Trying to import an adruino project into Atmel Studio 7 but the "fastled" code won't compile.

Go To Last Post
64 posts / 0 new

Pages

Author
Message
#1
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0


See the errors at the bottom of the screen capture. Anybody has a solution to fix this?

 

  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

The output tab has better messages then the error tab!

Copy paste the first few lines that capture the first error!

 

 

(Possum Lodge oath) Quando omni flunkus, moritati.

"I thought growing old would take longer"

 

Last Edited: Wed. Jul 1, 2020 - 07:44 PM
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0


  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

Copy/Paste the text, you picture is unreadable if you want help.

 

Jim

 

 

(Possum Lodge oath) Quando omni flunkus, moritati.

"I thought growing old would take longer"

 

  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

C:\capunitHdrive.12\ArduinoSketch1\ArduinoSketch1\ArduinoCore\include\libraries\fastled\platforms\avr\led_sysdefs_avr.h(61,34): error: operator '>' has no left operand
         #if defined(ARDUINO) && (ARDUINO > 150) && !defined(IS_BEAN) && !defined (ARDUINO_AVR_DIGISPARK) && !defined (LIB8_TINY) && !defined (ARDUINO_AVR_LARDU_328E)
                                          ^
        make: *** [src/libraries/fastled/bitswap.o] Error 1
        "C:\Program Files (x86)\Atmel\Studio\7.0\toolchain\avr8\avr8-gnu-toolchain\bin\avr-g++.exe" -funsigned-char -funsigned-bitfields -DNDEBUG -DF_CPU=16000000L -DARDUINO= -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR -DUSB_VID=0x2341 -DUSB_PID=0x0043 -DUSB_MANUFACTURER="\"Arduino LLC\""  -I"C:\Program Files (x86)\Atmel\Studio\7.0\Packs\Atmel\ATmega_DFP\1.4.346\include" -I"..\include\libraries\Wire" -I"..\include\libraries\Wire\utility" -I"..\include\libraries\fastled" -I"..\include\libraries\fastled\lib8tion" -I"..\include\libraries\fastled\platforms\arm\common" -I"..\include\libraries\fastled\platforms\arm\d21" -I"..\include\libraries\fastled\platforms\arm\d51" -I"..\include\libraries\fastled\platforms\arm\k20" -I"..\include\libraries\fastled\platforms\arm\k66" -I"..\include\libraries\fastled\platforms\arm\kl26" -I"..\include\libraries\fastled\platforms\arm\mxrt1062" -I"..\include\libraries\fastled\platforms\arm\nrf51" -I"..\include\libraries\fastled\platforms\arm\nrf52" -I"..\include\libraries\fastled\platforms\arm\sam" -I"..\include\libraries\fastled\platforms\arm\stm32" -I"..\include\libraries\fastled\platforms\avr" -I"..\include\libraries\fastled\platforms\esp\32" -I"..\include\libraries\fastled\platforms\esp\8266" -I"..\include\core" -I"..\include\variants\standard"  -Os -fno-threadsafe-statics -ffunction-sections -fdata-sections -fpack-struct -fshort-enums -g2 -w -mmcu=atmega328p -B "C:\Program Files (x86)\Atmel\Studio\7.0\Packs\Atmel\ATmega_DFP\1.4.346\gcc\dev\atmega328p" -c -std=gnu++11 -MD -MP -MF "src/libraries/fastled/bitswap.d" -MT"src/libraries/fastled/bitswap.d" -MT"src/libraries/fastled/bitswap.o"   -o "src/libraries/fastled/bitswap.o" "../src/libraries/fastled/bitswap.cpp" 
C:\capunitHdrive.12\ArduinoSketch1\ArduinoSketch1\ArduinoCore\Release\Makefile(457,1): error: recipe for target 'src/libraries/fastled/bitswap.o' failed
        make: *** Waiting for unfinished jobs....
        Building file: ../src/libraries/fastled/colorpalettes.cpp
        Invoking: AVR8/GNU C Compiler : 5.4.0
        In file included from ..\include\libraries\fastled/led_sysdefs.h:37:0,
                         from ..\include\libraries\fastled/FastLED.h:41,
                         from ../src/libraries/fastled/colorpalettes.cpp:4:
C:\capunitHdrive.12\ArduinoSketch1\ArduinoSketch1\ArduinoCore\include\libraries\fastled\platforms\avr\led_sysdefs_avr.h(61,34): error: operator '>' has no left operand
         #if defined(ARDUINO) && (ARDUINO > 150) && !defined(IS_BEAN) && !defined (ARDUINO_AVR_DIGISPARK) && !defined (LIB8_TINY) && !defined (ARDUINO_AVR_LARDU_328E)
                                          ^
        make: *** [src/libraries/fastled/colorpalettes.o] Error 1
        "C:\Program Files (x86)\Atmel\Studio\7.0\toolchain\avr8\avr8-gnu-toolchain\bin\avr-g++.exe" -funsigned-char -funsigned-bitfields -DNDEBUG -DF_CPU=16000000L -DARDUINO= -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR -DUSB_VID=0x2341 -DUSB_PID=0x0043 -DUSB_MANUFACTURER="\"Arduino LLC\""  -I"C:\Program Files (x86)\Atmel\Studio\7.0\Packs\Atmel\ATmega_DFP\1.4.346\include" -I"..\include\libraries\Wire" -I"..\include\libraries\Wire\utility" -I"..\include\libraries\fastled" -I"..\include\libraries\fastled\lib8tion" -I"..\include\libraries\fastled\platforms\arm\common" -I"..\include\libraries\fastled\platforms\arm\d21" -I"..\include\libraries\fastled\platforms\arm\d51" -I"..\include\libraries\fastled\platforms\arm\k20" -I"..\include\libraries\fastled\platforms\arm\k66" -I"..\include\libraries\fastled\platforms\arm\kl26" -I"..\include\libraries\fastled\platforms\arm\mxrt1062" -I"..\include\libraries\fastled\platforms\arm\nrf51" -I"..\include\libraries\fastled\platforms\arm\nrf52" -I"..\include\libraries\fastled\platforms\arm\sam" -I"..\include\libraries\fastled\platforms\arm\stm32" -I"..\include\libraries\fastled\platforms\avr" -I"..\include\libraries\fastled\platforms\esp\32" -I"..\include\libraries\fastled\platforms\esp\8266" -I"..\include\core" -I"..\include\variants\standard"  -Os -fno-threadsafe-statics -ffunction-sections -fdata-sections -fpack-struct -fshort-enums -g2 -w -mmcu=atmega328p -B "C:\Program Files (x86)\Atmel\Studio\7.0\Packs\Atmel\ATmega_DFP\1.4.346\gcc\dev\atmega328p" -c -std=gnu++11 -MD -MP -MF "src/libraries/fastled/colorpalettes.d" -MT"src/libraries/fastled/colorpalettes.d" -MT"src/libraries/fastled/colorpalettes.o"   -o "src/libraries/fastled/colorpalettes.o" "../src/libraries/fastled/colorpalettes.cpp" 
C:\capunitHdrive.12\ArduinoSketch1\ArduinoSketch1\ArduinoCore\Release\Makefile(464,1): error: recipe for target 'src/libraries/fastled/colorpalettes.o' failed
        Building file: ../src/libraries/fastled/colorutils.cpp
        Invoking: AVR8/GNU C Compiler : 5.4.0
        In file included from ..\include\libraries\fastled/led_sysdefs.h:37:0,
                         from ..\include\libraries\fastled/FastLED.h:41,
                         from ../src/libraries/fastled/colorutils.cpp:7:
C:\capunitHdrive.12\ArduinoSketch1\ArduinoSketch1\ArduinoCore\include\libraries\fastled\platforms\avr\led_sysdefs_avr.h(61,34): error: operator '>' has no left operand
         #if defined(ARDUINO) && (ARDUINO > 150) && !defined(IS_BEAN) && !defined (ARDUINO_AVR_DIGISPARK) && !defined (LIB8_TINY) && !defined (ARDUINO_AVR_LARDU_328E)
                                          ^
        make: *** [src/libraries/fastled/colorutils.o] Error 1
        "C:\Program Files (x86)\Atmel\Studio\7.0\toolchain\avr8\avr8-gnu-toolchain\bin\avr-g++.exe" -funsigned-char -funsigned-bitfields -DNDEBUG -DF_CPU=16000000L -DARDUINO= -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR -DUSB_VID=0x2341 -DUSB_PID=0x0043 -DUSB_MANUFACTURER="\"Arduino LLC\""  -I"C:\Program Files (x86)\Atmel\Studio\7.0\Packs\Atmel\ATmega_DFP\1.4.346\include" -I"..\include\libraries\Wire" -I"..\include\libraries\Wire\utility" -I"..\include\libraries\fastled" -I"..\include\libraries\fastled\lib8tion" -I"..\include\libraries\fastled\platforms\arm\common" -I"..\include\libraries\fastled\platforms\arm\d21" -I"..\include\libraries\fastled\platforms\arm\d51" -I"..\include\libraries\fastled\platforms\arm\k20" -I"..\include\libraries\fastled\platforms\arm\k66" -I"..\include\libraries\fastled\platforms\arm\kl26" -I"..\include\libraries\fastled\platforms\arm\mxrt1062" -I"..\include\libraries\fastled\platforms\arm\nrf51" -I"..\include\libraries\fastled\platforms\arm\nrf52" -I"..\include\libraries\fastled\platforms\arm\sam" -I"..\include\libraries\fastled\platforms\arm\stm32" -I"..\include\libraries\fastled\platforms\avr" -I"..\include\libraries\fastled\platforms\esp\32" -I"..\include\libraries\fastled\platforms\esp\8266" -I"..\include\core" -I"..\include\variants\standard"  -Os -fno-threadsafe-statics -ffunction-sections -fdata-sections -fpack-struct -fshort-enums -g2 -w -mmcu=atmega328p -B "C:\Program Files (x86)\Atmel\Studio\7.0\Packs\Atmel\ATmega_DFP\1.4.346\gcc\dev\atmega328p" -c -std=gnu++11 -MD -MP -MF "src/libraries/fastled/colorutils.d" -MT"src/libraries/fastled/colorutils.d" -MT"src/libraries/fastled/colorutils.o"   -o "src/libraries/fastled/colorutils.o" "../src/libraries/fastled/colorutils.cpp" 
C:\capunitHdrive.12\ArduinoSketch1\ArduinoSketch1\ArduinoCore\Release\Makefile(471,1): error: recipe for target 'src/libraries/fastled/colorutils.o' failed
        Building file: ../src/libraries/fastled/FastLED.cpp
        Invoking: AVR8/GNU C Compiler : 5.4.0
        In file included from ..\include\libraries\fastled/led_sysdefs.h:37:0,
                         from ..\include\libraries\fastled/FastLED.h:41,
                         from ../src/libraries/fastled/FastLED.cpp:2:
C:\capunitHdrive.12\ArduinoSketch1\ArduinoSketch1\ArduinoCore\include\libraries\fastled\platforms\avr\led_sysdefs_avr.h(61,34): error: operator '>' has no left operand
         #if defined(ARDUINO) && (ARDUINO > 150) && !defined(IS_BEAN) && !defined (ARDUINO_AVR_DIGISPARK) && !defined (LIB8_TINY) && !defined (ARDUINO_AVR_LARDU_328E)
                                          ^
        make: *** [src/libraries/fastled/FastLED.o] Error 1
        "C:\Program Files (x86)\Atmel\Studio\7.0\toolchain\avr8\avr8-gnu-toolchain\bin\avr-g++.exe" -funsigned-char -funsigned-bitfields -DNDEBUG -DF_CPU=16000000L -DARDUINO= -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR -DUSB_VID=0x2341 -DUSB_PID=0x0043 -DUSB_MANUFACTURER="\"Arduino LLC\""  -I"C:\Program Files (x86)\Atmel\Studio\7.0\Packs\Atmel\ATmega_DFP\1.4.346\include" -I"..\include\libraries\Wire" -I"..\include\libraries\Wire\utility" -I"..\include\libraries\fastled" -I"..\include\libraries\fastled\lib8tion" -I"..\include\libraries\fastled\platforms\arm\common" -I"..\include\libraries\fastled\platforms\arm\d21" -I"..\include\libraries\fastled\platforms\arm\d51" -I"..\include\libraries\fastled\platforms\arm\k20" -I"..\include\libraries\fastled\platforms\arm\k66" -I"..\include\libraries\fastled\platforms\arm\kl26" -I"..\include\libraries\fastled\platforms\arm\mxrt1062" -I"..\include\libraries\fastled\platforms\arm\nrf51" -I"..\include\libraries\fastled\platforms\arm\nrf52" -I"..\include\libraries\fastled\platforms\arm\sam" -I"..\include\libraries\fastled\platforms\arm\stm32" -I"..\include\libraries\fastled\platforms\avr" -I"..\include\libraries\fastled\platforms\esp\32" -I"..\include\libraries\fastled\platforms\esp\8266" -I"..\include\core" -I"..\include\variants\standard"  -Os -fno-threadsafe-statics -ffunction-sections -fdata-sections -fpack-struct -fshort-enums -g2 -w -mmcu=atmega328p -B "C:\Program Files (x86)\Atmel\Studio\7.0\Packs\Atmel\ATmega_DFP\1.4.346\gcc\dev\atmega328p" -c -std=gnu++11 -MD -MP -MF "src/libraries/fastled/FastLED.d" -MT"src/libraries/fastled/FastLED.d" -MT"src/libraries/fastled/FastLED.o"   -o "src/libraries/fastled/FastLED.o" "../src/libraries/fastled/FastLED.cpp" 
C:\capunitHdrive.12\ArduinoSketch1\ArduinoSketch1\ArduinoCore\Release\Makefile(478,1): error: recipe for target 'src/libraries/fastled/FastLED.o' failed
        Building file: ../src/libraries/fastled/hsv2rgb.cpp
        Invoking: AVR8/GNU C Compiler : 5.4.0
        In file included from ..\include\libraries\fastled/led_sysdefs.h:37:0,
                         from ..\include\libraries\fastled/FastLED.h:41,
                         from ../src/libraries/fastled/hsv2rgb.cpp:4:
C:\capunitHdrive.12\ArduinoSketch1\ArduinoSketch1\ArduinoCore\include\libraries\fastled\platforms\avr\led_sysdefs_avr.h(61,34): error: operator '>' has no left operand
         #if defined(ARDUINO) && (ARDUINO > 150) && !defined(IS_BEAN) && !defined (ARDUINO_AVR_DIGISPARK) && !defined (LIB8_TINY) && !defined (ARDUINO_AVR_LARDU_328E)

  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

paulsnop wrote:
C:\capunitHdrive.12\ArduinoSketch1\ArduinoSketch1\ArduinoCore\include\libraries\fastled\platforms\avr\led_sysdefs_avr.h(61,34): error: operator '>' has no left operand
         #if defined(ARDUINO) && (ARDUINO > 150) && !defined(IS_BEAN) && !defined (ARDUINO_AVR_DIGISPARK) && !defined (LIB8_TINY) && !defined (ARDUINO_AVR_LARDU_328E)
                                          ^

 

Track the source down for this file and find the missing parts.

 

Something did not copy over completely would be my guess.

 

Jim

 

 

(Possum Lodge oath) Quando omni flunkus, moritati.

"I thought growing old would take longer"

 

  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

I don't know what you mean by "track the source down for this file and find the missing parts"

  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

Is this any better

 

