Post Created date
What do you think of the UC3-A3 Xplained board?
I can't comment on that particular board as I've never used it but I'd be willing to bet you won't be disappointed with the EBI interface. It is quite flexible and easy to use....
Monday, 7 January 2013 - 23:26
Pre-programmed Fuse-settings differ from batch to batch
obby wrote:However, they got shipped with different fuse-settings with regards to the bootloader protection area. One was programmed with 0KB and one with 8KB. Should I be...
Thursday, 27 December 2012 - 16:31
ADC interrupt - external
You might be able to configure the ADC to trigger from a timer/counter and then configure the timer/counter to count from an external input.
Sunday, 2 December 2012 - 12:26
ADC interrupt - external
In the datasheet, chapter "33 Analog to Digital Converter" reveals that the name for the external trigger input is "TRIGGER" (as you have already found). Chapter "12.7 Peripheral...
Saturday, 1 December 2012 - 19:06
Paralleling LM2576
Ali_dehbidi wrote:So why do you care about the picture size,is it working?Do you see problems? Because the image is so big I can only see a small portion of it at a time. It is...
Monday, 19 November 2012 - 11:48
Paralleling LM2576
3031 x 2131. Really? You might get more interest if the image was reduced to a sensible size.
Sunday, 18 November 2012 - 11:19
Endedness in micros?
westfw wrote:As far as I know, bitwise endianness is a separate issue from bytewise endianness, and is more up to compilers (or of defining bits in a bitfield) than any hardware...
Wednesday, 24 October 2012 - 22:38
PWM Troubleshooting
What's your PWM frequency? What's the value of your bootstrap capacitors? The TI datasheet recomends 0.1 uF for PWM frequencies of 10kHz and up; below 10kHz you may need a...
Wednesday, 24 October 2012 - 22:28
Endedness in micros?
AVR32 is big endien.
Tuesday, 23 October 2012 - 22:17
Timer interrupt Ack problem
I don't understand why it works at all without __attribute__((__interrupt__)).
Thursday, 11 October 2012 - 19:40
UC3A power manager
Dalibor2000 wrote:Do you happen to have the link to errata doc? All the errata is in the datasheet. It is listed in reverse order with the newest rev first. The only way I know...
Tuesday, 2 October 2012 - 10:54
UC3A power manager
How old is your EVK1100? A lot of these shipped with an ES (engineering sample) version of the chip which is hardware rev E. The errata for rev E devices says that max PBA freq...
Monday, 1 October 2012 - 22:03

Pages