Type in the full discussion title or a part of it.
Discussion Title Created date
ATMega168 Driver Critique
I was bored tonight so I decided to try my hand at making an ADC driver for the mega168. I've never written a driver before really so I thought I'd post what I have and see if...
Monday, 29 November 2010 - 05:45
Port LUFA Xplain bridge from usb1287 to usb162
Hi all, In LUFA, Dean made a great firmware for the Xplain board. It acts doubly as a PDI programmer and a UART bridge by means of the usb1287 chip. Since the PDI programming uses...
Tuesday, 23 November 2010 - 20:30
Over voltage protection
Freaks, I've tried searching for a solution to this but I can not find anything :? I'm building an xmega dev board that has 3.3V and 5.0V supplies and both will be attached to...
Tuesday, 23 November 2010 - 14:31
AT90USB162 - Windows wont detect LUFA or DFU
Freaks, I built a small breakout board for the AT90USB162 in the 32 pin QFN package. I've built it three times on three different boards with new components and I get the same...
Thursday, 18 November 2010 - 02:55
XMega Development Board
Hey everyone, so a while back I make a post about making a XMega development board with a lot of stuff on it, and not just a micro, crystal, 2 leds, and then jumpers. I wanted it...
Tuesday, 26 October 2010 - 05:02
XBee - UART bridge for ATMega168
Hi all, I am the happy new owner of two new XBee modules that I have heard so many good things about however I spent about 7 hours in lab today trying to get the dumb things to...
Wednesday, 6 October 2010 - 04:18
Advanced XMEGA Development Board
Hello all! I've read a few older topics regarding xmega dev boards and it seems as though the general consensus was that no one is really interested in a $100 board but here's the...
Wednesday, 26 May 2010 - 00:24

Pages