C:\capunitHdrive.12\ArduinoSketch1\ArduinoSketch1\ArduinoCore\include\libraries\fastled\platforms\avr\led_sysdefs_avr.h(61,34): error: operator '>' has no left operand
         #if defined(ARDUINO) && (ARDUINO > 150) && !defined(IS_BEAN) && !defined (ARDUINO_AVR_DIGISPARK) && !defined (LIB8_TINY) && !defined (ARDUINO_AVR_LARDU_328E)
                                          ^
        make: *** [src/libraries/fastled/bitswap.o] Error 1
        "C:\Program Files (x86)\Atmel\Studio\7.0\toolchain\avr8\avr8-gnu-toolchain\bin\avr-g++.exe" -funsigned-char -funsigned-bitfields -DNDEBUG -DF_CPU=16000000L -DARDUINO= -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR -DUSB_VID=0x2341 -DUSB_PID=0x0043 -DUSB_MANUFACTURER="\"Arduino LLC\""  -I"C:\Program Files (x86)\Atmel\Studio\7.0\Packs\Atmel\ATmega_DFP\1.4.346\include" -I"..\include\libraries\Wire" -I"..\include\libraries\Wire\utility" -I"..\include\libraries\fastled" -I"..\include\libraries\fastled\lib8tion" -I"..\include\libraries\fastled\platforms\arm\common" -I"..\include\libraries\fastled\platforms\arm\d21" -I"..\include\libraries\fastled\platforms\arm\d51" -I"..\include\libraries\fastled\platforms\arm\k20" -I"..\include\libraries\fastled\platforms\arm\k66" -I"..\include\libraries\fastled\platforms\arm\kl26" -I"..\include\libraries\fastled\platforms\arm\mxrt1062" -I"..\include\libraries\fastled\platforms\arm\nrf51" -I"..\include\libraries\fastled\platforms\arm\nrf52" -I"..\include\libraries\fastled\platforms\arm\sam" -I"..\include\libraries\fastled\platforms\arm\stm32" -I"..\include\libraries\fastled\platforms\avr" -I"..\include\libraries\fastled\platforms\esp\32" -I"..\include\libraries\fastled\platforms\esp\8266" -I"..\include\core" -I"..\include\variants\standard"  -Os -fno-threadsafe-statics -ffunction-sections -fdata-sections -fpack-struct -fshort-enums -g2 -w -mmcu=atmega328p -B "C:\Program Files (x86)\Atmel\Studio\7.0\Packs\Atmel\ATmega_DFP\1.4.346\gcc\dev\atmega328p" -c -std=gnu++11 -MD -MP -MF "src/libraries/fastled/bitswap.d" -MT"src/libraries/fastled/bitswap.d" -MT"src/libraries/fastled/bitswap.o"   -o "src/libraries/fastled/bitswap.o" "../src/libraries/fastled/bitswap.cpp" 
C:\capunitHdrive.12\ArduinoSketch1\ArduinoSketch1\ArduinoCore\Release\Makefile(457,1): error: recipe for target 'src/libraries/fastled/bitswap.o' failed
        make: *** Waiting for unfinished jobs....
        Building file: ../src/libraries/fastled/colorpalettes.cpp
        Invoking: AVR8/GNU C Compiler : 5.4.0
        In file included from ..\include\libraries\fastled/led_sysdefs.h:37:0,
                         from ..\include\libraries\fastled/FastLED.h:41,
                         from ../src/libraries/fastled/colorpalettes.cpp:4:
C:\capunitHdrive.12\ArduinoSketch1\ArduinoSketch1\ArduinoCore\include\libraries\fastled\platforms\avr\led_sysdefs_avr.h(61,34): error: operator '>' has no left operand
         #if defined(ARDUINO) && (ARDUINO > 150) && !defined(IS_BEAN) && !defined (ARDUINO_AVR_DIGISPARK) && !defined (LIB8_TINY) && !defined (ARDUINO_AVR_LARDU_328E)
                                          ^
        make: *** [src/libraries/fastled/colorpalettes.o] Error 1
        "C:\Program Files (x86)\Atmel\Studio\7.0\toolchain\avr8\avr8-gnu-toolchain\bin\avr-g++.exe" -funsigned-char -funsigned-bitfields -DNDEBUG -DF_CPU=16000000L -DARDUINO= -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR -DUSB_VID=0x2341 -DUSB_PID=0x0043 -DUSB_MANUFACTURER="\"Arduino LLC\""  -I"C:\Program Files (x86)\Atmel\Studio\7.0\Packs\Atmel\ATmega_DFP\1.4.346\include" -I"..\include\libraries\Wire" -I"..\include\libraries\Wire\utility" -I"..\include\libraries\fastled" -I"..\include\libraries\fastled\lib8tion" -I"..\include\libraries\fastled\platforms\arm\common" -I"..\include\libraries\fastled\platforms\arm\d21" -I"..\include\libraries\fastled\platforms\arm\d51" -I"..\include\libraries\fastled\platforms\arm\k20" -I"..\include\libraries\fastled\platforms\arm\k66" -I"..\include\libraries\fastled\platforms\arm\kl26" -I"..\include\libraries\fastled\platforms\arm\mxrt1062" -I"..\include\libraries\fastled\platforms\arm\nrf51" -I"..\include\libraries\fastled\platforms\arm\nrf52" -I"..\include\libraries\fastled\platforms\arm\sam" -I"..\include\libraries\fastled\platforms\arm\stm32" -I"..\include\libraries\fastled\platforms\avr" -I"..\include\libraries\fastled\platforms\esp\32" -I"..\include\libraries\fastled\platforms\esp\8266" -I"..\include\core" -I"..\include\variants\standard"  -Os -fno-threadsafe-statics -ffunction-sections -fdata-sections -fpack-struct -fshort-enums -g2 -w -mmcu=atmega328p -B "C:\Program Files (x86)\Atmel\Studio\7.0\Packs\Atmel\ATmega_DFP\1.4.346\gcc\dev\atmega328p" -c -std=gnu++11 -MD -MP -MF "src/libraries/fastled/colorpalettes.d" -MT"src/libraries/fastled/colorpalettes.d" -MT"src/libraries/fastled/colorpalettes.o"   -o "src/libraries/fastled/colorpalettes.o" "../src/libraries/fastled/colorpalettes.cpp" 
C:\capunitHdrive.12\ArduinoSketch1\ArduinoSketch1\ArduinoCore\Release\Makefile(464,1): error: recipe for target 'src/libraries/fastled/colorpalettes.o' failed
        Building file: ../src/libraries/fastled/colorutils.cpp
        Invoking: AVR8/GNU C Compiler : 5.4.0
        In file included from ..\include\libraries\fastled/led_sysdefs.h:37:0,
                         from ..\include\libraries\fastled/FastLED.h:41,
                         from ../src/libraries/fastled/colorutils.cpp:7:
C:\capunitHdrive.12\ArduinoSketch1\ArduinoSketch1\ArduinoCore\include\libraries\fastled\platforms\avr\led_sysdefs_avr.h(61,34): error: operator '>' has no left operand
         #if defined(ARDUINO) && (ARDUINO > 150) && !defined(IS_BEAN) && !defined (ARDUINO_AVR_DIGISPARK) && !defined (LIB8_TINY) && !defined (ARDUINO_AVR_LARDU_328E)
                                          ^
        make: *** [src/libraries/fastled/colorutils.o] Error 1
        "C:\Program Files (x86)\Atmel\Studio\7.0\toolchain\avr8\avr8-gnu-toolchain\bin\avr-g++.exe" -funsigned-char -funsigned-bitfields -DNDEBUG -DF_CPU=16000000L -DARDUINO= -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR -DUSB_VID=0x2341 -DUSB_PID=0x0043 -DUSB_MANUFACTURER="\"Arduino LLC\""  -I"C:\Program Files (x86)\Atmel\Studio\7.0\Packs\Atmel\ATmega_DFP\1.4.346\include" -I"..\include\libraries\Wire" -I"..\include\libraries\Wire\utility" -I"..\include\libraries\fastled" -I"..\include\libraries\fastled\lib8tion" -I"..\include\libraries\fastled\platforms\arm\common" -I"..\include\libraries\fastled\platforms\arm\d21" -I"..\include\libraries\fastled\platforms\arm\d51" -I"..\include\libraries\fastled\platforms\arm\k20" -I"..\include\libraries\fastled\platforms\arm\k66" -I"..\include\libraries\fastled\platforms\arm\kl26" -I"..\include\libraries\fastled\platforms\arm\mxrt1062" -I"..\include\libraries\fastled\platforms\arm\nrf51" -I"..\include\libraries\fastled\platforms\arm\nrf52" -I"..\include\libraries\fastled\platforms\arm\sam" -I"..\include\libraries\fastled\platforms\arm\stm32" -I"..\include\libraries\fastled\platforms\avr" -I"..\include\libraries\fastled\platforms\esp\32" -I"..\include\libraries\fastled\platforms\esp\8266" -I"..\include\core" -I"..\include\variants\standard"  -Os -fno-threadsafe-statics -ffunction-sections -fdata-sections -fpack-struct -fshort-enums -g2 -w -mmcu=atmega328p -B "C:\Program Files (x86)\Atmel\Studio\7.0\Packs\Atmel\ATmega_DFP\1.4.346\gcc\dev\atmega328p" -c -std=gnu++11 -MD -MP -MF "src/libraries/fastled/colorutils.d" -MT"src/libraries/fastled/colorutils.d" -MT"src/libraries/fastled/colorutils.o"   -o "src/libraries/fastled/colorutils.o" "../src/libraries/fastled/colorutils.cpp" 
C:\capunitHdrive.12\ArduinoSketch1\ArduinoSketch1\ArduinoCore\Release\Makefile(471,1): error: recipe for target 'src/libraries/fastled/colorutils.o' failed
        Building file: ../src/libraries/fastled/FastLED.cpp
        Invoking: AVR8/GNU C Compiler : 5.4.0
        In file included from ..\include\libraries\fastled/led_sysdefs.h:37:0,
                         from ..\include\libraries\fastled/FastLED.h:41,
                         from ../src/libraries/fastled/FastLED.cpp:2:
C:\capunitHdrive.12\ArduinoSketch1\ArduinoSketch1\ArduinoCore\include\libraries\fastled\platforms\avr\led_sysdefs_avr.h(61,34): error: operator '>' has no left operand
         #if defined(ARDUINO) && (ARDUINO > 150) && !defined(IS_BEAN) && !defined (ARDUINO_AVR_DIGISPARK) && !defined (LIB8_TINY) && !defined (ARDUINO_AVR_LARDU_328E)
                                          ^
        make: *** [src/libraries/fastled/FastLED.o] Error 1
        "C:\Program Files (x86)\Atmel\Studio\7.0\toolchain\avr8\avr8-gnu-toolchain\bin\avr-g++.exe" -funsigned-char -funsigned-bitfields -DNDEBUG -DF_CPU=16000000L -DARDUINO= -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR -DUSB_VID=0x2341 -DUSB_PID=0x0043 -DUSB_MANUFACTURER="\"Arduino LLC\""  -I"C:\Program Files (x86)\Atmel\Studio\7.0\Packs\Atmel\ATmega_DFP\1.4.346\include" -I"..\include\libraries\Wire" -I"..\include\libraries\Wire\utility" -I"..\include\libraries\fastled" -I"..\include\libraries\fastled\lib8tion" -I"..\include\libraries\fastled\platforms\arm\common" -I"..\include\libraries\fastled\platforms\arm\d21" -I"..\include\libraries\fastled\platforms\arm\d51" -I"..\include\libraries\fastled\platforms\arm\k20" -I"..\include\libraries\fastled\platforms\arm\k66" -I"..\include\libraries\fastled\platforms\arm\kl26" -I"..\include\libraries\fastled\platforms\arm\mxrt1062" -I"..\include\libraries\fastled\platforms\arm\nrf51" -I"..\include\libraries\fastled\platforms\arm\nrf52" -I"..\include\libraries\fastled\platforms\arm\sam" -I"..\include\libraries\fastled\platforms\arm\stm32" -I"..\include\libraries\fastled\platforms\avr" -I"..\include\libraries\fastled\platforms\esp\32" -I"..\include\libraries\fastled\platforms\esp\8266" -I"..\include\core" -I"..\include\variants\standard"  -Os -fno-threadsafe-statics -ffunction-sections -fdata-sections -fpack-struct -fshort-enums -g2 -w -mmcu=atmega328p -B "C:\Program Files (x86)\Atmel\Studio\7.0\Packs\Atmel\ATmega_DFP\1.4.346\gcc\dev\atmega328p" -c -std=gnu++11 -MD -MP -MF "src/libraries/fastled/FastLED.d" -MT"src/libraries/fastled/FastLED.d" -MT"src/libraries/fastled/FastLED.o"   -o "src/libraries/fastled/FastLED.o" "../src/libraries/fastled/FastLED.cpp" 
C:\capunitHdrive.12\ArduinoSketch1\ArduinoSketch1\ArduinoCore\Release\Makefile(478,1): error: recipe for target 'src/libraries/fastled/FastLED.o' failed
        Building file: ../src/libraries/fastled/hsv2rgb.cpp
        Invoking: AVR8/GNU C Compiler : 5.4.0
        In file included from ..\include\libraries\fastled/led_sysdefs.h:37:0,
                         from ..\include\libraries\fastled/FastLED.h:41,
                         from ../src/libraries/fastled/hsv2rgb.cpp:4:
C:\capunitHdrive.12\ArduinoSketch1\ArduinoSketch1\ArduinoCore\include\libraries\fastled\platforms\avr\led_sysdefs_avr.h(61,34): error: operator '>' has no left operand
         #if defined(ARDUINO) && (ARDUINO > 150) && !defined(IS_BEAN) && !defined (ARDUINO_AVR_DIGISPARK) && !defined (LIB8_TINY) && !defined (ARDUINO_AVR_LARDU_328E)
                                          ^

  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

Lets back up a bit, did this project compile ok in the arduino IDE?

 

 

(Possum Lodge oath) Quando omni flunkus, moritati.

"I thought growing old would take longer"

 

Last Edited: Wed. Jul 1, 2020 - 08:15 PM
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

Yes

  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

ki0bk wrote:

led_sysdefs_avr.h

ok, this file seems to be corrupted, find it in the arduino project and replace it in your AS7 project.

See if it will build.

 

(Possum Lodge oath) Quando omni flunkus, moritati.

"I thought growing old would take longer"

 

  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

ok I'll try that.

Thanks for your quick response.

  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

It looks like the project in Atmel Studio references the same file in the same location as the Adruino IDE at :

C:\capunitHdrive.12\ArduinoSketch1\ArduinoSketch1\ArduinoCore\include\libraries\fastled\led_sysdefs.h

  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

Sorry, I just noticed that I am looking at the wrong file

  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

That file "led_sysdefs_avr.h" also seems to be in the same location for both IDE's

  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

downloaded a clean copy of this file and replaced it in the Atmel Studio project and I still get the same errors

  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 1

But you must IMPORT the project into AS7 not just copy files.

 

EDIT and having said that I no longer see an option to import an Arduino project into Studio blush I'm sure it existed last time I used an Arduino project, but my memory could be failing me.

John Samperi

Ampertronics Pty. Ltd.

www.ampertronics.com.au

* Electronic Design * Custom Products * Contract Assembly

Last Edited: Wed. Jul 1, 2020 - 10:33 PM
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0


OK it is still there but not where I was looking.

 

 

and related You tube video https://www.youtube.com/watch?v=...

John Samperi

Ampertronics Pty. Ltd.

www.ampertronics.com.au

* Electronic Design * Custom Products * Contract Assembly

  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

That's exactly what I did a few minutes ago and I get different  error:s

C:\ArduinoSketch1\ArduinoSketch1\ArduinoCore\Debug\Makefile(457,1): error: recipe for target 'src/libraries/fastled/bitswap.o' failed
C:\ArduinoSketch1\ArduinoSketch1\ArduinoCore\include\libraries\fastled\platforms\avr\clockless_trinket.h(326,24): error: expected primary-expression before '__attribute__'
         #define FL_FALLTHROUGH __attribute__ ((fallthrough));
                                ^
C:\ArduinoSketch1\ArduinoSketch1\ArduinoCore\include\libraries\fastled\platforms\avr\clockless_trinket.h(409,55): info: in expansion of macro 'FL_FALLTHROUGH'
              case 4: _D2(0) LO1 _D3(0) HI1 _D1(1) QLO2(b0,0)  FL_FALLTHROUGH
                                                               ^
C:\ArduinoSketch1\ArduinoSketch1\ArduinoCore\include\libraries\fastled\platforms\avr\clockless_trinket.h(326,24): error: expected primary-expression before '__attribute__'
         #define FL_FALLTHROUGH __attribute__ ((fallthrough));
                                ^
C:\ArduinoSketch1\ArduinoSketch1\ArduinoCore\include\libraries\fastled\platforms\avr\clockless_trinket.h(410,55): info: in expansion of macro 'FL_FALLTHROUGH'
              case 3: _D2(0) LO1 _D3(0) HI1 _D1(1) QLO2(b0,0)  FL_FALLTHROUGH
                                                               ^
C:\ArduinoSketch1\ArduinoSketch1\ArduinoCore\include\libraries\fastled\platforms\avr\clockless_trinket.h(326,24): error: expected primary-expression before '__attribute__'
         #define FL_FALLTHROUGH __attribute__ ((fallthrough));
                                ^
C:\ArduinoSketch1\ArduinoSketch1\ArduinoCore\include\libraries\fastled\platforms\avr\clockless_trinket.h(411,55): info: in expansion of macro 'FL_FALLTHROUGH'
              case 2: _D2(0) LO1 _D3(0) HI1 _D1(1) QLO2(b0,0)  FL_FALLTHROUGH
                                                               ^
C:\ArduinoSketch1\ArduinoSketch1\ArduinoCore\include\libraries\fastled\platforms\avr\clockless_trinket.h(326,24): error: expected primary-expression before '__attribute__'
         #define FL_FALLTHROUGH __attribute__ ((fallthrough));
                                ^
C:\ArduinoSketch1\ArduinoSketch1\ArduinoCore\include\libraries\fastled\platforms\avr\clockless_trinket.h(425,55): info: in expansion of macro 'FL_FALLTHROUGH'
              case 4: _D2(0) LO1 _D3(0) HI1 _D1(1) QLO2(b0,0)  FL_FALLTHROUGH
                                                               ^
C:\ArduinoSketch1\ArduinoSketch1\ArduinoCore\include\libraries\fastled\platforms\avr\clockless_trinket.h(326,24): error: expected primary-expression before '__attribute__'
         #define FL_FALLTHROUGH __attribute__ ((fallthrough));
                                ^
C:\ArduinoSketch1\ArduinoSketch1\ArduinoCore\include\libraries\fastled\platforms\avr\clockless_trinket.h(426,55): info: in expansion of macro 'FL_FALLTHROUGH'
              case 3: _D2(0) LO1 _D3(0) HI1 _D1(1) QLO2(b0,0)  FL_FALLTHROUGH
                                                               ^
C:\ArduinoSketch1\ArduinoSketch1\ArduinoCore\include\libraries\fastled\platforms\avr\clockless_trinket.h(326,24): error: expected primary-expression before '__attribute__'
         #define FL_FALLTHROUGH __attribute__ ((fallthrough));
                                ^
C:\ArduinoSketch1\ArduinoSketch1\ArduinoCore\include\libraries\fastled\platforms\avr\clockless_trinket.h(427,55): info: in expansion of macro 'FL_FALLTHROUGH'
              case 2: _D2(0) LO1 _D3(0) HI1 _D1(1) QLO2(b0,0)  FL_FALLTHROUGH
                                                               ^
C:\ArduinoSketch1\ArduinoSketch1\ArduinoCore\include\libraries\fastled\platforms\avr\clockless_trinket.h(326,24): error: expected primary-expression before '__attribute__'
 

  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

there are many more erros of the same type for all the fastled library files

  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0


I have downloaded Arduino 1.812 and the fastled library, tried the blink example. No cigar, Studio is looking for the fastled.h file which is there in the library folders.

 

So there is something I'm missing but I'm not an Arduino expert. Sorry sad

John Samperi

Ampertronics Pty. Ltd.

www.ampertronics.com.au

* Electronic Design * Custom Products * Contract Assembly

  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

Is the "Import Arduino Sketch" controlled from some sort of script that users could potentially fix?

It doesn't seem to work very well, for a lot of "Arduino-like" boards (doesn't copy extra CMSIS files for various SAMD21 boards, thinks the CPU for SAMD51-based boards is "Cortex-M4", etc.  Plus this example.)

 

  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

Something seems screwy but I have burned more than enough neurons on this without success. sad

 

If you look at the solution in AS7 you may see that the Arduino core library has a yellow exclamation mark on it and that seems the main cause of the problems (at least it seems to be for me).

 

Also the fastLED library gets installed in the Document>Arduino>library folder rather than in the program files x86 folder where the other libraries are residing. The Arduino IDE seems happy enough with this but looks like Studio may not be as happy, no idea.

 

I have deleted the project folder a few times and started again, the screen shot above only complains about the .h file but all the rest of the attempts I get a zillion errors like you do, my guess is due to the Arduino core not getting imported.

John Samperi

Ampertronics Pty. Ltd.

www.ampertronics.com.au

* Electronic Design * Custom Products * Contract Assembly

  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0


haha I accidentally (ie no idea what I did) fixed it, at least on my WIn7 machine, did not work on the Win10 machine.

 

I compiled the Arduino core project on it's own and then the Blinky project.

 

As you can see the Arduino core in the Blinky project doesn't have the Yellow exclamation mark anymore and I got a hex file.

 

BEFORE

 

 

AFTER

 

 

John Samperi

Ampertronics Pty. Ltd.

www.ampertronics.com.au

* Electronic Design * Custom Products * Contract Assembly

  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

Imported 2 more projects (Cylon and Colourpalette) and they just compiled perfectly as a solution, go figure! May try on the Win10 machine another day.

John Samperi

Ampertronics Pty. Ltd.

www.ampertronics.com.au

* Electronic Design * Custom Products * Contract Assembly

  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

westfw wrote:
It doesn't seem to work very well, for a lot of "Arduino-like" boards

I think this has been noted previously: it's just a "get you going" facility for fairly simple "sketches" on standard, "mainstream" Arduinoes - it's not intended as an all-singing, all-dancing universal solution.

 

So, if it works, be happy; if it doesn't, just move on.

 

 

Top Tips:

  1. How to properly post source code - see: https://www.avrfreaks.net/comment... - also how to properly include images/pictures
  2. "Garbage" characters on a serial terminal are (almost?) invariably due to wrong baud rate - see: https://learn.sparkfun.com/tutorials/serial-communication
  3. Wrong baud rate is usually due to not running at the speed you thought; check by blinking a LED to see if you get the speed you expected
  4. Difference between a crystal, and a crystal oscillatorhttps://www.avrfreaks.net/comment...
  5. When your question is resolved, mark the solution: https://www.avrfreaks.net/comment...
  6. Beginner's "Getting Started" tips: https://www.avrfreaks.net/comment...
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

In #6, ki0bk wrote:

paulsnop wrote:
C:\capunitHdrive.12\ArduinoSketch1\ArduinoSketch1\ArduinoCore\include\libraries\fastled\platforms\avr\led_sysdefs_avr.h(61,34): error: operator '>' has no left operand
         #if defined(ARDUINO) && (ARDUINO > 150) && !defined(IS_BEAN) && !defined (ARDUINO_AVR_DIGISPARK) && !defined (LIB8_TINY) && !defined (ARDUINO_AVR_LARDU_328E)
                                          ^

Track the source down for this file and find the missing parts.

 

In reply, paulsnop wrote:
I don't know what you mean by "track the source down for this file and find the missing parts"

He means you need to find the actual location within the source file that this is referring to:

 

The error message ("diagnostic") tells you exactly where the reported error was detected, and what was wrong:

C:\capunitHdrive.12\ArduinoSketch1\ArduinoSketch1\ArduinoCore\include\libraries\fastled\platforms\avr\led_sysdefs_avr.h( 61 , 34 ): error:  operator '>' has no left operand 

  • The name of the source  file where it was found:  led_sysdefs_avr.h
  • The line number within that file:  61 
  • The column number within that line:  34 
  • The details of the error:  operator '>' has no left operand 

 

In an IDE like studio, you can just double-click on that message, and it will take you to the relevant position in that file

 

The message also gives you a pointer showing that position within the actual source line:

#if defined(ARDUINO) && (ARDUINO > 150) && !defined(IS_BEAN) && !defined (ARDUINO_AVR_DIGISPARK) && !defined (LIB8_TINY) && !defined (ARDUINO_AVR_LARDU_328E)
                                 ^   

So there you can see the '>' operator.

