Type in the full discussion title or a part of it.
Discussion Title Created date
Can write fuses but CAN'T read back with usbtiny for ATMEGA328
Hi,   It's one of those fuse days again.  As you can see below, I can write the fuses for my ATMEGA328 (just the original ATMEGA328 not ATMEGA328P) using USBTiny...
Tuesday, 25 August 2015 - 00:32
Replacing electrolytic caps for the power supply board of a 30-year-old computer
Hi,   Besides playing with AVR microcontrollers, I collect vintage computers.  I have acquired an Atari 1040STF, and I believe the caps on the power board need to be...
Sunday, 5 July 2015 - 17:12
Generating a clock frequency
Hi,   I follow the attached schematic to generate a 3.579545Mhz frequency, using the crystal 3.579545Mhz.  In the schematic, I choose C1 as 22pF.  The frequency...
Saturday, 17 January 2015 - 22:54
Analog GND and digital GND clarification needed
Hi,   Doing a project with SPI and MP3 player using the VS1003B MP3 decoder chip.  I've found a lot of projects on the net that I can try out.  One such project is...
Friday, 2 January 2015 - 19:51
SPI MOSI -> MOSI?
Hi,   Pardon for this rather basic question.  But I just wanted to be sure.  When I use AVRDude to program an ATMEGA via SPI using the USBAsp program, MOSI pin of...
Friday, 2 January 2015 - 08:35
Can tantalum capacitors be used instead of electrolytic ones?
Hi,   I am wondering if tantalum capacitors can be used instead electrolytic capacitors for the Vin and Vout of a power source?  My power source is basically the USB...
Monday, 29 December 2014 - 02:29
Clock duty cycle
Hi all,   I am looking to make something fun with the MC6847, an old video display processor from Motorola.  I browsed through its datasheet (http://people.ece.cornell....
Monday, 22 December 2014 - 19:38
WinAVR reports a problem from the Makefile that is generated by Atmel Studio 4.19
Hi,   I have the attached the generated makefile from Atmel Studio 4.19, but keep getting the below errors when I issue the make command from WinAVR, which I prefer to use....
Saturday, 20 December 2014 - 18:49
Pulsing common ANODE LEDs via PWM
Hi,   I've bought a bunch of RGB LEDs, and based on the attached diagram, it looks like the LEDs are common ANODE.  I am looking to use an ATMEGA328 just to try out if I...
Saturday, 29 November 2014 - 17:24
XTAL1 and XTAL2 questions
Hi, Up until now with AVR devices, if I want high F_CPU freq for my AVR device, I would attach a crystal to the XTAL1 and XTAL2 with a couple 22pF caps. I've seen CPUs/MPUs, like...
Friday, 5 September 2014 - 15:09
Having one heck of a problem with JTAGICE mkII + ATMEGA8
Hi, I am trying to use the JTAGICE mkii to program the ATMEGA8 via ISP. AS61 recognizes the JTAGICE mkii programmer, but it can't or I can't set the voltage, which is stubbornly...
Wednesday, 3 September 2014 - 18:39
Having one heck of a problem with JTAGICE mkII + ATMEGA8
Hi, I am trying to use the JTAGICE mkii to program the ATMEGA8 via ISP. AS61 recognizes the JTAGICE mkii programmer, but it can't or I can't set the voltage, which is stubbornly...
Wednesday, 3 September 2014 - 18:36

Pages