Type in the full discussion title or a part of it.
Discussion Title Created date
SAMd21 how to modify register values??
I'm clickin' but it ain't happenin' With AVRs I can change (at least I could) the register values by clicking on the register and enter a new value for it, can't do it with the...
Sunday, 19 March 2017 - 23:03
Stepup/stepdown regulator module (now generator)
I'm in the middle of trying to fix up someone else problem.   I need a small regulator module with (was 1.5V) 3-5V minimum to 12V (or higher) input and a fixed 5V@ ~1A out...
Tuesday, 14 March 2017 - 08:08
Header files in AS7
This of course applies to the AVR related Studio.   I have just realised that, unlike AS4, there doesn't seem to be different section for header files and C files. Looking at...
Saturday, 11 March 2017 - 03:14
SAMD21 Xplained board inconsistencies
So all pins on the board are either marked as PAxx or PBxx, yet there is NO WAY that I know of addressing PORTA or PORTB direction or other registers by those names but rather as...
Sunday, 5 March 2017 - 00:38
Can't install CMSIS 4.2.0
Tried several times.   See also https://community.atmel.com/comm...  
Wednesday, 1 March 2017 - 06:00
Differences?? SAMD20 and SAMD21
Bored to death here! After cataract surgery and being stuck at home for a week I'm considering re activating my FB account or search out for a local drug dealer.......   But...
Wednesday, 1 March 2017 - 02:39
Tiny817 UPDI programming
So I was messing around adding a UPDI connector to the T817 board to test it with the JTAG Mk3 and the Atmel Ice.   I'm ASS_U_MEing that the UPDI link from the debug chip...
Friday, 23 December 2016 - 09:06
Studio help broken?? (Version: 7.0.1188 - )
So I have all of these packages installed on disk     But can't get to them unless I go to the the "Add and Remove contents". I'm sure they used to be visible in the...
Friday, 2 December 2016 - 18:16
Tiny817 memory mapped data in flash "doubt"
Haa that word doubt.....hey at least I'm doing something with the board.   So we can access data in flash using PM the old fashioned way. The DS says   The entire Flash...
Tuesday, 29 November 2016 - 23:19
Tiny817 USART_BAUD Whaaaat?
In the .def file please add USART0_BAUDL and USART0_BAUDH as per the datasheet as we don't have 16 bit GP registers and simply use USART0_BAUD.   The "Fractional baud rate...
Tuesday, 29 November 2016 - 21:00
Tiny817 Xplained Mini ISP header
So I'm a little confused with this.   I can see how the SPI/ISP header can nicely be used as a SPI header using PC5 as /SS even though PC3 is the real /SS pin.   But can...
Monday, 28 November 2016 - 07:09
Tiny817 unable to set clock prescaler
There is probably something I'm doing wrong trying to set a 1MHz clock.   The main clock fuse is set for 16 Mhz and the divider SHOULD BE set @16 but it is not happening....
Thursday, 24 November 2016 - 21:01

Pages