 

The message says there is "no left operand" to that operator - so there must be something wrong with the definition of "ARDUINO" which appears to the left of that operator.

 

So your next step is to find out why  "ARDUINO" there is not giving a proper left operand for the '>' ...

 

#HowToReadGccDiagnostics 

 

Top Tips:

  1. How to properly post source code - see: https://www.avrfreaks.net/comment... - also how to properly include images/pictures
  2. "Garbage" characters on a serial terminal are (almost?) invariably due to wrong baud rate - see: https://learn.sparkfun.com/tutorials/serial-communication
  3. Wrong baud rate is usually due to not running at the speed you thought; check by blinking a LED to see if you get the speed you expected
  4. Difference between a crystal, and a crystal oscillatorhttps://www.avrfreaks.net/comment...
  5. When your question is resolved, mark the solution: https://www.avrfreaks.net/comment...
  6. Beginner's "Getting Started" tips: https://www.avrfreaks.net/comment...
Last Edited: Thu. Jul 2, 2020 - 08:44 AM
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

In #9, ki0bk wrote:
did this project compile ok in the arduino IDE?

paulsnop wrote:
Yes

So why not stick with the Arduino IDE?

 

 

 

Top Tips:

  1. How to properly post source code - see: https://www.avrfreaks.net/comment... - also how to properly include images/pictures
  2. "Garbage" characters on a serial terminal are (almost?) invariably due to wrong baud rate - see: https://learn.sparkfun.com/tutorials/serial-communication
  3. Wrong baud rate is usually due to not running at the speed you thought; check by blinking a LED to see if you get the speed you expected
  4. Difference between a crystal, and a crystal oscillatorhttps://www.avrfreaks.net/comment...
  5. When your question is resolved, mark the solution: https://www.avrfreaks.net/comment...
  6. Beginner's "Getting Started" tips: https://www.avrfreaks.net/comment...
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

Can I ask an odd ball question: what is the point of importing the sketch to AS7 anyway? If the Arduino IDE builds it OK why not stick with that?

  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

Seems it has been done:  https://github.com/FastLED/FastLED/issues/220

 

Have you tried looking on http://fastled.io/+ as suggested ?

Top Tips:

  1. How to properly post source code - see: https://www.avrfreaks.net/comment... - also how to properly include images/pictures
  2. "Garbage" characters on a serial terminal are (almost?) invariably due to wrong baud rate - see: https://learn.sparkfun.com/tutorials/serial-communication
  3. Wrong baud rate is usually due to not running at the speed you thought; check by blinking a LED to see if you get the speed you expected
  4. Difference between a crystal, and a crystal oscillatorhttps://www.avrfreaks.net/comment...
  5. When your question is resolved, mark the solution: https://www.avrfreaks.net/comment...
  6. Beginner's "Getting Started" tips: https://www.avrfreaks.net/comment...
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

paulsnop wrote:
there are many more erros of the same type

 there seems to be something fundamentally wrong with the preprocessor defines!

Top Tips:

  1. How to properly post source code - see: https://www.avrfreaks.net/comment... - also how to properly include images/pictures
  2. "Garbage" characters on a serial terminal are (almost?) invariably due to wrong baud rate - see: https://learn.sparkfun.com/tutorials/serial-communication
  3. Wrong baud rate is usually due to not running at the speed you thought; check by blinking a LED to see if you get the speed you expected
  4. Difference between a crystal, and a crystal oscillatorhttps://www.avrfreaks.net/comment...
  5. When your question is resolved, mark the solution: https://www.avrfreaks.net/comment...
  6. Beginner's "Getting Started" tips: https://www.avrfreaks.net/comment...
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0


Wonder what I did differently? It built first time for me when I use "Rebuild Solution"...

 

  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

clawson wrote:
Wonder what I did differently?

Could you post your build output for comparison?

 

in #31, I wrote:
 there seems to be something fundamentally wrong with the preprocessor defines!

 

looking back,

 

In #5, paulsnop wrote:

        "C:\Program Files (x86)\Atmel\Studio\7.0\toolchain\avr8\avr8-gnu-toolchain\bin\avr-g++.exe" -funsigned-char -funsigned-bitfields -DNDEBUG -DF_CPU=16000000L -DARDUINO= -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR -DUSB_VID=0x2341 -DUSB_PID=0x0043 -DUSB_MANUFACTURER="\"Arduino LLC\""  -I"C:\Program Files (x86)\Atmel\Studio\7.0\Packs\Atmel\ATmega_DFP\1.4.346\include" -I"..\include\libraries\Wire" -I"..\include\libraries\Wire\utility" -I"..\include\libraries\fastled" -I"..\include\libraries\fastled\lib8tion" -I"..\include\libraries\fastled\platforms\arm\common" -I"..\include\libraries\fastled\platforms\arm\d21" -I"..\include\libraries\fastled\platforms\arm\d51" -I"..\include\libraries\fastled\platforms\arm\k20" -I"..\include\libraries\fastled\platforms\arm\k66" -I"..\include\libraries\fastled\platforms\arm\kl26" -I"..\include\libraries\fastled\platforms\arm\mxrt1062" -I"..\include\libraries\fastled\platforms\arm\nrf51" -I"..\include\libraries\fastled\platforms\arm\nrf52" -I"..\include\libraries\fastled\platforms\arm\sam" -I"..\include\libraries\fastled\platforms\arm\stm32" -I"..\include\libraries\fastled\platforms\avr" -I"..\include\libraries\fastled\platforms\esp\32" -I"..\include\libraries\fastled\platforms\esp\8266" -I"..\include\core" -I"..\include\variants\standard"  -Os -fno-threadsafe-statics -ffunction-sections -fdata-sections -fpack-struct -fshort-enums -g2 -w -mmcu=atmega328p -B "C:\Program Files (x86)\Atmel\Studio\7.0\Packs\Atmel\ATmega_DFP\1.4.346\gcc\dev\atmega328p" -c -std=gnu++11 -MD -MP -MF "src/libraries/fastled/bitswap.d" -MT"src/libraries/fastled/bitswap.d" -MT"src/libraries/fastled/bitswap.o"   -o "src/libraries/fastled/bitswap.o" "../src/libraries/fastled/bitswap.cpp" 
C:\capunitHdrive.12\ArduinoSketch1\ArduinoSketch1\ArduinoCore\Release\Makefile(457,1): error: recipe for target 'src/libraries/fastled/bitswap.o' failed
        make: *** Waiting for unfinished jobs....
        Building file: ../src/libraries/fastled/colorpalettes.cpp
        Invoking: AVR8/GNU C Compiler : 5.4.0
        In file included from ..\include\libraries\fastled/led_sysdefs.h:37:0,
                         from ..\include\libraries\fastled/FastLED.h:41,
                         from ../src/libraries/fastled/colorpalettes.cpp:4:
C:\capunitHdrive.12\ArduinoSketch1\ArduinoSketch1\ArduinoCore\include\libraries\fastled\platforms\avr\led_sysdefs_avr.h(61,34): error: operator '>' has no left operand
         #if defined(ARDUINO) && (ARDUINO > 150) && !defined(IS_BEAN) && !defined (ARDUINO_AVR_DIGISPARK) && !defined (LIB8_TINY) && !defined (ARDUINO_AVR_LARDU_328E)
                                          ^ 

 

So the ARDUINO definition is wrong!

 

EDIT

 

explanation for  paulsnop  :

-DARDUINO= 

 means that ARDUINO is defined to be nothing.

 

so the preprocessor will expand this:

#if defined(ARDUINO) && (ARDUINO > 150) && !defined(IS_BEAN) && !defined (ARDUINO_AVR_DIGISPARK) && !defined (LIB8_TINY) && !defined (ARDUINO_AVR_LARDU_328E)

 

to become:

#if defined() && (> 150) && !defined(IS_BEAN) && !defined (ARDUINO_AVR_DIGISPARK) && !defined (LIB8_TINY) && !defined (ARDUINO_AVR_LARDU_328E)

and now you can clearly see why the compiler says, "operator '>' has no left operand" !

 

(I haven't worked through all the other defines)

 

EDIT 2

 

In clawson's build output (#34, below), you can see

 

		"C:\Program Files (x86)\Atmel\Studio\7.0\toolchain\avr8\avr8-gnu-toolchain\bin\avr-g++.exe" -funsigned-char -funsigned-bitfields -DDEBUG -DF_CPU=16000000L -DARDUINO=10808 -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR -DUSB_VID=0x2341 -DUSB_PID=0x0043 -DUSB_MANUFACTURER="\"Arduino LLC\""  -I"C:\Program Files (x86)\Atmel\Studio\7.0\Packs\Atmel\ATmega_DFP\1.4.351\include" -I"..\include\libraries\fastled-3.3.2" -I"..\include\libraries\fastled-3.3.2\lib8tion" -I"..\include\libraries\fastled-3.3.2\platforms\arm\common" -I"..\include\libraries\fastled-3.3.2\platforms\arm\d21" -I"..\include\libraries\fastled-3.3.2\platforms\arm\d51" -I"..\include\libraries\fastled-3.3.2\platforms\arm\k20" -I"..\include\libraries\fastled-3.3.2\platforms\arm\k66" -I"..\include\libraries\fastled-3.3.2\platforms\arm\kl26" -I"..\include\libraries\fastled-3.3.2\platforms\arm\mxrt1062" -I"..\include\libraries\fastled-3.3.2\platforms\arm\nrf51" -I"..\include\libraries\fastled-3.3.2\platforms\arm\nrf52" -I"..\include\libraries\fastled-3.3.2\platforms\arm\sam" -I"..\include\libraries\fastled-3.3.2\platforms\arm\stm32" -I"..\include\libraries\fastled-3.3.2\platforms\avr" -I"..\include\libraries\fastled-3.3.2\platforms\esp\32" -I"..\include\libraries\fastled-3.3.2\platforms\esp\8266" -I"..\include\core" -I"..\include\variants\standard"  -Os -fno-threadsafe-statics -ffunction-sections -fdata-sections -fpack-struct -fshort-enums -g2 -w -mmcu=atmega328p -B "C:\Program Files (x86)\Atmel\Studio\7.0\Packs\Atmel\ATmega_DFP\1.4.351\gcc\dev\atmega328p" -c -std=gnu++11 -MD -MP -MF "src/core/abi.d" -MT"src/core/abi.d" -MT"src/core/abi.o"   -o "src/core/abi.o" "../src/core/abi.cpp" 

So he has ARDUINO being defined to a proper numeric value - 10808 - and the expression will be fine!

Top Tips:

