Standby with the timer and PWM running on SAMD21

Log in or register to post comments
Go To Last Post
2 posts / 0 new
Author
Message
jmaja1
jmaja1's picture
Level: Hangaround
Joined: Tue. Mar 16, 2010
Posts: 339 View posts
Location: Finland
#1
Posted by jmaja1: Fri. Apr 21, 2017 - 12:24 AM
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

How can this be done without ASF (or even with it)? I have set RUNSTDBY flags in many places and it draws more current than in pure standby (700 uA now compared to 2.5 uA all disabled), but PWM stops. Which registers must have the RUNSTDBY flag? I have it now in the following: SYSCTRL->OSC8M.reg, SYSCTRL->DFLLCTRL.reg , GCLK->GENCTRL.reg and TC4->COUNT16.CTRLA.reg

 

Tags:

Atmel SMART ARM-based MCUs and MPUs, Atmel Cortex-M MCUs
Top
Lajon
Lajon's picture
Level: Raving Lunatic
Joined: Fri. Mar 12, 2004
Posts: 2561 View posts
Location: Linköping, Sweden
Posted by Lajon: Sat. Apr 22, 2017 - 01:42 PM
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

    SYSCTRL->VREG.bit.RUNSTDBY = 1;

if you have a revision A or B (check the Errata section).

/Lars

Top