore a Pin CHANGE interrupt. This is what I want. I am measuring an incoming PWM data...
Sunday, 9 November 2008 - 12:49
Interrupt on Pin Change
PCMSK0 |= (1 << PCINT0); PCICR |= (1 << PCIE0); Yup. That was it. I don't know why I did that. :oops: Thanks so much!
Sunday, 9 November 2008 - 03:20
[TUT] [C] Newbie's Guide to AVR Timers
Thanks for this tutorial. It is great!! It taught me so much!
Thursday, 6 November 2008 - 03:56
Newbie Questions
clawson wrote:Just to be clear that F_CPU does not "set" a frequency as such - it's merely letting the code know what the internal/oscillator is doing so that the code can...
Tuesday, 4 November 2008 - 23:23
Newbie Questions
Ah, this is much different than with the Microchip parts. For the Oscillator I see in AVR Studio where you set the fuses that will be flahed into the device. I see there is a...
Tuesday, 4 November 2008 - 19:39
Newbie Questions
Thanks Cliff. This was very helpful. Another newbie question... Where do you setup things like oscilator type, oscilator frequency, watchdog timer on/off, etc. Do you set these...
Tuesday, 4 November 2008 - 17:50

Pages