This is my first post here so I apologise in advance.
I am using Windows 10 which detects my Nano and downloads the drivers automatically.
They seem to be the latest ones.
I'm using the correct com port and selected the Arduino Nano in the drop down and tried both ATmega328P and ATmega328P old bootloader.
I have used a couple of different cables.
The L light on the Nano flashes red every 2 seconds unless I press and hold the reset button. When I do that it doesn't flash. When I plug the USB in the L led flashes red three times quickly and then twice and couple of times and then 3 times quickly before settling on flashing every couple of seconds again. The RX light flashes very dimly when attempting upload.
I have the correct data port selected as well.
From what I've read (which isn't alot because the Arduino forums are currently down) is that I may have a possible bootload issue.
When I attempt an upload to the Nano I get the below timeout error and I always get this error no matter what board type I choose in the tools drop down.
Here is my nano
Thanks in advance. Hopefully someone can help