samv71 gps and wifi module
Same way you'd interface anything with anything else:
Documentation for the SAM V71 Xplained Ultra Evaluation Kit is here:
If someone is having example code pls help me ....
your question is too vague to be able to give any samples.
have you actually tried searching yourself?
There must be literally thousands of examples of people who've connected GPS units to microcontrollers
As for WiFi, the board has an Ethernet connection - so just connect that straight to your WiFi access point ...
I wanted for SAMV71 thats why i asked.
But how would handling a GPS device on a SAMV71 be any different from handling a GPS device on any other platform?
The GPS device neither knows nor cares what microcontroller you're using - it's behaviour does not change when you use a different "host" !
Similarly for WiFi.
which one is good for SAMV71 ATMEL studio or KEIL?
Both will be fine.
Keil will not give you the ASF Wizard stuff.
Atmel Studio will automatically recognise an XPlained-Pro board, and will present you with its list of ready-to-go examples specifically written for that board.
Sir as u said do interfacing of wifi (802.11p which I am having) with on board ethernet that I am not getting.
Wifi part as u said I am not getting sir. please help.
Usually, a WiFi access point just connects to the network via Ethernet - doesn't it?
Sir I m using VERA -P173 UBLOX this module for Wifi.
So, again, it's back to basics: http://www.8052.com/forum/read/1...
Do I need to write driver for Vera P-173 wifi module ?
You're going to have to write some interface code - call it a "driver" if you like.
Again, see: http://www.8052.com/forum/read/1...
For support, you would need to contact the module and/or chip manufacturer.
Example codes are present in ATMEL STUDIO, but I want to write my own drivers for every peripheral, is it easy or difficult ??/
is it easy or difficult ?
That depends on your level of skill and experience.
Again, the process is as described here: http://www.8052.com/forum/read/1...
I would doubt that interfacing a WiFi module is going to be a beginner project ...
can u please tell me how to interface GLCD with samv71 board.
In samv71 evaluation board target usb port is there so i want to make that target usb port as Embedded debugger port how to do please help
Same answer as #2 !
i want to make that target usb port as Embedded debugger port how to do please help
The board already has an embedded debugger - and a USB socket for it!
Have you actually ready the User Manual yet?
I know but our team made new development board for our project based on samv71, in that board Embedded debugger is not there Simple USB is there and I wanted to know can I make that USB port as Embedded debug port if yes then how ??????
You need to get an Atmel-ICE or 3rd-party debug probe (eg, Segger J-Link).
I am an italian engineer with no MPUs skills, so I hope that you can help me about my trouble on using the SDRAM embeded on the SAM V71 board.
I am looking for a "ready to use" Atmel Studio 7 project for access the embeded SDRAM on my evaluation board.
I found sdram.h and sdram.c surfing on internet, but I cannot compile without error (i.e. this #include "chip.h" doesn't work, unknown type for SSdramc_Memory*p)
Thank you for aswering or suggestion, link or something else ...
© 2022 Microchip Technology Inc.