OC1 of AT90S2313

1 post / 0 new
Author
Message
#1
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

In the compare mode and COM1A1,0 are set to 1,0( or 1,1); while match, the OC1 is set to 0(or 1). How to do to recover OC1 back to 1(or 0). The OC1 should effect the bit of outport PORTB.PORTB3, why in the Studio3 it effected the bit of inputport PINB.PINB3.