  1. How to properly post source code - see: https://www.avrfreaks.net/comment... - also how to properly include images/pictures
  2. "Garbage" characters on a serial terminal are (almost?) invariably due to wrong baud rate - see: https://learn.sparkfun.com/tutorials/serial-communication
  3. Wrong baud rate is usually due to not running at the speed you thought; check by blinking a LED to see if you get the speed you expected
  4. Difference between a crystal, and a crystal oscillatorhttps://www.avrfreaks.net/comment...
  5. When your question is resolved, mark the solution: https://www.avrfreaks.net/comment...
  6. Beginner's "Getting Started" tips: https://www.avrfreaks.net/comment...
Last Edited: Thu. Jul 2, 2020 - 09:27 AM
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0
------ Build started: Project: ArduinoCore, Configuration: Debug AVR ------
Build started.
Project "ArduinoCore.cppproj" (default targets):
Target "PreBuildEvent" skipped, due to false condition; ('$(PreBuildEvent)'!='') was evaluated as (''!='').
Target "CoreBuild" in file "C:\Program Files (x86)\Atmel\Studio\7.0\Vs\Compiler.targets" from project "d:\test\fastled_test\fastled_test\ArduinoCore\ArduinoCore.cppproj" (target "Build" depends on it):
	Using "RunCompilerTask" task from assembly "C:\Program Files (x86)\Atmel\Studio\7.0\Extensions\Application\AvrGCC.dll".
	Task "RunCompilerTask"
		Shell Utils Path C:\Program Files (x86)\Atmel\Studio\7.0\shellUtils
		C:\Program Files (x86)\Atmel\Studio\7.0\shellUtils\make.exe all --jobs 8 --output-sync 
		Building file: ../src/core/abi.cpp
		Invoking: AVR8/GNU C Compiler : 5.4.0
		"C:\Program Files (x86)\Atmel\Studio\7.0\toolchain\avr8\avr8-gnu-toolchain\bin\avr-g++.exe" -funsigned-char -funsigned-bitfields -DDEBUG -DF_CPU=16000000L -DARDUINO=10808 -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR -DUSB_VID=0x2341 -DUSB_PID=0x0043 -DUSB_MANUFACTURER="\"Arduino LLC\""  -I"C:\Program Files (x86)\Atmel\Studio\7.0\Packs\Atmel\ATmega_DFP\1.4.351\include" -I"..\include\libraries\fastled-3.3.2" -I"..\include\libraries\fastled-3.3.2\lib8tion" -I"..\include\libraries\fastled-3.3.2\platforms\arm\common" -I"..\include\libraries\fastled-3.3.2\platforms\arm\d21" -I"..\include\libraries\fastled-3.3.2\platforms\arm\d51" -I"..\include\libraries\fastled-3.3.2\platforms\arm\k20" -I"..\include\libraries\fastled-3.3.2\platforms\arm\k66" -I"..\include\libraries\fastled-3.3.2\platforms\arm\kl26" -I"..\include\libraries\fastled-3.3.2\platforms\arm\mxrt1062" -I"..\include\libraries\fastled-3.3.2\platforms\arm\nrf51" -I"..\include\libraries\fastled-3.3.2\platforms\arm\nrf52" -I"..\include\libraries\fastled-3.3.2\platforms\arm\sam" -I"..\include\libraries\fastled-3.3.2\platforms\arm\stm32" -I"..\include\libraries\fastled-3.3.2\platforms\avr" -I"..\include\libraries\fastled-3.3.2\platforms\esp\32" -I"..\include\libraries\fastled-3.3.2\platforms\esp\8266" -I"..\include\core" -I"..\include\variants\standard"  -Os -fno-threadsafe-statics -ffunction-sections -fdata-sections -fpack-struct -fshort-enums -g2 -w -mmcu=atmega328p -B "C:\Program Files (x86)\Atmel\Studio\7.0\Packs\Atmel\ATmega_DFP\1.4.351\gcc\dev\atmega328p" -c -std=gnu++11 -MD -MP -MF "src/core/abi.d" -MT"src/core/abi.d" -MT"src/core/abi.o"   -o "src/core/abi.o" "../src/core/abi.cpp" 
		Finished building: ../src/core/abi.cpp
		Building file: ../src/core/CDC.cpp
		Invoking: AVR8/GNU C Compiler : 5.4.0
		"C:\Program Files (x86)\Atmel\Studio\7.0\toolchain\avr8\avr8-gnu-toolchain\bin\avr-g++.exe" -funsigned-char -funsigned-bitfields -DDEBUG -DF_CPU=16000000L -DARDUINO=10808 -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR -DUSB_VID=0x2341 -DUSB_PID=0x0043 -DUSB_MANUFACTURER="\"Arduino LLC\""  -I"C:\Program Files (x86)\Atmel\Studio\7.0\Packs\Atmel\ATmega_DFP\1.4.351\include" -I"..\include\libraries\fastled-3.3.2" -I"..\include\libraries\fastled-3.3.2\lib8tion" -I"..\include\libraries\fastled-3.3.2\platforms\arm\common" -I"..\include\libraries\fastled-3.3.2\platforms\arm\d21" -I"..\include\libraries\fastled-3.3.2\platforms\arm\d51" -I"..\include\libraries\fastled-3.3.2\platforms\arm\k20" -I"..\include\libraries\fastled-3.3.2\platforms\arm\k66" -I"..\include\libraries\fastled-3.3.2\platforms\arm\kl26" -I"..\include\libraries\fastled-3.3.2\platforms\arm\mxrt1062" -I"..\include\libraries\fastled-3.3.2\platforms\arm\nrf51" -I"..\include\libraries\fastled-3.3.2\platforms\arm\nrf52" -I"..\include\libraries\fastled-3.3.2\platforms\arm\sam" -I"..\include\libraries\fastled-3.3.2\platforms\arm\stm32" -I"..\include\libraries\fastled-3.3.2\platforms\avr" -I"..\include\libraries\fastled-3.3.2\platforms\esp\32" -I"..\include\libraries\fastled-3.3.2\platforms\esp\8266" -I"..\include\core" -I"..\include\variants\standard"  -Os -fno-threadsafe-statics -ffunction-sections -fdata-sections -fpack-struct -fshort-enums -g2 -w -mmcu=atmega328p -B "C:\Program Files (x86)\Atmel\Studio\7.0\Packs\Atmel\ATmega_DFP\1.4.351\gcc\dev\atmega328p" -c -std=gnu++11 -MD -MP -MF "src/core/CDC.d" -MT"src/core/CDC.d" -MT"src/core/CDC.o"   -o "src/core/CDC.o" "../src/core/CDC.cpp" 
		Finished building: ../src/core/CDC.cpp
		Building file: ../src/core/HardwareSerial.cpp
		Invoking: AVR8/GNU C Compiler : 5.4.0
		"C:\Program Files (x86)\Atmel\Studio\7.0\toolchain\avr8\avr8-gnu-toolchain\bin\avr-g++.exe" -funsigned-char -funsigned-bitfields -DDEBUG -DF_CPU=16000000L -DARDUINO=10808 -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR -DUSB_VID=0x2341 -DUSB_PID=0x0043 -DUSB_MANUFACTURER="\"Arduino LLC\""  -I"C:\Program Files (x86)\Atmel\Studio\7.0\Packs\Atmel\ATmega_DFP\1.4.351\include" -I"..\include\libraries\fastled-3.3.2" -I"..\include\libraries\fastled-3.3.2\lib8tion" -I"..\include\libraries\fastled-3.3.2\platforms\arm\common" -I"..\include\libraries\fastled-3.3.2\platforms\arm\d21" -I"..\include\libraries\fastled-3.3.2\platforms\arm\d51" -I"..\include\libraries\fastled-3.3.2\platforms\arm\k20" -I"..\include\libraries\fastled-3.3.2\platforms\arm\k66" -I"..\include\libraries\fastled-3.3.2\platforms\arm\kl26" -I"..\include\libraries\fastled-3.3.2\platforms\arm\mxrt1062" -I"..\include\libraries\fastled-3.3.2\platforms\arm\nrf51" -I"..\include\libraries\fastled-3.3.2\platforms\arm\nrf52" -I"..\include\libraries\fastled-3.3.2\platforms\arm\sam" -I"..\include\libraries\fastled-3.3.2\platforms\arm\stm32" -I"..\include\libraries\fastled-3.3.2\platforms\avr" -I"..\include\libraries\fastled-3.3.2\platforms\esp\32" -I"..\include\libraries\fastled-3.3.2\platforms\esp\8266" -I"..\include\core" -I"..\include\variants\standard"  -Os -fno-threadsafe-statics -ffunction-sections -fdata-sections -fpack-struct -fshort-enums -g2 -w -mmcu=atmega328p -B "C:\Program Files (x86)\Atmel\Studio\7.0\Packs\Atmel\ATmega_DFP\1.4.351\gcc\dev\atmega328p" -c -std=gnu++11 -MD -MP -MF "src/core/HardwareSerial.d" -MT"src/core/HardwareSerial.d" -MT"src/core/HardwareSerial.o"   -o "src/core/HardwareSerial.o" "../src/core/HardwareSerial.cpp" 
		Finished building: ../src/core/HardwareSerial.cpp
		Building file: ../src/core/HardwareSerial0.cpp
		Invoking: AVR8/GNU C Compiler : 5.4.0
		"C:\Program Files (x86)\Atmel\Studio\7.0\toolchain\avr8\avr8-gnu-toolchain\bin\avr-g++.exe" -funsigned-char -funsigned-bitfields -DDEBUG -DF_CPU=16000000L -DARDUINO=10808 -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR -DUSB_VID=0x2341 -DUSB_PID=0x0043 -DUSB_MANUFACTURER="\"Arduino LLC\""  -I"C:\Program Files (x86)\Atmel\Studio\7.0\Packs\Atmel\ATmega_DFP\1.4.351\include" -I"..\include\libraries\fastled-3.3.2" -I"..\include\libraries\fastled-3.3.2\lib8tion" -I"..\include\libraries\fastled-3.3.2\platforms\arm\common" -I"..\include\libraries\fastled-3.3.2\platforms\arm\d21" -I"..\include\libraries\fastled-3.3.2\platforms\arm\d51" -I"..\include\libraries\fastled-3.3.2\platforms\arm\k20" -I"..\include\libraries\fastled-3.3.2\platforms\arm\k66" -I"..\include\libraries\fastled-3.3.2\platforms\arm\kl26" -I"..\include\libraries\fastled-3.3.2\platforms\arm\mxrt1062" -I"..\include\libraries\fastled-3.3.2\platforms\arm\nrf51" -I"..\include\libraries\fastled-3.3.2\platforms\arm\nrf52" -I"..\include\libraries\fastled-3.3.2\platforms\arm\sam" -I"..\include\libraries\fastled-3.3.2\platforms\arm\stm32" -I"..\include\libraries\fastled-3.3.2\platforms\avr" -I"..\include\libraries\fastled-3.3.2\platforms\esp\32" -I"..\include\libraries\fastled-3.3.2\platforms\esp\8266" -I"..\include\core" -I"..\include\variants\standard"  -Os -fno-threadsafe-statics -ffunction-sections -fdata-sections -fpack-struct -fshort-enums -g2 -w -mmcu=atmega328p -B "C:\Program Files (x86)\Atmel\Studio\7.0\Packs\Atmel\ATmega_DFP\1.4.351\gcc\dev\atmega328p" -c -std=gnu++11 -MD -MP -MF "src/core/HardwareSerial0.d" -MT"src/core/HardwareSerial0.d" -MT"src/core/HardwareSerial0.o"   -o "src/core/HardwareSerial0.o" "../src/core/HardwareSerial0.cpp" 
		Finished building: ../src/core/HardwareSerial0.cpp
		Building file: ../src/core/HardwareSerial1.cpp
		Invoking: AVR8/GNU C Compiler : 5.4.0
		"C:\Program Files (x86)\Atmel\Studio\7.0\toolchain\avr8\avr8-gnu-toolchain\bin\avr-g++.exe" -funsigned-char -funsigned-bitfields -DDEBUG -DF_CPU=16000000L -DARDUINO=10808 -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR -DUSB_VID=0x2341 -DUSB_PID=0x0043 -DUSB_MANUFACTURER="\"Arduino LLC\""  -I"C:\Program Files (x86)\Atmel\Studio\7.0\Packs\Atmel\ATmega_DFP\1.4.351\include" -I"..\include\libraries\fastled-3.3.2" -I"..\include\libraries\fastled-3.3.2\lib8tion" -I"..\include\libraries\fastled-3.3.2\platforms\arm\common" -I"..\include\libraries\fastled-3.3.2\platforms\arm\d21" -I"..\include\libraries\fastled-3.3.2\platforms\arm\d51" -I"..\include\libraries\fastled-3.3.2\platforms\arm\k20" -I"..\include\libraries\fastled-3.3.2\platforms\arm\k66" -I"..\include\libraries\fastled-3.3.2\platforms\arm\kl26" -I"..\include\libraries\fastled-3.3.2\platforms\arm\mxrt1062" -I"..\include\libraries\fastled-3.3.2\platforms\arm\nrf51" -I"..\include\libraries\fastled-3.3.2\platforms\arm\nrf52" -I"..\include\libraries\fastled-3.3.2\platforms\arm\sam" -I"..\include\libraries\fastled-3.3.2\platforms\arm\stm32" -I"..\include\libraries\fastled-3.3.2\platforms\avr" -I"..\include\libraries\fastled-3.3.2\platforms\esp\32" -I"..\include\libraries\fastled-3.3.2\platforms\esp\8266" -I"..\include\core" -I"..\include\variants\standard"  -Os -fno-threadsafe-statics -ffunction-sections -fdata-sections -fpack-struct -fshort-enums -g2 -w -mmcu=atmega328p -B "C:\Program Files (x86)\Atmel\Studio\7.0\Packs\Atmel\ATmega_DFP\1.4.351\gcc\dev\atmega328p" -c -std=gnu++11 -MD -MP -MF "src/core/HardwareSerial1.d" -MT"src/core/HardwareSerial1.d" -MT"src/core/HardwareSerial1.o"   -o "src/core/HardwareSerial1.o" "../src/core/HardwareSerial1.cpp" 
		Finished building: ../src/core/HardwareSerial1.cpp
		Building file: ../src/core/HardwareSerial3.cpp
		Invoking: AVR8/GNU C Compiler : 5.4.0
		"C:\Program Files (x86)\Atmel\Studio\7.0\toolchain\avr8\avr8-gnu-toolchain\bin\avr-g++.exe" -funsigned-char -funsigned-bitfields -DDEBUG -DF_CPU=16000000L -DARDUINO=10808 -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR -DUSB_VID=0x2341 -DUSB_PID=0x0043 -DUSB_MANUFACTURER="\"Arduino LLC\""  -I"C:\Program Files (x86)\Atmel\Studio\7.0\Packs\Atmel\ATmega_DFP\1.4.351\include" -I"..\include\libraries\fastled-3.3.2" -I"..\include\libraries\fastled-3.3.2\lib8tion" -I"..\include\libraries\fastled-3.3.2\platforms\arm\common" -I"..\include\libraries\fastled-3.3.2\platforms\arm\d21" -I"..\include\libraries\fastled-3.3.2\platforms\arm\d51" -I"..\include\libraries\fastled-3.3.2\platforms\arm\k20" -I"..\include\libraries\fastled-3.3.2\platforms\arm\k66" -I"..\include\libraries\fastled-3.3.2\platforms\arm\kl26" -I"..\include\libraries\fastled-3.3.2\platforms\arm\mxrt1062" -I"..\include\libraries\fastled-3.3.2\platforms\arm\nrf51" -I"..\include\libraries\fastled-3.3.2\platforms\arm\nrf52" -I"..\include\libraries\fastled-3.3.2\platforms\arm\sam" -I"..\include\libraries\fastled-3.3.2\platforms\arm\stm32" -I"..\include\libraries\fastled-3.3.2\platforms\avr" -I"..\include\libraries\fastled-3.3.2\platforms\esp\32" -I"..\include\libraries\fastled-3.3.2\platforms\esp\8266" -I"..\include\core" -I"..\include\variants\standard"  -Os -fno-threadsafe-statics -ffunction-sections -fdata-sections -fpack-struct -fshort-enums -g2 -w -mmcu=atmega328p -B "C:\Program Files (x86)\Atmel\Studio\7.0\Packs\Atmel\ATmega_DFP\1.4.351\gcc\dev\atmega328p" -c -std=gnu++11 -MD -MP -MF "src/core/HardwareSerial3.d" -MT"src/core/HardwareSerial3.d" -MT"src/core/HardwareSerial3.o"   -o "src/core/HardwareSerial3.o" "../src/core/HardwareSerial3.cpp" 
		Finished building: ../src/core/HardwareSerial3.cpp
		Building file: ../src/core/hooks.c
		Invoking: AVR8/GNU C Compiler : 5.4.0
		"C:\Program Files (x86)\Atmel\Studio\7.0\toolchain\avr8\avr8-gnu-toolchain\bin\avr-gcc.exe"  -x c -funsigned-char -funsigned-bitfields -DDEBUG -DF_CPU=16000000L -DARDUINO=10808 -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR -DUSB_VID=0x2341 -DUSB_PID=0x0043 -DUSB_MANUFACTURER="\"Arduino LLC\""  -I"C:\Program Files (x86)\Atmel\Studio\7.0\Packs\Atmel\ATmega_DFP\1.4.351\include" -I"..\include\libraries\fastled-3.3.2" -I"..\include\libraries\fastled-3.3.2\lib8tion" -I"..\include\libraries\fastled-3.3.2\platforms\arm\common" -I"..\include\libraries\fastled-3.3.2\platforms\arm\d21" -I"..\include\libraries\fastled-3.3.2\platforms\arm\d51" -I"..\include\libraries\fastled-3.3.2\platforms\arm\k20" -I"..\include\libraries\fastled-3.3.2\platforms\arm\k66" -I"..\include\libraries\fastled-3.3.2\platforms\arm\kl26" -I"..\include\libraries\fastled-3.3.2\platforms\arm\mxrt1062" -I"..\include\libraries\fastled-3.3.2\platforms\arm\nrf51" -I"..\include\libraries\fastled-3.3.2\platforms\arm\nrf52" -I"..\include\libraries\fastled-3.3.2\platforms\arm\sam" -I"..\include\libraries\fastled-3.3.2\platforms\arm\stm32" -I"..\include\libraries\fastled-3.3.2\platforms\avr" -I"..\include\libraries\fastled-3.3.2\platforms\esp\32" -I"..\include\libraries\fastled-3.3.2\platforms\esp\8266" -I"..\include\core" -I"..\include\variants\standard"  -Os -fno-threadsafe-statics -ffunction-sections -fdata-sections -fpack-struct -fshort-enums -g2 -w -mmcu=atmega328p -B "C:\Program Files (x86)\Atmel\Studio\7.0\Packs\Atmel\ATmega_DFP\1.4.351\gcc\dev\atmega328p" -c -std=gnu99 -std=gnu11 -MD -MP -MF "src/core/hooks.d" -MT"src/core/hooks.d" -MT"src/core/hooks.o"   -o "src/core/hooks.o" "../src/core/hooks.c" 
		Finished building: ../src/core/hooks.c
		Building file: ../src/core/HardwareSerial2.cpp
		Invoking: AVR8/GNU C Compiler : 5.4.0
		"C:\Program Files (x86)\Atmel\Studio\7.0\toolchain\avr8\avr8-gnu-toolchain\bin\avr-g++.exe" -funsigned-char -funsigned-bitfields -DDEBUG -DF_CPU=16000000L -DARDUINO=10808 -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR -DUSB_VID=0x2341 -DUSB_PID=0x0043 -DUSB_MANUFACTURER="\"Arduino LLC\""  -I"C:\Program Files (x86)\Atmel\Studio\7.0\Packs\Atmel\ATmega_DFP\1.4.351\include" -I"..\include\libraries\fastled-3.3.2" -I"..\include\libraries\fastled-3.3.2\lib8tion" -I"..\include\libraries\fastled-3.3.2\platforms\arm\common" -I"..\include\libraries\fastled-3.3.2\platforms\arm\d21" -I"..\include\libraries\fastled-3.3.2\platforms\arm\d51" -I"..\include\libraries\fastled-3.3.2\platforms\arm\k20" -I"..\include\libraries\fastled-3.3.2\platforms\arm\k66" -I"..\include\libraries\fastled-3.3.2\platforms\arm\kl26" -I"..\include\libraries\fastled-3.3.2\platforms\arm\mxrt1062" -I"..\include\libraries\fastled-3.3.2\platforms\arm\nrf51" -I"..\include\libraries\fastled-3.3.2\platforms\arm\nrf52" -I"..\include\libraries\fastled-3.3.2\platforms\arm\sam" -I"..\include\libraries\fastled-3.3.2\platforms\arm\stm32" -I"..\include\libraries\fastled-3.3.2\platforms\avr" -I"..\include\libraries\fastled-3.3.2\platforms\esp\32" -I"..\include\libraries\fastled-3.3.2\platforms\esp\8266" -I"..\include\core" -I"..\include\variants\standard"  -Os -fno-threadsafe-statics -ffunction-sections -fdata-sections -fpack-struct -fshort-enums -g2 -w -mmcu=atmega328p -B "C:\Program Files (x86)\Atmel\Studio\7.0\Packs\Atmel\ATmega_DFP\1.4.351\gcc\dev\atmega328p" -c -std=gnu++11 -MD -MP -MF "src/core/HardwareSerial2.d" -MT"src/core/HardwareSerial2.d" -MT"src/core/HardwareSerial2.o"   -o "src/core/HardwareSerial2.o" "../src/core/HardwareSerial2.cpp" 
		Finished building: ../src/core/HardwareSerial2.cpp
		Building file: ../src/core/IPAddress.cpp
		Invoking: AVR8/GNU C Compiler : 5.4.0
		"C:\Program Files (x86)\Atmel\Studio\7.0\toolchain\avr8\avr8-gnu-toolchain\bin\avr-g++.exe" -funsigned-char -funsigned-bitfields -DDEBUG -DF_CPU=16000000L -DARDUINO=10808 -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR -DUSB_VID=0x2341 -DUSB_PID=0x0043 -DUSB_MANUFACTURER="\"Arduino LLC\""  -I"C:\Program Files (x86)\Atmel\Studio\7.0\Packs\Atmel\ATmega_DFP\1.4.351\include" -I"..\include\libraries\fastled-3.3.2" -I"..\include\libraries\fastled-3.3.2\lib8tion" -I"..\include\libraries\fastled-3.3.2\platforms\arm\common" -I"..\include\libraries\fastled-3.3.2\platforms\arm\d21" -I"..\include\libraries\fastled-3.3.2\platforms\arm\d51" -I"..\include\libraries\fastled-3.3.2\platforms\arm\k20" -I"..\include\libraries\fastled-3.3.2\platforms\arm\k66" -I"..\include\libraries\fastled-3.3.2\platforms\arm\kl26" -I"..\include\libraries\fastled-3.3.2\platforms\arm\mxrt1062" -I"..\include\libraries\fastled-3.3.2\platforms\arm\nrf51" -I"..\include\libraries\fastled-3.3.2\platforms\arm\nrf52" -I"..\include\libraries\fastled-3.3.2\platforms\arm\sam" -I"..\include\libraries\fastled-3.3.2\platforms\arm\stm32" -I"..\include\libraries\fastled-3.3.2\platforms\avr" -I"..\include\libraries\fastled-3.3.2\platforms\esp\32" -I"..\include\libraries\fastled-3.3.2\platforms\esp\8266" -I"..\include\core" -I"..\include\variants\standard"  -Os -fno-threadsafe-statics -ffunction-sections -fdata-sections -fpack-struct -fshort-enums -g2 -w -mmcu=atmega328p -B "C:\Program Files (x86)\Atmel\Studio\7.0\Packs\Atmel\ATmega_DFP\1.4.351\gcc\dev\atmega328p" -c -std=gnu++11 -MD -MP -MF "src/core/IPAddress.d" -MT"src/core/IPAddress.d" -MT"src/core/IPAddress.o"   -o "src/core/IPAddress.o" "../src/core/IPAddress.cpp" 
		Finished building: ../src/core/IPAddress.cpp
		Building file: ../src/core/PreprocessingAssembly/wiring_pulse.S
		Invoking: AVR8/GNU Assembler : 5.4.0
		"C:\Program Files (x86)\Atmel\Studio\7.0\toolchain\avr8\avr8-gnu-toolchain\bin\avr-g++.exe" -Wa,-gdwarf2 -x assembler-with-cpp -c -mmcu=atmega328p -B "C:\Program Files (x86)\Atmel\Studio\7.0\Packs\Atmel\ATmega_DFP\1.4.351\gcc\dev\atmega328p" -I "C:\Program Files (x86)\Atmel\Studio\7.0\Packs\Atmel\ATmega_DFP\1.4.351\include"  -MD -MP -MF "src/core/PreprocessingAssembly/wiring_pulse.d" -MT"src/core/PreprocessingAssembly/wiring_pulse.d" -MT"src/core/PreprocessingAssembly/wiring_pulse.o" -Wa,-g   -o "src/core/PreprocessingAssembly/wiring_pulse.o" "../src/core/PreprocessingAssembly/wiring_pulse.S" 
		Finished building: ../src/core/PreprocessingAssembly/wiring_pulse.S
		Building file: ../src/core/main.cpp
		Invoking: AVR8/GNU C Compiler : 5.4.0
		"C:\Program Files (x86)\Atmel\Studio\7.0\toolchain\avr8\avr8-gnu-toolchain\bin\avr-g++.exe" -funsigned-char -funsigned-bitfields -DDEBUG -DF_CPU=16000000L -DARDUINO=10808 -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR -DUSB_VID=0x2341 -DUSB_PID=0x0043 -DUSB_MANUFACTURER="\"Arduino LLC\""  -I"C:\Program Files (x86)\Atmel\Studio\7.0\Packs\Atmel\ATmega_DFP\1.4.351\include" -I"..\include\libraries\fastled-3.3.2" -I"..\include\libraries\fastled-3.3.2\lib8tion" -I"..\include\libraries\fastled-3.3.2\platforms\arm\common" -I"..\include\libraries\fastled-3.3.2\platforms\arm\d21" -I"..\include\libraries\fastled-3.3.2\platforms\arm\d51" -I"..\include\libraries\fastled-3.3.2\platforms\arm\k20" -I"..\include\libraries\fastled-3.3.2\platforms\arm\k66" -I"..\include\libraries\fastled-3.3.2\platforms\arm\kl26" -I"..\include\libraries\fastled-3.3.2\platforms\arm\mxrt1062" -I"..\include\libraries\fastled-3.3.2\platforms\arm\nrf51" -I"..\include\libraries\fastled-3.3.2\platforms\arm\nrf52" -I"..\include\libraries\fastled-3.3.2\platforms\arm\sam" -I"..\include\libraries\fastled-3.3.2\platforms\arm\stm32" -I"..\include\libraries\fastled-3.3.2\platforms\avr" -I"..\include\libraries\fastled-3.3.2\platforms\esp\32" -I"..\include\libraries\fastled-3.3.2\platforms\esp\8266" -I"..\include\core" -I"..\include\variants\standard"  -Os -fno-threadsafe-statics -ffunction-sections -fdata-sections -fpack-struct -fshort-enums -g2 -w -mmcu=atmega328p -B "C:\Program Files (x86)\Atmel\Studio\7.0\Packs\Atmel\ATmega_DFP\1.4.351\gcc\dev\atmega328p" -c -std=gnu++11 -MD -MP -MF "src/core/main.d" -MT"src/core/main.d" -MT"src/core/main.o"   -o "src/core/main.o" "../src/core/main.cpp" 
		Finished building: ../src/core/main.cpp
		Building file: ../src/core/new.cpp
		Invoking: AVR8/GNU C Compiler : 5.4.0
		"C:\Program Files (x86)\Atmel\Studio\7.0\toolchain\avr8\avr8-gnu-toolchain\bin\avr-g++.exe" -funsigned-char -funsigned-bitfields -DDEBUG -DF_CPU=16000000L -DARDUINO=10808 -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR -DUSB_VID=0x2341 -DUSB_PID=0x0043 -DUSB_MANUFACTURER="\"Arduino LLC\""  -I"C:\Program Files (x86)\Atmel\Studio\7.0\Packs\Atmel\ATmega_DFP\1.4.351\include" -I"..\include\libraries\fastled-3.3.2" -I"..\include\libraries\fastled-3.3.2\lib8tion" -I"..\include\libraries\fastled-3.3.2\platforms\arm\common" -I"..\include\libraries\fastled-3.3.2\platforms\arm\d21" -I"..\include\libraries\fastled-3.3.2\platforms\arm\d51" -I"..\include\libraries\fastled-3.3.2\platforms\arm\k20" -I"..\include\libraries\fastled-3.3.2\platforms\arm\k66" -I"..\include\libraries\fastled-3.3.2\platforms\arm\kl26" -I"..\include\libraries\fastled-3.3.2\platforms\arm\mxrt1062" -I"..\include\libraries\fastled-3.3.2\platforms\arm\nrf51" -I"..\include\libraries\fastled-3.3.2\platforms\arm\nrf52" -I"..\include\libraries\fastled-3.3.2\platforms\arm\sam" -I"..\include\libraries\fastled-3.3.2\platforms\arm\stm32" -I"..\include\libraries\fastled-3.3.2\platforms\avr" -I"..\include\libraries\fastled-3.3.2\platforms\esp\32" -I"..\include\libraries\fastled-3.3.2\platforms\esp\8266" -I"..\include\core" -I"..\include\variants\standard"  -Os -fno-threadsafe-statics -ffunction-sections -fdata-sections -fpack-struct -fshort-enums -g2 -w -mmcu=atmega328p -B "C:\Program Files (x86)\Atmel\Studio\7.0\Packs\Atmel\ATmega_DFP\1.4.351\gcc\dev\atmega328p" -c -std=gnu++11 -MD -MP -MF "src/core/new.d" -MT"src/core/new.d" -MT"src/core/new.o"   -o "src/core/new.o" "../src/core/new.cpp" 
		Finished building: ../src/core/new.cpp
		Building file: ../src/core/PluggableUSB.cpp
		Invoking: AVR8/GNU C Compiler : 5.4.0
