Post Created date
Split from: Chip Reset/Hang
Thanks, loads in good time now.
Sunday, 10 November 2019 - 01:50
Split from: Chip Reset/Hang
5,312px × 2,988px, Seriously?
Saturday, 9 November 2019 - 23:56
Split from: Chip Reset/Hang
+1
Saturday, 9 November 2019 - 17:44
DC Motor Speed Control
awneil wrote:Note that PWM just varies the power delivered to the motor - it does not control speed. Actually, PWM will vary the voltage applied to the motor.  The power...
Friday, 8 November 2019 - 11:32
Vcc vs Frequency Question - Let's beat this horse one more time
I realize the OP's question pertains to the Atmega32U4 but the new xTinys have info in the data sheet that imply the oscillator functions at full speed over the entire voltage...
Tuesday, 5 November 2019 - 23:50
Analog mux settling time on Attiny24/44/84
When using the ADC you must consider the input impedance on each channel relative to the S/H capacitance.  For the analog compare I'd guess you'd do the same thing but use...
Monday, 4 November 2019 - 23:16
Pinchange interupts
IPguru wrote:I am pretty sure this is a generic question that relates to all AVR's but just in case my trarget is a tiny 2313A This is one of the new xTiny mcus right?  If...
Tuesday, 29 October 2019 - 22:21
M328P vs Mega0/1 ADC inputs
Thanks for the detailed reply.  That explains why I never ran across any mention of this issue/phenomenon in the datasheets for the various devices I've used.  I've yet...
Tuesday, 22 October 2019 - 10:46
M328P vs Mega0/1 ADC inputs
ka7ehk wrote:The M328P has digital disconnects on ADC inputs since logic inputs can cause a lot of power (in relative terms, I guess) to be drawn from Vcc when inputs are held...
Monday, 21 October 2019 - 22:19
AVR generated 12v pulse, just for fun
MattRW wrote: AVR generated 12v pulse, just for fun Emphasis mine.  No need to critique the OP's technique, he made clear at the beginning why he was doing this.
Monday, 21 October 2019 - 10:41
1:10 Transformer; to match between amplifier and a piezo-disc
DocJC wrote:Others can correct this if I have it wrong. No need for correction, you have it right. A 45 ohm load connected through a 10:1 ratio transformer would present a 0.45...
Thursday, 17 October 2019 - 22:15
suppress surge at the source on 120 vac house circuit ?
I think this may be true ka7ehk wrote:Not sure, but I think that it is not allowed to have both phases in close proximity unless it serves a 240V load. but this is not true ka7ehk...
Tuesday, 8 October 2019 - 00:23

Pages