Type in the full discussion title or a part of it.
Discussion Title Created date
LDO precision--L78L33 voltage regulator to 3.3V
Hi, I am using the L78L33 (http://www.st.com/stonline/books... ) to produce a 3.3V output, wired up as shown in the attached image. My Vin = 5V basically from my computer's USB...
Monday, 15 November 2010 - 04:48
Bootloader and MCU clock speed
Hi, I have been looking and search bootloaders for AVR out there. And there are a number of them, e.g., https://www.avrfreaks.net/index.p... . I have also scanned through the...
Sunday, 7 November 2010 - 15:35
Possible to do I2C on the AT90USB162 micro-controller?
Hi, I don't see it has the SDA/SCL pins.
Thursday, 28 October 2010 - 23:49
Clarification on decoupling caps layout
Hi, I am doing a breakout board for an IC. I have one 0.1uF cap for each pair of VSS and VCC. However, I do have one question the way how the decoupling cap is laid out with the...
Thursday, 28 October 2010 - 06:29
Looking for fast (assembly ok) primitive graphic routines
Hi, I've made an LCD driver work with an LCD I have. I would like to know if there are free/open source AVR, ATMEGA8/168/328, fast (assembly is fine) graphics routines, e.g.,...
Monday, 18 October 2010 - 03:18
Decent delay with nanosecond granularity
Hi, The include file support _delay_ms() and _delay_us() calls but not _delay_ns() call, that is, delay a number of nanoseconds. How would I implement a delay_ns() using F_CPU,...
Sunday, 10 October 2010 - 00:14
What's so good about AT32UC3A's EBI (External Bus Interface)
Hi, Trying to decide to use AT32UC3A0512 (144-pin), which supports EBI, or AT32UC3A1512 (100-pin), which does not. Besides using EBI for SDRAM interface, anything else that EBI...
Monday, 27 September 2010 - 21:09
Basic question the LM317 adjustable voltage regulator
ok, I skimmed over the spec and see lots of LM317 calculators (like http://www.whatcircuits.com/lm31... ) on the net that have one resistor held constant (R2) and varies the Vout...
Friday, 24 September 2010 - 01:52
Does AVRDude support 32-bit AVR UC3 micro-controllers?
Hi, I have built the USBASP programmer. And it has been working well. With 32-bit AVR UC3 micro-controllers, I take the programmer should work for these 32-bit microcontroller...
Tuesday, 21 September 2010 - 07:33
Voltage regulating approach for the Nokia 1100 LCD screen
Hi, I managed to get a hold of an old Nokia 1100 cell phone with the LCD. Below are the pinouts of the LCD. (See also http://www.sunbizhosting.com/~sp... ) The 1110 service...
Tuesday, 21 September 2010 - 04:43
Basic questions about interfacing with graphics LCDs
Hi, I have been trying to interface with graphics LCDs that have V0 and VEE pins besides the VCC and GND pins. I have browsed many datasheets of such LCDs. V0 is for "bias supply...
Friday, 17 September 2010 - 02:25
Painful in making the Hantronix 240x64 GLCD to work
Hi, I have a Hantronix 240x64 graphics LCD. It's controlled by the T6963C controller. From http://www.hantronix.com/2_2.html, I believe my LCD is the one with "240x64 EL,(W)LED...
Monday, 13 September 2010 - 04:35