		"C:\Program Files (x86)\Atmel\Studio\7.0\toolchain\avr8\avr8-gnu-toolchain\bin\avr-g++.exe" -funsigned-char -funsigned-bitfields -DDEBUG -DF_CPU=16000000L -DARDUINO=10808 -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR -DUSB_VID=0x2341 -DUSB_PID=0x0043 -DUSB_MANUFACTURER="\"Arduino LLC\""  -I"C:\Program Files (x86)\Atmel\Studio\7.0\Packs\Atmel\ATmega_DFP\1.4.351\include" -I"..\include\libraries\fastled-3.3.2" -I"..\include\libraries\fastled-3.3.2\lib8tion" -I"..\include\libraries\fastled-3.3.2\platforms\arm\common" -I"..\include\libraries\fastled-3.3.2\platforms\arm\d21" -I"..\include\libraries\fastled-3.3.2\platforms\arm\d51" -I"..\include\libraries\fastled-3.3.2\platforms\arm\k20" -I"..\include\libraries\fastled-3.3.2\platforms\arm\k66" -I"..\include\libraries\fastled-3.3.2\platforms\arm\kl26" -I"..\include\libraries\fastled-3.3.2\platforms\arm\mxrt1062" -I"..\include\libraries\fastled-3.3.2\platforms\arm\nrf51" -I"..\include\libraries\fastled-3.3.2\platforms\arm\nrf52" -I"..\include\libraries\fastled-3.3.2\platforms\arm\sam" -I"..\include\libraries\fastled-3.3.2\platforms\arm\stm32" -I"..\include\libraries\fastled-3.3.2\platforms\avr" -I"..\include\libraries\fastled-3.3.2\platforms\esp\32" -I"..\include\libraries\fastled-3.3.2\platforms\esp\8266" -I"..\include\core" -I"..\include\variants\standard"  -Os -fno-threadsafe-statics -ffunction-sections -fdata-sections -fpack-struct -fshort-enums -g2 -w -mmcu=atmega328p -B "C:\Program Files (x86)\Atmel\Studio\7.0\Packs\Atmel\ATmega_DFP\1.4.351\gcc\dev\atmega328p" -c -std=gnu++11 -MD -MP -MF "src/core/PluggableUSB.d" -MT"src/core/PluggableUSB.d" -MT"src/core/PluggableUSB.o"   -o "src/core/PluggableUSB.o" "../src/core/PluggableUSB.cpp" 
		Finished building: ../src/core/PluggableUSB.cpp
		Building file: ../src/core/Tone.cpp
		Invoking: AVR8/GNU C Compiler : 5.4.0
		"C:\Program Files (x86)\Atmel\Studio\7.0\toolchain\avr8\avr8-gnu-toolchain\bin\avr-g++.exe" -funsigned-char -funsigned-bitfields -DDEBUG -DF_CPU=16000000L -DARDUINO=10808 -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR -DUSB_VID=0x2341 -DUSB_PID=0x0043 -DUSB_MANUFACTURER="\"Arduino LLC\""  -I"C:\Program Files (x86)\Atmel\Studio\7.0\Packs\Atmel\ATmega_DFP\1.4.351\include" -I"..\include\libraries\fastled-3.3.2" -I"..\include\libraries\fastled-3.3.2\lib8tion" -I"..\include\libraries\fastled-3.3.2\platforms\arm\common" -I"..\include\libraries\fastled-3.3.2\platforms\arm\d21" -I"..\include\libraries\fastled-3.3.2\platforms\arm\d51" -I"..\include\libraries\fastled-3.3.2\platforms\arm\k20" -I"..\include\libraries\fastled-3.3.2\platforms\arm\k66" -I"..\include\libraries\fastled-3.3.2\platforms\arm\kl26" -I"..\include\libraries\fastled-3.3.2\platforms\arm\mxrt1062" -I"..\include\libraries\fastled-3.3.2\platforms\arm\nrf51" -I"..\include\libraries\fastled-3.3.2\platforms\arm\nrf52" -I"..\include\libraries\fastled-3.3.2\platforms\arm\sam" -I"..\include\libraries\fastled-3.3.2\platforms\arm\stm32" -I"..\include\libraries\fastled-3.3.2\platforms\avr" -I"..\include\libraries\fastled-3.3.2\platforms\esp\32" -I"..\include\libraries\fastled-3.3.2\platforms\esp\8266" -I"..\include\core" -I"..\include\variants\standard"  -Os -fno-threadsafe-statics -ffunction-sections -fdata-sections -fpack-struct -fshort-enums -g2 -w -mmcu=atmega328p -B "C:\Program Files (x86)\Atmel\Studio\7.0\Packs\Atmel\ATmega_DFP\1.4.351\gcc\dev\atmega328p" -c -std=gnu++11 -MD -MP -MF "src/core/Tone.d" -MT"src/core/Tone.d" -MT"src/core/Tone.o"   -o "src/core/Tone.o" "../src/core/Tone.cpp" 
		Finished building: ../src/core/Tone.cpp
		Building file: ../src/core/Stream.cpp
		Invoking: AVR8/GNU C Compiler : 5.4.0
		"C:\Program Files (x86)\Atmel\Studio\7.0\toolchain\avr8\avr8-gnu-toolchain\bin\avr-g++.exe" -funsigned-char -funsigned-bitfields -DDEBUG -DF_CPU=16000000L -DARDUINO=10808 -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR -DUSB_VID=0x2341 -DUSB_PID=0x0043 -DUSB_MANUFACTURER="\"Arduino LLC\""  -I"C:\Program Files (x86)\Atmel\Studio\7.0\Packs\Atmel\ATmega_DFP\1.4.351\include" -I"..\include\libraries\fastled-3.3.2" -I"..\include\libraries\fastled-3.3.2\lib8tion" -I"..\include\libraries\fastled-3.3.2\platforms\arm\common" -I"..\include\libraries\fastled-3.3.2\platforms\arm\d21" -I"..\include\libraries\fastled-3.3.2\platforms\arm\d51" -I"..\include\libraries\fastled-3.3.2\platforms\arm\k20" -I"..\include\libraries\fastled-3.3.2\platforms\arm\k66" -I"..\include\libraries\fastled-3.3.2\platforms\arm\kl26" -I"..\include\libraries\fastled-3.3.2\platforms\arm\mxrt1062" -I"..\include\libraries\fastled-3.3.2\platforms\arm\nrf51" -I"..\include\libraries\fastled-3.3.2\platforms\arm\nrf52" -I"..\include\libraries\fastled-3.3.2\platforms\arm\sam" -I"..\include\libraries\fastled-3.3.2\platforms\arm\stm32" -I"..\include\libraries\fastled-3.3.2\platforms\avr" -I"..\include\libraries\fastled-3.3.2\platforms\esp\32" -I"..\include\libraries\fastled-3.3.2\platforms\esp\8266" -I"..\include\core" -I"..\include\variants\standard"  -Os -fno-threadsafe-statics -ffunction-sections -fdata-sections -fpack-struct -fshort-enums -g2 -w -mmcu=atmega328p -B "C:\Program Files (x86)\Atmel\Studio\7.0\Packs\Atmel\ATmega_DFP\1.4.351\gcc\dev\atmega328p" -c -std=gnu++11 -MD -MP -MF "src/core/Stream.d" -MT"src/core/Stream.d" -MT"src/core/Stream.o"   -o "src/core/Stream.o" "../src/core/Stream.cpp" 
		Finished building: ../src/core/Stream.cpp
		Building file: ../src/core/Print.cpp
		Invoking: AVR8/GNU C Compiler : 5.4.0
		"C:\Program Files (x86)\Atmel\Studio\7.0\toolchain\avr8\avr8-gnu-toolchain\bin\avr-g++.exe" -funsigned-char -funsigned-bitfields -DDEBUG -DF_CPU=16000000L -DARDUINO=10808 -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR -DUSB_VID=0x2341 -DUSB_PID=0x0043 -DUSB_MANUFACTURER="\"Arduino LLC\""  -I"C:\Program Files (x86)\Atmel\Studio\7.0\Packs\Atmel\ATmega_DFP\1.4.351\include" -I"..\include\libraries\fastled-3.3.2" -I"..\include\libraries\fastled-3.3.2\lib8tion" -I"..\include\libraries\fastled-3.3.2\platforms\arm\common" -I"..\include\libraries\fastled-3.3.2\platforms\arm\d21" -I"..\include\libraries\fastled-3.3.2\platforms\arm\d51" -I"..\include\libraries\fastled-3.3.2\platforms\arm\k20" -I"..\include\libraries\fastled-3.3.2\platforms\arm\k66" -I"..\include\libraries\fastled-3.3.2\platforms\arm\kl26" -I"..\include\libraries\fastled-3.3.2\platforms\arm\mxrt1062" -I"..\include\libraries\fastled-3.3.2\platforms\arm\nrf51" -I"..\include\libraries\fastled-3.3.2\platforms\arm\nrf52" -I"..\include\libraries\fastled-3.3.2\platforms\arm\sam" -I"..\include\libraries\fastled-3.3.2\platforms\arm\stm32" -I"..\include\libraries\fastled-3.3.2\platforms\avr" -I"..\include\libraries\fastled-3.3.2\platforms\esp\32" -I"..\include\libraries\fastled-3.3.2\platforms\esp\8266" -I"..\include\core" -I"..\include\variants\standard"  -Os -fno-threadsafe-statics -ffunction-sections -fdata-sections -fpack-struct -fshort-enums -g2 -w -mmcu=atmega328p -B "C:\Program Files (x86)\Atmel\Studio\7.0\Packs\Atmel\ATmega_DFP\1.4.351\gcc\dev\atmega328p" -c -std=gnu++11 -MD -MP -MF "src/core/Print.d" -MT"src/core/Print.d" -MT"src/core/Print.o"   -o "src/core/Print.o" "../src/core/Print.cpp" 
		Finished building: ../src/core/Print.cpp
		Building file: ../src/core/wiring.c
		Invoking: AVR8/GNU C Compiler : 5.4.0
		"C:\Program Files (x86)\Atmel\Studio\7.0\toolchain\avr8\avr8-gnu-toolchain\bin\avr-gcc.exe"  -x c -funsigned-char -funsigned-bitfields -DDEBUG -DF_CPU=16000000L -DARDUINO=10808 -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR -DUSB_VID=0x2341 -DUSB_PID=0x0043 -DUSB_MANUFACTURER="\"Arduino LLC\""  -I"C:\Program Files (x86)\Atmel\Studio\7.0\Packs\Atmel\ATmega_DFP\1.4.351\include" -I"..\include\libraries\fastled-3.3.2" -I"..\include\libraries\fastled-3.3.2\lib8tion" -I"..\include\libraries\fastled-3.3.2\platforms\arm\common" -I"..\include\libraries\fastled-3.3.2\platforms\arm\d21" -I"..\include\libraries\fastled-3.3.2\platforms\arm\d51" -I"..\include\libraries\fastled-3.3.2\platforms\arm\k20" -I"..\include\libraries\fastled-3.3.2\platforms\arm\k66" -I"..\include\libraries\fastled-3.3.2\platforms\arm\kl26" -I"..\include\libraries\fastled-3.3.2\platforms\arm\mxrt1062" -I"..\include\libraries\fastled-3.3.2\platforms\arm\nrf51" -I"..\include\libraries\fastled-3.3.2\platforms\arm\nrf52" -I"..\include\libraries\fastled-3.3.2\platforms\arm\sam" -I"..\include\libraries\fastled-3.3.2\platforms\arm\stm32" -I"..\include\libraries\fastled-3.3.2\platforms\avr" -I"..\include\libraries\fastled-3.3.2\platforms\esp\32" -I"..\include\libraries\fastled-3.3.2\platforms\esp\8266" -I"..\include\core" -I"..\include\variants\standard"  -Os -fno-threadsafe-statics -ffunction-sections -fdata-sections -fpack-struct -fshort-enums -g2 -w -mmcu=atmega328p -B "C:\Program Files (x86)\Atmel\Studio\7.0\Packs\Atmel\ATmega_DFP\1.4.351\gcc\dev\atmega328p" -c -std=gnu99 -std=gnu11 -MD -MP -MF "src/core/wiring.d" -MT"src/core/wiring.d" -MT"src/core/wiring.o"   -o "src/core/wiring.o" "../src/core/wiring.c" 
		Finished building: ../src/core/wiring.c
		Building file: ../src/core/USBCore.cpp
		Invoking: AVR8/GNU C Compiler : 5.4.0
		"C:\Program Files (x86)\Atmel\Studio\7.0\toolchain\avr8\avr8-gnu-toolchain\bin\avr-g++.exe" -funsigned-char -funsigned-bitfields -DDEBUG -DF_CPU=16000000L -DARDUINO=10808 -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR -DUSB_VID=0x2341 -DUSB_PID=0x0043 -DUSB_MANUFACTURER="\"Arduino LLC\""  -I"C:\Program Files (x86)\Atmel\Studio\7.0\Packs\Atmel\ATmega_DFP\1.4.351\include" -I"..\include\libraries\fastled-3.3.2" -I"..\include\libraries\fastled-3.3.2\lib8tion" -I"..\include\libraries\fastled-3.3.2\platforms\arm\common" -I"..\include\libraries\fastled-3.3.2\platforms\arm\d21" -I"..\include\libraries\fastled-3.3.2\platforms\arm\d51" -I"..\include\libraries\fastled-3.3.2\platforms\arm\k20" -I"..\include\libraries\fastled-3.3.2\platforms\arm\k66" -I"..\include\libraries\fastled-3.3.2\platforms\arm\kl26" -I"..\include\libraries\fastled-3.3.2\platforms\arm\mxrt1062" -I"..\include\libraries\fastled-3.3.2\platforms\arm\nrf51" -I"..\include\libraries\fastled-3.3.2\platforms\arm\nrf52" -I"..\include\libraries\fastled-3.3.2\platforms\arm\sam" -I"..\include\libraries\fastled-3.3.2\platforms\arm\stm32" -I"..\include\libraries\fastled-3.3.2\platforms\avr" -I"..\include\libraries\fastled-3.3.2\platforms\esp\32" -I"..\include\libraries\fastled-3.3.2\platforms\esp\8266" -I"..\include\core" -I"..\include\variants\standard"  -Os -fno-threadsafe-statics -ffunction-sections -fdata-sections -fpack-struct -fshort-enums -g2 -w -mmcu=atmega328p -B "C:\Program Files (x86)\Atmel\Studio\7.0\Packs\Atmel\ATmega_DFP\1.4.351\gcc\dev\atmega328p" -c -std=gnu++11 -MD -MP -MF "src/core/USBCore.d" -MT"src/core/USBCore.d" -MT"src/core/USBCore.o"   -o "src/core/USBCore.o" "../src/core/USBCore.cpp" 
		Finished building: ../src/core/USBCore.cpp
		Building file: ../src/core/wiring_analog.c
		Invoking: AVR8/GNU C Compiler : 5.4.0
		"C:\Program Files (x86)\Atmel\Studio\7.0\toolchain\avr8\avr8-gnu-toolchain\bin\avr-gcc.exe"  -x c -funsigned-char -funsigned-bitfields -DDEBUG -DF_CPU=16000000L -DARDUINO=10808 -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR -DUSB_VID=0x2341 -DUSB_PID=0x0043 -DUSB_MANUFACTURER="\"Arduino LLC\""  -I"C:\Program Files (x86)\Atmel\Studio\7.0\Packs\Atmel\ATmega_DFP\1.4.351\include" -I"..\include\libraries\fastled-3.3.2" -I"..\include\libraries\fastled-3.3.2\lib8tion" -I"..\include\libraries\fastled-3.3.2\platforms\arm\common" -I"..\include\libraries\fastled-3.3.2\platforms\arm\d21" -I"..\include\libraries\fastled-3.3.2\platforms\arm\d51" -I"..\include\libraries\fastled-3.3.2\platforms\arm\k20" -I"..\include\libraries\fastled-3.3.2\platforms\arm\k66" -I"..\include\libraries\fastled-3.3.2\platforms\arm\kl26" -I"..\include\libraries\fastled-3.3.2\platforms\arm\mxrt1062" -I"..\include\libraries\fastled-3.3.2\platforms\arm\nrf51" -I"..\include\libraries\fastled-3.3.2\platforms\arm\nrf52" -I"..\include\libraries\fastled-3.3.2\platforms\arm\sam" -I"..\include\libraries\fastled-3.3.2\platforms\arm\stm32" -I"..\include\libraries\fastled-3.3.2\platforms\avr" -I"..\include\libraries\fastled-3.3.2\platforms\esp\32" -I"..\include\libraries\fastled-3.3.2\platforms\esp\8266" -I"..\include\core" -I"..\include\variants\standard"  -Os -fno-threadsafe-statics -ffunction-sections -fdata-sections -fpack-struct -fshort-enums -g2 -w -mmcu=atmega328p -B "C:\Program Files (x86)\Atmel\Studio\7.0\Packs\Atmel\ATmega_DFP\1.4.351\gcc\dev\atmega328p" -c -std=gnu99 -std=gnu11 -MD -MP -MF "src/core/wiring_analog.d" -MT"src/core/wiring_analog.d" -MT"src/core/wiring_analog.o"   -o "src/core/wiring_analog.o" "../src/core/wiring_analog.c" 
		Finished building: ../src/core/wiring_analog.c
		Building file: ../src/core/wiring_pulse.c
		Invoking: AVR8/GNU C Compiler : 5.4.0
		"C:\Program Files (x86)\Atmel\Studio\7.0\toolchain\avr8\avr8-gnu-toolchain\bin\avr-gcc.exe"  -x c -funsigned-char -funsigned-bitfields -DDEBUG -DF_CPU=16000000L -DARDUINO=10808 -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR -DUSB_VID=0x2341 -DUSB_PID=0x0043 -DUSB_MANUFACTURER="\"Arduino LLC\""  -I"C:\Program Files (x86)\Atmel\Studio\7.0\Packs\Atmel\ATmega_DFP\1.4.351\include" -I"..\include\libraries\fastled-3.3.2" -I"..\include\libraries\fastled-3.3.2\lib8tion" -I"..\include\libraries\fastled-3.3.2\platforms\arm\common" -I"..\include\libraries\fastled-3.3.2\platforms\arm\d21" -I"..\include\libraries\fastled-3.3.2\platforms\arm\d51" -I"..\include\libraries\fastled-3.3.2\platforms\arm\k20" -I"..\include\libraries\fastled-3.3.2\platforms\arm\k66" -I"..\include\libraries\fastled-3.3.2\platforms\arm\kl26" -I"..\include\libraries\fastled-3.3.2\platforms\arm\mxrt1062" -I"..\include\libraries\fastled-3.3.2\platforms\arm\nrf51" -I"..\include\libraries\fastled-3.3.2\platforms\arm\nrf52" -I"..\include\libraries\fastled-3.3.2\platforms\arm\sam" -I"..\include\libraries\fastled-3.3.2\platforms\arm\stm32" -I"..\include\libraries\fastled-3.3.2\platforms\avr" -I"..\include\libraries\fastled-3.3.2\platforms\esp\32" -I"..\include\libraries\fastled-3.3.2\platforms\esp\8266" -I"..\include\core" -I"..\include\variants\standard"  -Os -fno-threadsafe-statics -ffunction-sections -fdata-sections -fpack-struct -fshort-enums -g2 -w -mmcu=atmega328p -B "C:\Program Files (x86)\Atmel\Studio\7.0\Packs\Atmel\ATmega_DFP\1.4.351\gcc\dev\atmega328p" -c -std=gnu99 -std=gnu11 -MD -MP -MF "src/core/wiring_pulse.d" -MT"src/core/wiring_pulse.d" -MT"src/core/wiring_pulse.o"   -o "src/core/wiring_pulse.o" "../src/core/wiring_pulse.c" 
		Finished building: ../src/core/wiring_pulse.c
		Building file: ../src/core/WInterrupts.c
		Invoking: AVR8/GNU C Compiler : 5.4.0
		"C:\Program Files (x86)\Atmel\Studio\7.0\toolchain\avr8\avr8-gnu-toolchain\bin\avr-gcc.exe"  -x c -funsigned-char -funsigned-bitfields -DDEBUG -DF_CPU=16000000L -DARDUINO=10808 -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR -DUSB_VID=0x2341 -DUSB_PID=0x0043 -DUSB_MANUFACTURER="\"Arduino LLC\""  -I"C:\Program Files (x86)\Atmel\Studio\7.0\Packs\Atmel\ATmega_DFP\1.4.351\include" -I"..\include\libraries\fastled-3.3.2" -I"..\include\libraries\fastled-3.3.2\lib8tion" -I"..\include\libraries\fastled-3.3.2\platforms\arm\common" -I"..\include\libraries\fastled-3.3.2\platforms\arm\d21" -I"..\include\libraries\fastled-3.3.2\platforms\arm\d51" -I"..\include\libraries\fastled-3.3.2\platforms\arm\k20" -I"..\include\libraries\fastled-3.3.2\platforms\arm\k66" -I"..\include\libraries\fastled-3.3.2\platforms\arm\kl26" -I"..\include\libraries\fastled-3.3.2\platforms\arm\mxrt1062" -I"..\include\libraries\fastled-3.3.2\platforms\arm\nrf51" -I"..\include\libraries\fastled-3.3.2\platforms\arm\nrf52" -I"..\include\libraries\fastled-3.3.2\platforms\arm\sam" -I"..\include\libraries\fastled-3.3.2\platforms\arm\stm32" -I"..\include\libraries\fastled-3.3.2\platforms\avr" -I"..\include\libraries\fastled-3.3.2\platforms\esp\32" -I"..\include\libraries\fastled-3.3.2\platforms\esp\8266" -I"..\include\core" -I"..\include\variants\standard"  -Os -fno-threadsafe-statics -ffunction-sections -fdata-sections -fpack-struct -fshort-enums -g2 -w -mmcu=atmega328p -B "C:\Program Files (x86)\Atmel\Studio\7.0\Packs\Atmel\ATmega_DFP\1.4.351\gcc\dev\atmega328p" -c -std=gnu99 -std=gnu11 -MD -MP -MF "src/core/WInterrupts.d" -MT"src/core/WInterrupts.d" -MT"src/core/WInterrupts.o"   -o "src/core/WInterrupts.o" "../src/core/WInterrupts.c" 
		Finished building: ../src/core/WInterrupts.c
		Building file: ../src/core/wiring_digital.c
		Invoking: AVR8/GNU C Compiler : 5.4.0
		"C:\Program Files (x86)\Atmel\Studio\7.0\toolchain\avr8\avr8-gnu-toolchain\bin\avr-gcc.exe"  -x c -funsigned-char -funsigned-bitfields -DDEBUG -DF_CPU=16000000L -DARDUINO=10808 -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR -DUSB_VID=0x2341 -DUSB_PID=0x0043 -DUSB_MANUFACTURER="\"Arduino LLC\""  -I"C:\Program Files (x86)\Atmel\Studio\7.0\Packs\Atmel\ATmega_DFP\1.4.351\include" -I"..\include\libraries\fastled-3.3.2" -I"..\include\libraries\fastled-3.3.2\lib8tion" -I"..\include\libraries\fastled-3.3.2\platforms\arm\common" -I"..\include\libraries\fastled-3.3.2\platforms\arm\d21" -I"..\include\libraries\fastled-3.3.2\platforms\arm\d51" -I"..\include\libraries\fastled-3.3.2\platforms\arm\k20" -I"..\include\libraries\fastled-3.3.2\platforms\arm\k66" -I"..\include\libraries\fastled-3.3.2\platforms\arm\kl26" -I"..\include\libraries\fastled-3.3.2\platforms\arm\mxrt1062" -I"..\include\libraries\fastled-3.3.2\platforms\arm\nrf51" -I"..\include\libraries\fastled-3.3.2\platforms\arm\nrf52" -I"..\include\libraries\fastled-3.3.2\platforms\arm\sam" -I"..\include\libraries\fastled-3.3.2\platforms\arm\stm32" -I"..\include\libraries\fastled-3.3.2\platforms\avr" -I"..\include\libraries\fastled-3.3.2\platforms\esp\32" -I"..\include\libraries\fastled-3.3.2\platforms\esp\8266" -I"..\include\core" -I"..\include\variants\standard"  -Os -fno-threadsafe-statics -ffunction-sections -fdata-sections -fpack-struct -fshort-enums -g2 -w -mmcu=atmega328p -B "C:\Program Files (x86)\Atmel\Studio\7.0\Packs\Atmel\ATmega_DFP\1.4.351\gcc\dev\atmega328p" -c -std=gnu99 -std=gnu11 -MD -MP -MF "src/core/wiring_digital.d" -MT"src/core/wiring_digital.d" -MT"src/core/wiring_digital.o"   -o "src/core/wiring_digital.o" "../src/core/wiring_digital.c" 
		Finished building: ../src/core/wiring_digital.c
		Building file: ../src/core/wiring_shift.c
		Invoking: AVR8/GNU C Compiler : 5.4.0
		"C:\Program Files (x86)\Atmel\Studio\7.0\toolchain\avr8\avr8-gnu-toolchain\bin\avr-gcc.exe"  -x c -funsigned-char -funsigned-bitfields -DDEBUG -DF_CPU=16000000L -DARDUINO=10808 -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR -DUSB_VID=0x2341 -DUSB_PID=0x0043 -DUSB_MANUFACTURER="\"Arduino LLC\""  -I"C:\Program Files (x86)\Atmel\Studio\7.0\Packs\Atmel\ATmega_DFP\1.4.351\include" -I"..\include\libraries\fastled-3.3.2" -I"..\include\libraries\fastled-3.3.2\lib8tion" -I"..\include\libraries\fastled-3.3.2\platforms\arm\common" -I"..\include\libraries\fastled-3.3.2\platforms\arm\d21" -I"..\include\libraries\fastled-3.3.2\platforms\arm\d51" -I"..\include\libraries\fastled-3.3.2\platforms\arm\k20" -I"..\include\libraries\fastled-3.3.2\platforms\arm\k66" -I"..\include\libraries\fastled-3.3.2\platforms\arm\kl26" -I"..\include\libraries\fastled-3.3.2\platforms\arm\mxrt1062" -I"..\include\libraries\fastled-3.3.2\platforms\arm\nrf51" -I"..\include\libraries\fastled-3.3.2\platforms\arm\nrf52" -I"..\include\libraries\fastled-3.3.2\platforms\arm\sam" -I"..\include\libraries\fastled-3.3.2\platforms\arm\stm32" -I"..\include\libraries\fastled-3.3.2\platforms\avr" -I"..\include\libraries\fastled-3.3.2\platforms\esp\32" -I"..\include\libraries\fastled-3.3.2\platforms\esp\8266" -I"..\include\core" -I"..\include\variants\standard"  -Os -fno-threadsafe-statics -ffunction-sections -fdata-sections -fpack-struct -fshort-enums -g2 -w -mmcu=atmega328p -B "C:\Program Files (x86)\Atmel\Studio\7.0\Packs\Atmel\ATmega_DFP\1.4.351\gcc\dev\atmega328p" -c -std=gnu99 -std=gnu11 -MD -MP -MF "src/core/wiring_shift.d" -MT"src/core/wiring_shift.d" -MT"src/core/wiring_shift.o"   -o "src/core/wiring_shift.o" "../src/core/wiring_shift.c" 
		Finished building: ../src/core/wiring_shift.c
		Building file: ../src/core/WMath.cpp
		Invoking: AVR8/GNU C Compiler : 5.4.0
		"C:\Program Files (x86)\Atmel\Studio\7.0\toolchain\avr8\avr8-gnu-toolchain\bin\avr-g++.exe" -funsigned-char -funsigned-bitfields -DDEBUG -DF_CPU=16000000L -DARDUINO=10808 -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR -DUSB_VID=0x2341 -DUSB_PID=0x0043 -DUSB_MANUFACTURER="\"Arduino LLC\""  -I"C:\Program Files (x86)\Atmel\Studio\7.0\Packs\Atmel\ATmega_DFP\1.4.351\include" -I"..\include\libraries\fastled-3.3.2" -I"..\include\libraries\fastled-3.3.2\lib8tion" -I"..\include\libraries\fastled-3.3.2\platforms\arm\common" -I"..\include\libraries\fastled-3.3.2\platforms\arm\d21" -I"..\include\libraries\fastled-3.3.2\platforms\arm\d51" -I"..\include\libraries\fastled-3.3.2\platforms\arm\k20" -I"..\include\libraries\fastled-3.3.2\platforms\arm\k66" -I"..\include\libraries\fastled-3.3.2\platforms\arm\kl26" -I"..\include\libraries\fastled-3.3.2\platforms\arm\mxrt1062" -I"..\include\libraries\fastled-3.3.2\platforms\arm\nrf51" -I"..\include\libraries\fastled-3.3.2\platforms\arm\nrf52" -I"..\include\libraries\fastled-3.3.2\platforms\arm\sam" -I"..\include\libraries\fastled-3.3.2\platforms\arm\stm32" -I"..\include\libraries\fastled-3.3.2\platforms\avr" -I"..\include\libraries\fastled-3.3.2\platforms\esp\32" -I"..\include\libraries\fastled-3.3.2\platforms\esp\8266" -I"..\include\core" -I"..\include\variants\standard"  -Os -fno-threadsafe-statics -ffunction-sections -fdata-sections -fpack-struct -fshort-enums -g2 -w -mmcu=atmega328p -B "C:\Program Files (x86)\Atmel\Studio\7.0\Packs\Atmel\ATmega_DFP\1.4.351\gcc\dev\atmega328p" -c -std=gnu++11 -MD -MP -MF "src/core/WMath.d" -MT"src/core/WMath.d" -MT"src/core/WMath.o"   -o "src/core/WMath.o" "../src/core/WMath.cpp" 
		Finished building: ../src/core/WMath.cpp
		Building file: ../src/core/WString.cpp
		Invoking: AVR8/GNU C Compiler : 5.4.0
