can any body help me out to make an OBD2 hardware by using simple techniques?
I am in urgent need of OBD2 circuit but I could not buy new one so I need to make one for me by myself..
BR / Yasir Qureshi
Welcome to AVR-freaks.
You posted your question in the wrong forum. Each forum has a description in a Sticky Topic, found in the top of the Forum. Take a few minutes to familiarize yourself with these guidelines.
I will move your post to the correct forum, and will leave a shadow in this forum: clicking that moved post will bring you to the correct forum.
Use the Search-facility of this forum to find previous posts on OBD
They are called Rosa, Sylvia, Tricia, and Ulyana. You can find them https://www.linuxmint.com/
Dragon broken ? http://aplomb.nl/TechStuff/Dragon/Dragon.html for how-to-fix tips
Try searching the forums for ODB. Here is one link from an old thread:
I don' really know a lot about what you need, but I do know that OBD2 for experimenters often involves an ELM chip or a mobydic product
These chips apparently get the signals to something useful. Most folks drive them with a pc. However, you might be able to use an embedded system to get what you need.
-- you might get more help in the General Electronics section of this forum.
Also, I'm guessing that from your location , you might have problems finding a lot of resources. However, there are a lot of OBD2 scanners available, and it would probably be worth some reseach.
A bundle of thanks for every one.. :) It was pretty helpful for me.
...so tell us what you did in the 2.5 years between your posts - it might help others!
© 2021 Microchip Technology Inc.