SP2 for Studio 4.11 is available from http://www.atmel.no/beta_ware. It fixed a problem I was having when programming the Tiny11 with the STK500.
Leon Heller G1HSM
It didn't fix my problem with ICE50!
Assembler 2 is still buggy.
Attempt to redifine keyword OR
.equ OR =3
The above line is in the 8535.inc file
Attempt to redefine keyword SUB
.equ SUB =0x1A ;^Z Substitute
The above line is part of my ASCII definitions file.
Illegal reuse of instruction 'adc' as label
ADC: (followed by ISR code)
Yet the data sheet show:
rjmp ADC ;ADC Conversion Complete Handler
Assembler 1.77 is still buggy (I know it's no longer supported).
Gargabe at the end of line.
Happily V1.74 of the assembler works well, so i'm sticking to that version :D . I hope SP2 has fixed other things and not broken others.
Ampertronics Pty. Ltd.
* Electronic Design * Custom Products * Contract Assembly
Anyone knows if the servicepacks are culmulative
I now have a "Studio" , a servicepack 1 and a servicepack2
And i have appied both sp1 & sp2 ... just wondered
first install studio (build 401) and afterwards sp2 (build 406). this should work.
@gerhardf ... thanx
I also noticed you should install the CAN addon if you want to try that one , its not included in SP2
And hence the above , the support for Tiny11 is probably not included too
I think you need the ICE50 hardware to make use of the CAN plug in.
In the GCC forum https://www.avrfreaks.net/index.p...
I did simulate a test program made for CAN , but at first i got an error.
Then i installed the CAN plugin , and there was no error.
This was not a program that used any CAN features , just a test to help out.
© 2019 Microchip Technology Inc.