		"C:\Program Files (x86)\Atmel\Studio\7.0\toolchain\avr8\avr8-gnu-toolchain\bin\avr-g++.exe" -funsigned-char -funsigned-bitfields -DDEBUG -DF_CPU=16000000L -DARDUINO=10808 -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR -DUSB_VID=0x2341 -DUSB_PID=0x0043 -DUSB_MANUFACTURER="\"Arduino LLC\""  -I"C:\Program Files (x86)\Atmel\Studio\7.0\Packs\Atmel\ATmega_DFP\1.4.351\include" -I"..\include\libraries\fastled-3.3.2" -I"..\include\libraries\fastled-3.3.2\lib8tion" -I"..\include\libraries\fastled-3.3.2\platforms\arm\common" -I"..\include\libraries\fastled-3.3.2\platforms\arm\d21" -I"..\include\libraries\fastled-3.3.2\platforms\arm\d51" -I"..\include\libraries\fastled-3.3.2\platforms\arm\k20" -I"..\include\libraries\fastled-3.3.2\platforms\arm\k66" -I"..\include\libraries\fastled-3.3.2\platforms\arm\kl26" -I"..\include\libraries\fastled-3.3.2\platforms\arm\mxrt1062" -I"..\include\libraries\fastled-3.3.2\platforms\arm\nrf51" -I"..\include\libraries\fastled-3.3.2\platforms\arm\nrf52" -I"..\include\libraries\fastled-3.3.2\platforms\arm\sam" -I"..\include\libraries\fastled-3.3.2\platforms\arm\stm32" -I"..\include\libraries\fastled-3.3.2\platforms\avr" -I"..\include\libraries\fastled-3.3.2\platforms\esp\32" -I"..\include\libraries\fastled-3.3.2\platforms\esp\8266" -I"..\include\core" -I"..\include\variants\standard"  -Os -fno-threadsafe-statics -ffunction-sections -fdata-sections -fpack-struct -fshort-enums -g2 -w -mmcu=atmega328p -B "C:\Program Files (x86)\Atmel\Studio\7.0\Packs\Atmel\ATmega_DFP\1.4.351\gcc\dev\atmega328p" -c -std=gnu++11 -MD -MP -MF "src/core/WString.d" -MT"src/core/WString.d" -MT"src/core/WString.o"   -o "src/core/WString.o" "../src/core/WString.cpp" 
		Finished building: ../src/core/WString.cpp
		Building file: ../src/libraries/fastled-3.3.2/colorutils.cpp
		Invoking: AVR8/GNU C Compiler : 5.4.0
		"C:\Program Files (x86)\Atmel\Studio\7.0\toolchain\avr8\avr8-gnu-toolchain\bin\avr-g++.exe" -funsigned-char -funsigned-bitfields -DDEBUG -DF_CPU=16000000L -DARDUINO=10808 -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR -DUSB_VID=0x2341 -DUSB_PID=0x0043 -DUSB_MANUFACTURER="\"Arduino LLC\""  -I"C:\Program Files (x86)\Atmel\Studio\7.0\Packs\Atmel\ATmega_DFP\1.4.351\include" -I"..\include\libraries\fastled-3.3.2" -I"..\include\libraries\fastled-3.3.2\lib8tion" -I"..\include\libraries\fastled-3.3.2\platforms\arm\common" -I"..\include\libraries\fastled-3.3.2\platforms\arm\d21" -I"..\include\libraries\fastled-3.3.2\platforms\arm\d51" -I"..\include\libraries\fastled-3.3.2\platforms\arm\k20" -I"..\include\libraries\fastled-3.3.2\platforms\arm\k66" -I"..\include\libraries\fastled-3.3.2\platforms\arm\kl26" -I"..\include\libraries\fastled-3.3.2\platforms\arm\mxrt1062" -I"..\include\libraries\fastled-3.3.2\platforms\arm\nrf51" -I"..\include\libraries\fastled-3.3.2\platforms\arm\nrf52" -I"..\include\libraries\fastled-3.3.2\platforms\arm\sam" -I"..\include\libraries\fastled-3.3.2\platforms\arm\stm32" -I"..\include\libraries\fastled-3.3.2\platforms\avr" -I"..\include\libraries\fastled-3.3.2\platforms\esp\32" -I"..\include\libraries\fastled-3.3.2\platforms\esp\8266" -I"..\include\core" -I"..\include\variants\standard"  -Os -fno-threadsafe-statics -ffunction-sections -fdata-sections -fpack-struct -fshort-enums -g2 -w -mmcu=atmega328p -B "C:\Program Files (x86)\Atmel\Studio\7.0\Packs\Atmel\ATmega_DFP\1.4.351\gcc\dev\atmega328p" -c -std=gnu++11 -MD -MP -MF "src/libraries/fastled-3.3.2/colorutils.d" -MT"src/libraries/fastled-3.3.2/colorutils.d" -MT"src/libraries/fastled-3.3.2/colorutils.o"   -o "src/libraries/fastled-3.3.2/colorutils.o" "../src/libraries/fastled-3.3.2/colorutils.cpp" 
		Finished building: ../src/libraries/fastled-3.3.2/colorutils.cpp
		Building file: ../src/libraries/fastled-3.3.2/bitswap.cpp
		Invoking: AVR8/GNU C Compiler : 5.4.0
		"C:\Program Files (x86)\Atmel\Studio\7.0\toolchain\avr8\avr8-gnu-toolchain\bin\avr-g++.exe" -funsigned-char -funsigned-bitfields -DDEBUG -DF_CPU=16000000L -DARDUINO=10808 -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR -DUSB_VID=0x2341 -DUSB_PID=0x0043 -DUSB_MANUFACTURER="\"Arduino LLC\""  -I"C:\Program Files (x86)\Atmel\Studio\7.0\Packs\Atmel\ATmega_DFP\1.4.351\include" -I"..\include\libraries\fastled-3.3.2" -I"..\include\libraries\fastled-3.3.2\lib8tion" -I"..\include\libraries\fastled-3.3.2\platforms\arm\common" -I"..\include\libraries\fastled-3.3.2\platforms\arm\d21" -I"..\include\libraries\fastled-3.3.2\platforms\arm\d51" -I"..\include\libraries\fastled-3.3.2\platforms\arm\k20" -I"..\include\libraries\fastled-3.3.2\platforms\arm\k66" -I"..\include\libraries\fastled-3.3.2\platforms\arm\kl26" -I"..\include\libraries\fastled-3.3.2\platforms\arm\mxrt1062" -I"..\include\libraries\fastled-3.3.2\platforms\arm\nrf51" -I"..\include\libraries\fastled-3.3.2\platforms\arm\nrf52" -I"..\include\libraries\fastled-3.3.2\platforms\arm\sam" -I"..\include\libraries\fastled-3.3.2\platforms\arm\stm32" -I"..\include\libraries\fastled-3.3.2\platforms\avr" -I"..\include\libraries\fastled-3.3.2\platforms\esp\32" -I"..\include\libraries\fastled-3.3.2\platforms\esp\8266" -I"..\include\core" -I"..\include\variants\standard"  -Os -fno-threadsafe-statics -ffunction-sections -fdata-sections -fpack-struct -fshort-enums -g2 -w -mmcu=atmega328p -B "C:\Program Files (x86)\Atmel\Studio\7.0\Packs\Atmel\ATmega_DFP\1.4.351\gcc\dev\atmega328p" -c -std=gnu++11 -MD -MP -MF "src/libraries/fastled-3.3.2/bitswap.d" -MT"src/libraries/fastled-3.3.2/bitswap.d" -MT"src/libraries/fastled-3.3.2/bitswap.o"   -o "src/libraries/fastled-3.3.2/bitswap.o" "../src/libraries/fastled-3.3.2/bitswap.cpp" 
		Finished building: ../src/libraries/fastled-3.3.2/bitswap.cpp
		Building file: ../src/libraries/fastled-3.3.2/FastLED.cpp
		Invoking: AVR8/GNU C Compiler : 5.4.0
		"C:\Program Files (x86)\Atmel\Studio\7.0\toolchain\avr8\avr8-gnu-toolchain\bin\avr-g++.exe" -funsigned-char -funsigned-bitfields -DDEBUG -DF_CPU=16000000L -DARDUINO=10808 -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR -DUSB_VID=0x2341 -DUSB_PID=0x0043 -DUSB_MANUFACTURER="\"Arduino LLC\""  -I"C:\Program Files (x86)\Atmel\Studio\7.0\Packs\Atmel\ATmega_DFP\1.4.351\include" -I"..\include\libraries\fastled-3.3.2" -I"..\include\libraries\fastled-3.3.2\lib8tion" -I"..\include\libraries\fastled-3.3.2\platforms\arm\common" -I"..\include\libraries\fastled-3.3.2\platforms\arm\d21" -I"..\include\libraries\fastled-3.3.2\platforms\arm\d51" -I"..\include\libraries\fastled-3.3.2\platforms\arm\k20" -I"..\include\libraries\fastled-3.3.2\platforms\arm\k66" -I"..\include\libraries\fastled-3.3.2\platforms\arm\kl26" -I"..\include\libraries\fastled-3.3.2\platforms\arm\mxrt1062" -I"..\include\libraries\fastled-3.3.2\platforms\arm\nrf51" -I"..\include\libraries\fastled-3.3.2\platforms\arm\nrf52" -I"..\include\libraries\fastled-3.3.2\platforms\arm\sam" -I"..\include\libraries\fastled-3.3.2\platforms\arm\stm32" -I"..\include\libraries\fastled-3.3.2\platforms\avr" -I"..\include\libraries\fastled-3.3.2\platforms\esp\32" -I"..\include\libraries\fastled-3.3.2\platforms\esp\8266" -I"..\include\core" -I"..\include\variants\standard"  -Os -fno-threadsafe-statics -ffunction-sections -fdata-sections -fpack-struct -fshort-enums -g2 -w -mmcu=atmega328p -B "C:\Program Files (x86)\Atmel\Studio\7.0\Packs\Atmel\ATmega_DFP\1.4.351\gcc\dev\atmega328p" -c -std=gnu++11 -MD -MP -MF "src/libraries/fastled-3.3.2/FastLED.d" -MT"src/libraries/fastled-3.3.2/FastLED.d" -MT"src/libraries/fastled-3.3.2/FastLED.o"   -o "src/libraries/fastled-3.3.2/FastLED.o" "../src/libraries/fastled-3.3.2/FastLED.cpp" 
		Finished building: ../src/libraries/fastled-3.3.2/FastLED.cpp
		Building file: ../src/libraries/fastled-3.3.2/hsv2rgb.cpp
		Invoking: AVR8/GNU C Compiler : 5.4.0
		"C:\Program Files (x86)\Atmel\Studio\7.0\toolchain\avr8\avr8-gnu-toolchain\bin\avr-g++.exe" -funsigned-char -funsigned-bitfields -DDEBUG -DF_CPU=16000000L -DARDUINO=10808 -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR -DUSB_VID=0x2341 -DUSB_PID=0x0043 -DUSB_MANUFACTURER="\"Arduino LLC\""  -I"C:\Program Files (x86)\Atmel\Studio\7.0\Packs\Atmel\ATmega_DFP\1.4.351\include" -I"..\include\libraries\fastled-3.3.2" -I"..\include\libraries\fastled-3.3.2\lib8tion" -I"..\include\libraries\fastled-3.3.2\platforms\arm\common" -I"..\include\libraries\fastled-3.3.2\platforms\arm\d21" -I"..\include\libraries\fastled-3.3.2\platforms\arm\d51" -I"..\include\libraries\fastled-3.3.2\platforms\arm\k20" -I"..\include\libraries\fastled-3.3.2\platforms\arm\k66" -I"..\include\libraries\fastled-3.3.2\platforms\arm\kl26" -I"..\include\libraries\fastled-3.3.2\platforms\arm\mxrt1062" -I"..\include\libraries\fastled-3.3.2\platforms\arm\nrf51" -I"..\include\libraries\fastled-3.3.2\platforms\arm\nrf52" -I"..\include\libraries\fastled-3.3.2\platforms\arm\sam" -I"..\include\libraries\fastled-3.3.2\platforms\arm\stm32" -I"..\include\libraries\fastled-3.3.2\platforms\avr" -I"..\include\libraries\fastled-3.3.2\platforms\esp\32" -I"..\include\libraries\fastled-3.3.2\platforms\esp\8266" -I"..\include\core" -I"..\include\variants\standard"  -Os -fno-threadsafe-statics -ffunction-sections -fdata-sections -fpack-struct -fshort-enums -g2 -w -mmcu=atmega328p -B "C:\Program Files (x86)\Atmel\Studio\7.0\Packs\Atmel\ATmega_DFP\1.4.351\gcc\dev\atmega328p" -c -std=gnu++11 -MD -MP -MF "src/libraries/fastled-3.3.2/hsv2rgb.d" -MT"src/libraries/fastled-3.3.2/hsv2rgb.d" -MT"src/libraries/fastled-3.3.2/hsv2rgb.o"   -o "src/libraries/fastled-3.3.2/hsv2rgb.o" "../src/libraries/fastled-3.3.2/hsv2rgb.cpp" 
		Finished building: ../src/libraries/fastled-3.3.2/hsv2rgb.cpp
		Building file: ../src/libraries/fastled-3.3.2/colorpalettes.cpp
		Invoking: AVR8/GNU C Compiler : 5.4.0
		"C:\Program Files (x86)\Atmel\Studio\7.0\toolchain\avr8\avr8-gnu-toolchain\bin\avr-g++.exe" -funsigned-char -funsigned-bitfields -DDEBUG -DF_CPU=16000000L -DARDUINO=10808 -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR -DUSB_VID=0x2341 -DUSB_PID=0x0043 -DUSB_MANUFACTURER="\"Arduino LLC\""  -I"C:\Program Files (x86)\Atmel\Studio\7.0\Packs\Atmel\ATmega_DFP\1.4.351\include" -I"..\include\libraries\fastled-3.3.2" -I"..\include\libraries\fastled-3.3.2\lib8tion" -I"..\include\libraries\fastled-3.3.2\platforms\arm\common" -I"..\include\libraries\fastled-3.3.2\platforms\arm\d21" -I"..\include\libraries\fastled-3.3.2\platforms\arm\d51" -I"..\include\libraries\fastled-3.3.2\platforms\arm\k20" -I"..\include\libraries\fastled-3.3.2\platforms\arm\k66" -I"..\include\libraries\fastled-3.3.2\platforms\arm\kl26" -I"..\include\libraries\fastled-3.3.2\platforms\arm\mxrt1062" -I"..\include\libraries\fastled-3.3.2\platforms\arm\nrf51" -I"..\include\libraries\fastled-3.3.2\platforms\arm\nrf52" -I"..\include\libraries\fastled-3.3.2\platforms\arm\sam" -I"..\include\libraries\fastled-3.3.2\platforms\arm\stm32" -I"..\include\libraries\fastled-3.3.2\platforms\avr" -I"..\include\libraries\fastled-3.3.2\platforms\esp\32" -I"..\include\libraries\fastled-3.3.2\platforms\esp\8266" -I"..\include\core" -I"..\include\variants\standard"  -Os -fno-threadsafe-statics -ffunction-sections -fdata-sections -fpack-struct -fshort-enums -g2 -w -mmcu=atmega328p -B "C:\Program Files (x86)\Atmel\Studio\7.0\Packs\Atmel\ATmega_DFP\1.4.351\gcc\dev\atmega328p" -c -std=gnu++11 -MD -MP -MF "src/libraries/fastled-3.3.2/colorpalettes.d" -MT"src/libraries/fastled-3.3.2/colorpalettes.d" -MT"src/libraries/fastled-3.3.2/colorpalettes.o"   -o "src/libraries/fastled-3.3.2/colorpalettes.o" "../src/libraries/fastled-3.3.2/colorpalettes.cpp" 
		Finished building: ../src/libraries/fastled-3.3.2/colorpalettes.cpp
		Building file: ../src/libraries/fastled-3.3.2/lib8tion.cpp
		Invoking: AVR8/GNU C Compiler : 5.4.0
		"C:\Program Files (x86)\Atmel\Studio\7.0\toolchain\avr8\avr8-gnu-toolchain\bin\avr-g++.exe" -funsigned-char -funsigned-bitfields -DDEBUG -DF_CPU=16000000L -DARDUINO=10808 -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR -DUSB_VID=0x2341 -DUSB_PID=0x0043 -DUSB_MANUFACTURER="\"Arduino LLC\""  -I"C:\Program Files (x86)\Atmel\Studio\7.0\Packs\Atmel\ATmega_DFP\1.4.351\include" -I"..\include\libraries\fastled-3.3.2" -I"..\include\libraries\fastled-3.3.2\lib8tion" -I"..\include\libraries\fastled-3.3.2\platforms\arm\common" -I"..\include\libraries\fastled-3.3.2\platforms\arm\d21" -I"..\include\libraries\fastled-3.3.2\platforms\arm\d51" -I"..\include\libraries\fastled-3.3.2\platforms\arm\k20" -I"..\include\libraries\fastled-3.3.2\platforms\arm\k66" -I"..\include\libraries\fastled-3.3.2\platforms\arm\kl26" -I"..\include\libraries\fastled-3.3.2\platforms\arm\mxrt1062" -I"..\include\libraries\fastled-3.3.2\platforms\arm\nrf51" -I"..\include\libraries\fastled-3.3.2\platforms\arm\nrf52" -I"..\include\libraries\fastled-3.3.2\platforms\arm\sam" -I"..\include\libraries\fastled-3.3.2\platforms\arm\stm32" -I"..\include\libraries\fastled-3.3.2\platforms\avr" -I"..\include\libraries\fastled-3.3.2\platforms\esp\32" -I"..\include\libraries\fastled-3.3.2\platforms\esp\8266" -I"..\include\core" -I"..\include\variants\standard"  -Os -fno-threadsafe-statics -ffunction-sections -fdata-sections -fpack-struct -fshort-enums -g2 -w -mmcu=atmega328p -B "C:\Program Files (x86)\Atmel\Studio\7.0\Packs\Atmel\ATmega_DFP\1.4.351\gcc\dev\atmega328p" -c -std=gnu++11 -MD -MP -MF "src/libraries/fastled-3.3.2/lib8tion.d" -MT"src/libraries/fastled-3.3.2/lib8tion.d" -MT"src/libraries/fastled-3.3.2/lib8tion.o"   -o "src/libraries/fastled-3.3.2/lib8tion.o" "../src/libraries/fastled-3.3.2/lib8tion.cpp" 
		Finished building: ../src/libraries/fastled-3.3.2/lib8tion.cpp
		Building file: ../src/libraries/fastled-3.3.2/noise.cpp
		Invoking: AVR8/GNU C Compiler : 5.4.0
		"C:\Program Files (x86)\Atmel\Studio\7.0\toolchain\avr8\avr8-gnu-toolchain\bin\avr-g++.exe" -funsigned-char -funsigned-bitfields -DDEBUG -DF_CPU=16000000L -DARDUINO=10808 -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR -DUSB_VID=0x2341 -DUSB_PID=0x0043 -DUSB_MANUFACTURER="\"Arduino LLC\""  -I"C:\Program Files (x86)\Atmel\Studio\7.0\Packs\Atmel\ATmega_DFP\1.4.351\include" -I"..\include\libraries\fastled-3.3.2" -I"..\include\libraries\fastled-3.3.2\lib8tion" -I"..\include\libraries\fastled-3.3.2\platforms\arm\common" -I"..\include\libraries\fastled-3.3.2\platforms\arm\d21" -I"..\include\libraries\fastled-3.3.2\platforms\arm\d51" -I"..\include\libraries\fastled-3.3.2\platforms\arm\k20" -I"..\include\libraries\fastled-3.3.2\platforms\arm\k66" -I"..\include\libraries\fastled-3.3.2\platforms\arm\kl26" -I"..\include\libraries\fastled-3.3.2\platforms\arm\mxrt1062" -I"..\include\libraries\fastled-3.3.2\platforms\arm\nrf51" -I"..\include\libraries\fastled-3.3.2\platforms\arm\nrf52" -I"..\include\libraries\fastled-3.3.2\platforms\arm\sam" -I"..\include\libraries\fastled-3.3.2\platforms\arm\stm32" -I"..\include\libraries\fastled-3.3.2\platforms\avr" -I"..\include\libraries\fastled-3.3.2\platforms\esp\32" -I"..\include\libraries\fastled-3.3.2\platforms\esp\8266" -I"..\include\core" -I"..\include\variants\standard"  -Os -fno-threadsafe-statics -ffunction-sections -fdata-sections -fpack-struct -fshort-enums -g2 -w -mmcu=atmega328p -B "C:\Program Files (x86)\Atmel\Studio\7.0\Packs\Atmel\ATmega_DFP\1.4.351\gcc\dev\atmega328p" -c -std=gnu++11 -MD -MP -MF "src/libraries/fastled-3.3.2/noise.d" -MT"src/libraries/fastled-3.3.2/noise.d" -MT"src/libraries/fastled-3.3.2/noise.o"   -o "src/libraries/fastled-3.3.2/noise.o" "../src/libraries/fastled-3.3.2/noise.cpp" 
		Finished building: ../src/libraries/fastled-3.3.2/noise.cpp
		Building file: ../src/libraries/fastled-3.3.2/platforms.cpp
		Invoking: AVR8/GNU C Compiler : 5.4.0
		"C:\Program Files (x86)\Atmel\Studio\7.0\toolchain\avr8\avr8-gnu-toolchain\bin\avr-g++.exe" -funsigned-char -funsigned-bitfields -DDEBUG -DF_CPU=16000000L -DARDUINO=10808 -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR -DUSB_VID=0x2341 -DUSB_PID=0x0043 -DUSB_MANUFACTURER="\"Arduino LLC\""  -I"C:\Program Files (x86)\Atmel\Studio\7.0\Packs\Atmel\ATmega_DFP\1.4.351\include" -I"..\include\libraries\fastled-3.3.2" -I"..\include\libraries\fastled-3.3.2\lib8tion" -I"..\include\libraries\fastled-3.3.2\platforms\arm\common" -I"..\include\libraries\fastled-3.3.2\platforms\arm\d21" -I"..\include\libraries\fastled-3.3.2\platforms\arm\d51" -I"..\include\libraries\fastled-3.3.2\platforms\arm\k20" -I"..\include\libraries\fastled-3.3.2\platforms\arm\k66" -I"..\include\libraries\fastled-3.3.2\platforms\arm\kl26" -I"..\include\libraries\fastled-3.3.2\platforms\arm\mxrt1062" -I"..\include\libraries\fastled-3.3.2\platforms\arm\nrf51" -I"..\include\libraries\fastled-3.3.2\platforms\arm\nrf52" -I"..\include\libraries\fastled-3.3.2\platforms\arm\sam" -I"..\include\libraries\fastled-3.3.2\platforms\arm\stm32" -I"..\include\libraries\fastled-3.3.2\platforms\avr" -I"..\include\libraries\fastled-3.3.2\platforms\esp\32" -I"..\include\libraries\fastled-3.3.2\platforms\esp\8266" -I"..\include\core" -I"..\include\variants\standard"  -Os -fno-threadsafe-statics -ffunction-sections -fdata-sections -fpack-struct -fshort-enums -g2 -w -mmcu=atmega328p -B "C:\Program Files (x86)\Atmel\Studio\7.0\Packs\Atmel\ATmega_DFP\1.4.351\gcc\dev\atmega328p" -c -std=gnu++11 -MD -MP -MF "src/libraries/fastled-3.3.2/platforms.d" -MT"src/libraries/fastled-3.3.2/platforms.d" -MT"src/libraries/fastled-3.3.2/platforms.o"   -o "src/libraries/fastled-3.3.2/platforms.o" "../src/libraries/fastled-3.3.2/platforms.cpp" 
		Finished building: ../src/libraries/fastled-3.3.2/platforms.cpp
		Building file: ../src/libraries/fastled-3.3.2/power_mgt.cpp
		Invoking: AVR8/GNU C Compiler : 5.4.0
		"C:\Program Files (x86)\Atmel\Studio\7.0\toolchain\avr8\avr8-gnu-toolchain\bin\avr-g++.exe" -funsigned-char -funsigned-bitfields -DDEBUG -DF_CPU=16000000L -DARDUINO=10808 -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR -DUSB_VID=0x2341 -DUSB_PID=0x0043 -DUSB_MANUFACTURER="\"Arduino LLC\""  -I"C:\Program Files (x86)\Atmel\Studio\7.0\Packs\Atmel\ATmega_DFP\1.4.351\include" -I"..\include\libraries\fastled-3.3.2" -I"..\include\libraries\fastled-3.3.2\lib8tion" -I"..\include\libraries\fastled-3.3.2\platforms\arm\common" -I"..\include\libraries\fastled-3.3.2\platforms\arm\d21" -I"..\include\libraries\fastled-3.3.2\platforms\arm\d51" -I"..\include\libraries\fastled-3.3.2\platforms\arm\k20" -I"..\include\libraries\fastled-3.3.2\platforms\arm\k66" -I"..\include\libraries\fastled-3.3.2\platforms\arm\kl26" -I"..\include\libraries\fastled-3.3.2\platforms\arm\mxrt1062" -I"..\include\libraries\fastled-3.3.2\platforms\arm\nrf51" -I"..\include\libraries\fastled-3.3.2\platforms\arm\nrf52" -I"..\include\libraries\fastled-3.3.2\platforms\arm\sam" -I"..\include\libraries\fastled-3.3.2\platforms\arm\stm32" -I"..\include\libraries\fastled-3.3.2\platforms\avr" -I"..\include\libraries\fastled-3.3.2\platforms\esp\32" -I"..\include\libraries\fastled-3.3.2\platforms\esp\8266" -I"..\include\core" -I"..\include\variants\standard"  -Os -fno-threadsafe-statics -ffunction-sections -fdata-sections -fpack-struct -fshort-enums -g2 -w -mmcu=atmega328p -B "C:\Program Files (x86)\Atmel\Studio\7.0\Packs\Atmel\ATmega_DFP\1.4.351\gcc\dev\atmega328p" -c -std=gnu++11 -MD -MP -MF "src/libraries/fastled-3.3.2/power_mgt.d" -MT"src/libraries/fastled-3.3.2/power_mgt.d" -MT"src/libraries/fastled-3.3.2/power_mgt.o"   -o "src/libraries/fastled-3.3.2/power_mgt.o" "../src/libraries/fastled-3.3.2/power_mgt.cpp" 
		Finished building: ../src/libraries/fastled-3.3.2/power_mgt.cpp
		Building file: ../src/libraries/fastled-3.3.2/wiring.cpp
		Invoking: AVR8/GNU C Compiler : 5.4.0
		"C:\Program Files (x86)\Atmel\Studio\7.0\toolchain\avr8\avr8-gnu-toolchain\bin\avr-g++.exe" -funsigned-char -funsigned-bitfields -DDEBUG -DF_CPU=16000000L -DARDUINO=10808 -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR -DUSB_VID=0x2341 -DUSB_PID=0x0043 -DUSB_MANUFACTURER="\"Arduino LLC\""  -I"C:\Program Files (x86)\Atmel\Studio\7.0\Packs\Atmel\ATmega_DFP\1.4.351\include" -I"..\include\libraries\fastled-3.3.2" -I"..\include\libraries\fastled-3.3.2\lib8tion" -I"..\include\libraries\fastled-3.3.2\platforms\arm\common" -I"..\include\libraries\fastled-3.3.2\platforms\arm\d21" -I"..\include\libraries\fastled-3.3.2\platforms\arm\d51" -I"..\include\libraries\fastled-3.3.2\platforms\arm\k20" -I"..\include\libraries\fastled-3.3.2\platforms\arm\k66" -I"..\include\libraries\fastled-3.3.2\platforms\arm\kl26" -I"..\include\libraries\fastled-3.3.2\platforms\arm\mxrt1062" -I"..\include\libraries\fastled-3.3.2\platforms\arm\nrf51" -I"..\include\libraries\fastled-3.3.2\platforms\arm\nrf52" -I"..\include\libraries\fastled-3.3.2\platforms\arm\sam" -I"..\include\libraries\fastled-3.3.2\platforms\arm\stm32" -I"..\include\libraries\fastled-3.3.2\platforms\avr" -I"..\include\libraries\fastled-3.3.2\platforms\esp\32" -I"..\include\libraries\fastled-3.3.2\platforms\esp\8266" -I"..\include\core" -I"..\include\variants\standard"  -Os -fno-threadsafe-statics -ffunction-sections -fdata-sections -fpack-struct -fshort-enums -g2 -w -mmcu=atmega328p -B "C:\Program Files (x86)\Atmel\Studio\7.0\Packs\Atmel\ATmega_DFP\1.4.351\gcc\dev\atmega328p" -c -std=gnu++11 -MD -MP -MF "src/libraries/fastled-3.3.2/wiring.d" -MT"src/libraries/fastled-3.3.2/wiring.d" -MT"src/libraries/fastled-3.3.2/wiring.o"   -o "src/libraries/fastled-3.3.2/wiring.o" "../src/libraries/fastled-3.3.2/wiring.cpp" 
		Finished building: ../src/libraries/fastled-3.3.2/wiring.cpp
		Building target: libArduinoCore.a
		Invoking: AVR8/GNU Archiver : 5.4.0
		C:\Program Files (x86)\Atmel\Studio\7.0\toolchain\avr8\avr8-gnu-toolchain\bin\avr-ar.exe: creating libArduinoCore.a
		"C:\Program Files (x86)\Atmel\Studio\7.0\toolchain\avr8\avr8-gnu-toolchain\bin\avr-ar.exe" -r  -o libArduinoCore.a  src/core/abi.o src/core/CDC.o src/core/HardwareSerial.o src/core/HardwareSerial0.o src/core/HardwareSerial1.o src/core/HardwareSerial2.o src/core/HardwareSerial3.o src/core/hooks.o src/core/IPAddress.o src/core/main.o src/core/new.o src/core/PluggableUSB.o src/core/PreprocessingAssembly/wiring_pulse.o src/core/Print.o src/core/Stream.o src/core/Tone.o src/core/USBCore.o src/core/WInterrupts.o src/core/wiring.o src/core/wiring_analog.o src/core/wiring_digital.o src/core/wiring_pulse.o src/core/wiring_shift.o src/core/WMath.o src/core/WString.o src/libraries/fastled-3.3.2/bitswap.o src/libraries/fastled-3.3.2/colorpalettes.o src/libraries/fastled-3.3.2/colorutils.o src/libraries/fastled-3.3.2/FastLED.o src/libraries/fastled-3.3.2/hsv2rgb.o src/libraries/fastled-3.3.2/lib8tion.o src/libraries/fastled-3.3.2/noise.o src/libraries/fastled-3.3.2/platforms.o src/libraries/fastled-3.3.2/power_mgt.o src/libraries/fastled-3.3.2/wiring.o   
		Finished building target: libArduinoCore.a
	Done executing task "RunCompilerTask".
	Using "RunOutputFileVerifyTask" task from assembly "C:\Program Files (x86)\Atmel\Studio\7.0\Extensions\Application\AvrGCC.dll".
	Task "RunOutputFileVerifyTask"
	Done executing task "RunOutputFileVerifyTask".
Done building target "CoreBuild" in project "ArduinoCore.cppproj".
Target "PostBuildEvent" skipped, due to false condition; ('$(PostBuildEvent)' != '') was evaluated as ('' != '').
Target "Build" in file "C:\Program Files (x86)\Atmel\Studio\7.0\Vs\Avr.common.targets" from project "d:\test\fastled_test\fastled_test\ArduinoCore\ArduinoCore.cppproj" (entry point):
Done building target "Build" in project "ArduinoCore.cppproj".
Done building project "ArduinoCore.cppproj".

Build succeeded.
------ Build started: Project: Blink, Configuration: Debug AVR ------
Build started.
Project "Blink.cppproj" (default targets):
Target "PreBuildEvent" skipped, due to false condition; ('$(PreBuildEvent)'!='') was evaluated as (''!='').
Target "CoreBuild" in file "C:\Program Files (x86)\Atmel\Studio\7.0\Vs\Compiler.targets" from project "d:\test\fastled_test\fastled_test\Blink\Blink.cppproj" (target "Build" depends on it):
	Using "RunCompilerTask" task from assembly "C:\Program Files (x86)\Atmel\Studio\7.0\Extensions\Application\AvrGCC.dll".
	Task "RunCompilerTask"
		Shell Utils Path C:\Program Files (x86)\Atmel\Studio\7.0\shellUtils
		C:\Program Files (x86)\Atmel\Studio\7.0\shellUtils\make.exe all --jobs 8 --output-sync 
		Building file: .././Sketch.cpp
		Invoking: AVR8/GNU C Compiler : 5.4.0
		In file included from .././Sketch.cpp:6:0:
d:\test\fastled_test\fastled_test\ArduinoCore\include\libraries\fastled-3.3.2\FastLED.h(14,21): info: #pragma message: FastLED version 3.003.002
		 #    pragma message "FastLED version 3.003.002"
		                     ^
		"C:\Program Files (x86)\Atmel\Studio\7.0\toolchain\avr8\avr8-gnu-toolchain\bin\avr-g++.exe" -funsigned-char -funsigned-bitfields -DDEBUG -DF_CPU=16000000L -DARDUINO=10808 -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR -DUSB_VID=0x2341 -DUSB_PID=0x0043 -DUSB_MANUFACTURER="\"Arduino LLC\""  -I"C:\Program Files (x86)\Atmel\Studio\7.0\Packs\Atmel\ATmega_DFP\1.4.351\include" -I"..\\..\ArduinoCore\include\core" -I"..\\..\ArduinoCore\include\libraries\fastled-3.3.2" -I"..\\..\ArduinoCore\include\libraries\fastled-3.3.2\lib8tion" -I"..\\..\ArduinoCore\include\libraries\fastled-3.3.2\platforms\avr" -I"..\\..\ArduinoCore\include\libraries\fastled-3.3.2\platforms\arm\common" -I"..\\..\ArduinoCore\include\libraries\fastled-3.3.2\platforms\arm\d21" -I"..\\..\ArduinoCore\include\libraries\fastled-3.3.2\platforms\arm\d51" -I"..\\..\ArduinoCore\include\libraries\fastled-3.3.2\platforms\arm\k20" -I"..\\..\ArduinoCore\include\libraries\fastled-3.3.2\platforms\arm\k66" -I"..\\..\ArduinoCore\include\libraries\fastled-3.3.2\platforms\arm\kl26" -I"..\\..\ArduinoCore\include\libraries\fastled-3.3.2\platforms\arm\mxrt1062" -I"..\\..\ArduinoCore\include\libraries\fastled-3.3.2\platforms\arm\nrf51" -I"..\\..\ArduinoCore\include\libraries\fastled-3.3.2\platforms\arm\nrf52" -I"..\\..\ArduinoCore\include\libraries\fastled-3.3.2\platforms\arm\sam" -I"..\\..\ArduinoCore\include\libraries\fastled-3.3.2\platforms\arm\stm32" -I"..\\..\ArduinoCore\include\libraries\fastled-3.3.2\platforms\esp\32" -I"..\\..\ArduinoCore\include\libraries\fastled-3.3.2\platforms\esp\8266" -I"..\\..\ArduinoCore\include\variants\standard"  -Os -fno-threadsafe-statics -ffunction-sections -fdata-sections -fpack-struct -fshort-enums -g2 -w -mmcu=atmega328p -B "C:\Program Files (x86)\Atmel\Studio\7.0\Packs\Atmel\ATmega_DFP\1.4.351\gcc\dev\atmega328p" -c -std=gnu++11 -MD -MP -MF "Sketch.d" -MT"Sketch.d" -MT"Sketch.o"   -o "Sketch.o" ".././Sketch.cpp" 
		Finished building: .././Sketch.cpp
		Building target: Blink.elf
		Invoking: AVR8/GNU Linker : 5.4.0
		"C:\Program Files (x86)\Atmel\Studio\7.0\toolchain\avr8\avr8-gnu-toolchain\bin\avr-g++.exe" -o Blink.elf  Sketch.o   -Wl,-Map="Blink.map" -Wl,--start-group -Wl,-lm -Wl,-lArduinoCore  -Wl,--end-group -Wl,-L"d:\test\fastled_test\fastled_test\ArduinoCore\Debug"  -Wl,--gc-sections -mmcu=atmega328p -B "C:\Program Files (x86)\Atmel\Studio\7.0\Packs\Atmel\ATmega_DFP\1.4.351\gcc\dev\atmega328p" -Os  
		Finished building target: Blink.elf
		"C:\Program Files (x86)\Atmel\Studio\7.0\toolchain\avr8\avr8-gnu-toolchain\bin\avr-objcopy.exe" -O ihex -R .eeprom -R .fuse -R .lock -R .signature -R .user_signatures  "Blink.elf" "Blink.hex"
		"C:\Program Files (x86)\Atmel\Studio\7.0\toolchain\avr8\avr8-gnu-toolchain\bin\avr-objcopy.exe" -j .eeprom  --set-section-flags=.eeprom=alloc,load --change-section-lma .eeprom=0  --no-change-warnings -O ihex "Blink.elf" "Blink.eep" || exit 0
		"C:\Program Files (x86)\Atmel\Studio\7.0\toolchain\avr8\avr8-gnu-toolchain\bin\avr-objdump.exe" -h -S "Blink.elf" > "Blink.lss"
		"C:\Program Files (x86)\Atmel\Studio\7.0\toolchain\avr8\avr8-gnu-toolchain\bin\avr-objcopy.exe" -O srec -R .eeprom -R .fuse -R .lock -R .signature -R .user_signatures "Blink.elf" "Blink.srec"
		"C:\Program Files (x86)\Atmel\Studio\7.0\toolchain\avr8\avr8-gnu-toolchain\bin\avr-size.exe" "Blink.elf"
		   text	   data	    bss	    dec	    hex	filename
		   3942	     18	     66	   4026	    fba	Blink.elf
	Done executing task "RunCompilerTask".
	Using "RunOutputFileVerifyTask" task from assembly "C:\Program Files (x86)\Atmel\Studio\7.0\Extensions\Application\AvrGCC.dll".
	Task "RunOutputFileVerifyTask"
				Program Memory Usage 	:	3960 bytes   12.1 % Full
				Data Memory Usage 		:	84 bytes   4.1 % Full
				Warning: Memory Usage estimation may not be accurate if there are sections other than .text sections in ELF file
	Done executing task "RunOutputFileVerifyTask".
Done building target "CoreBuild" in project "Blink.cppproj".
Target "PostBuildEvent" skipped, due to false condition; ('$(PostBuildEvent)' != '') was evaluated as ('' != '').
Target "Build" in file "C:\Program Files (x86)\Atmel\Studio\7.0\Vs\Avr.common.targets" from project "d:\test\fastled_test\fastled_test\Blink\Blink.cppproj" (entry point):
Done building target "Build" in project "Blink.cppproj".
Done building project "Blink.cppproj".

Build succeeded.
========== Build: 2 succeeded or up-to-date, 0 failed, 0 skipped ==========

 

  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

Thanks - I updated #33 from that.

 

EDIT

 

So there is something wrong with the OP's setup, and his command-line defines are not being set up properly.

Top Tips:

  1. How to properly post source code - see: https://www.avrfreaks.net/comment... - also how to properly include images/pictures
  2. "Garbage" characters on a serial terminal are (almost?) invariably due to wrong baud rate - see: https://learn.sparkfun.com/tutorials/serial-communication
  3. Wrong baud rate is usually due to not running at the speed you thought; check by blinking a LED to see if you get the speed you expected
  4. Difference between a crystal, and a crystal oscillatorhttps://www.avrfreaks.net/comment...
  5. When your question is resolved, mark the solution: https://www.avrfreaks.net/comment...
  6. Beginner's "Getting Started" tips: https://www.avrfreaks.net/comment...
Last Edited: Thu. Jul 2, 2020 - 09:30 AM
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0


To add a bit more detail to how I created this solution. I started in Arduino 1.8.8 and tried Manage Libraries...

 

It's that top entry I wanted but my firewall won't allow this to download it directly. However it told me the link at  http://downloads.arduino.cc/libraries/github.com/FastLED  that is was trying to download the .zip from so I did that separately. I then used:

 

 

to add the library I just downloaded so now it appears as:

 

 

but I didn't even bother to use that I just went to "Examples" on the "File" menu and use "Blink" to create a new sktech:

 

 

Having created that sketch I then switched over to AS7, used File-Ne Project... and selected "Create project from Arduino sketch". I filled in the details as:

 

 

and then, when it finished creating the project I just used:

 

 

which lead to the successful build you see above. I didn't edit/change anything in all this - just straight from a download of "fastled" to the AS7 build exactly as shown. 

 

As I say the only way this  might deviate from the way anyone else would do it is that I had to manually download the .zip file for the FastLED library separately as I can't do it "within" the Arduino IDE as my corporate firewall won't allow that to access the outside world automatically. (so I did it manually instead)

  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

I suspect OP didn't follow the correct import procedure into AS.

 

Probably time for  paulsnop   to go back to square one, and start a new AS project from scratch.

 

 

Top Tips:

  1. How to properly post source code - see: https://www.avrfreaks.net/comment... - also how to properly include images/pictures
  2. "Garbage" characters on a serial terminal are (almost?) invariably due to wrong baud rate - see: https://learn.sparkfun.com/tutorials/serial-communication
  3. Wrong baud rate is usually due to not running at the speed you thought; check by blinking a LED to see if you get the speed you expected
  4. Difference between a crystal, and a crystal oscillatorhttps://www.avrfreaks.net/comment...
  5. When your question is resolved, mark the solution: https://www.avrfreaks.net/comment...
  6. Beginner's "Getting Started" tips: https://www.avrfreaks.net/comment...
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

awneil wrote:
I suspect OP didn't follow the correct import procedure into AS.
Me too, which is why I showed so many pictures ;-)

  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

As I explained in #24 ArduinoCore was not compiling therefore you get lots of errors, but then it accidentally worked on Win7 (with Arduino 1.8.7) . Imported 2 more projects and they imported and worked 1st go, had them running on real hardware.

 

No such luck on Win10 and Arduino 1.8.12, so maybe Win10 need some special incantation to get it to work, I'll try again later on today.

 

 

John Samperi

Ampertronics Pty. Ltd.

www.ampertronics.com.au

* Electronic Design * Custom Products * Contract Assembly

  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

Because of AS7 has more debugging features

  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

That's my response on why not just use the Adruino IDE

  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

So it's beyond my understanding using Windows 10 (Win 7 OK as above)

 

Tried running as administrator: No cigar

 

While running as administrator: Deleted project folder and created the project from scratch, still no cigar, about 30 errors at least.

 

I note that Cliff is running Arduino 1.8.8 and I'm running Arduino 1.8.7 in Win7 and they both work.

I'm running Win 10  pro with Arduino 1.8.12 on the laptop and this combination does not work.

Sorry paulsnop I see you have a real problem but will need someone a lot brighter than me to help you. sad

 

John Samperi

Ampertronics Pty. Ltd.

www.ampertronics.com.au

* Electronic Design * Custom Products * Contract Assembly

  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

js wrote:
Deleted project folder and created the project from scratch, still no cigar, about 30 errors at least.
Did you follow the exact steps I showed ? As I say it just worked straight off for me.

 

Idea: I still have the project, I'll zip it and post it here - see if it builds OK for everyone else (can't think why it wouldn't but you never know!). One mo' ...

 

EDIT: done.

Attachment(s): 

Last Edited: Fri. Jul 3, 2020 - 08:14 AM
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

awneil wrote:

I suspect OP didn't follow the correct import procedure into AS.

clawson wrote:
Me too, which is why I showed so many pictures ;-)

I also wrote:
Probably time for  paulsnop   to go back to square one, and start a new AS project from scratch

and, as clawson did, capture & post screen shots of the process - so we can all see exactly what was done

 

 

Top Tips:

  1. How to properly post source code - see: https://www.avrfreaks.net/comment... - also how to properly include images/pictures
  2. "Garbage" characters on a serial terminal are (almost?) invariably due to wrong baud rate - see: https://learn.sparkfun.com/tutorials/serial-communication
  3. Wrong baud rate is usually due to not running at the speed you thought; check by blinking a LED to see if you get the speed you expected
  4. Difference between a crystal, and a crystal oscillatorhttps://www.avrfreaks.net/comment...
  5. When your question is resolved, mark the solution: https://www.avrfreaks.net/comment...
  6. Beginner's "Getting Started" tips: https://www.avrfreaks.net/comment...
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

js wrote:
I'm running Win 10  pro with Arduino 1.8.12 on the laptop and this combination does not work.

That combo would not work on my laptop Win10 either, get the arduino startup splash screen then nothing.

Downloaded 1.8.13 and it works now.

Jim

 

 

(Possum Lodge oath) Quando omni flunkus, moritati.

"I thought growing old would take longer"

 

  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

Did you follow the exact steps I showed ? As I say it just worked straight off for me.

Yes, it works on Win 7 with a different Arduino version but not on Win 10 pro with Arduino 1.8.12

That combo would not work on my laptop Win10 either ..... Downloaded 1.8.13 and it works now.

wink I'll try the newer version.

John Samperi

Ampertronics Pty. Ltd.

www.ampertronics.com.au

* Electronic Design * Custom Products * Contract Assembly

  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

Downloaded 1.8.13 and it works now

It now works here too with that version! Thanks, hope the OP can also say the same.

John Samperi

Ampertronics Pty. Ltd.

www.ampertronics.com.au

* Electronic Design * Custom Products * Contract Assembly

  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

I finally got the code to compile in AS7 with windows 10 by commenting out the following lines below in file "led_sysdefs_avr.h. I still have tried to run the code on the hardware yet however.

 

// special defs for the tiny environments
//#if defined(__AVR_ATmega32U2__) || defined(__AVR_ATmega16U2__) || defined(__AVR_ATmega8U2__) || defined(__AVR_AT90USB162__) || defined(__AVR_ATtiny24__) || defined(__AVR_ATtiny44__) || defined(__AVR_ATtiny84__) || defined(__AVR_ATtiny25__) || defined(__AVR_ATtiny45__) || defined(__AVR_ATtiny85__) || defined(__AVR_ATtiny167__) || defined(__AVR_ATtiny87__) || defined(__AVR_ATtinyX41__) || defined(__AVR_ATtiny841__) || defined(__AVR_ATtiny441__)
//#define LIB8_ATTINY 1
//#define FASTLED_NEEDS_YIELD
//#endif

//#if defined(ARDUINO) && (ARDUINO > 150) && !defined(IS_BEAN) && !defined (ARDUINO_AVR_DIGISPARK) && !defined (LIB8_TINY) && !defined (ARDUINO_AVR_LARDU_328E)
// don't need YIELD defined by the library 
//#else 
#define FASTLED_NEEDS_YIELD
extern "C" void yield();
//#endif
#endif
 

  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

I meant:  I still have not tried to run the code on the hardware yet however.

  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

It also compiles if I comment out the lines below also.

 

#define FASTLED_NEEDS_YIELD
extern "C" void yield();

  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

Please see Tip #1 in my signature for how to properly post source code.

Top Tips:

  1. How to properly post source code - see: https://www.avrfreaks.net/comment... - also how to properly include images/pictures
  2. "Garbage" characters on a serial terminal are (almost?) invariably due to wrong baud rate - see: https://learn.sparkfun.com/tutorials/serial-communication
  3. Wrong baud rate is usually due to not running at the speed you thought; check by blinking a LED to see if you get the speed you expected
  4. Difference between a crystal, and a crystal oscillatorhttps://www.avrfreaks.net/comment...
  5. When your question is resolved, mark the solution: https://www.avrfreaks.net/comment...
  6. Beginner's "Getting Started" tips: https://www.avrfreaks.net/comment...

Pages