LM75 alternative

Go To Last Post
6 posts / 0 new
Author
Message
#1
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

Howdy folks !

 

Is there any temperature sensor like LM75 but in a DIP package ? I came to a project in my book which teaches about I2C protocol and the project requires LM75 temperature sensor. All the LM75s i found were in SMD package and i don't have a soldering iron to solder it onto some interface board. Or is there something else that teaches about I2C protocol with another device which is easy to plug onto breadboard ?

 

  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

Adafruit sell all sorts of breakout boards that feature devices that use I2C, accelerometers, temperature and relative humidity sensors, touchscreen controllers - take your pick!

  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

David (aka frog_jr)

  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

Same for sparkfun.com

Click Link: Get Free Stock: Retire early! PM for strategy

share.robinhood.com/jamesc3274
get $5 free gold/silver https://www.onegold.com/join/713...

 

 

 

 

  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

As far as getting back on topic, you could also look at the LM34

http://www.ti.com/lit/ds/symlink...

 

and LM35

http://www.ti.com/lit/ds/symlink...

 

Which come in TO-92 packages and work well in a breadboard.

 

Then there is Maxim

https://www.maximintegrated.com/...

 

https://www.maximintegrated.com/...

 

https://www.maximintegrated.com/...

 

https://www.maximintegrated.com/...

 

I have used the DS1621 and it works well.  Used the LM34 and LM 35 as well.

 

JIm

I would rather attempt something great and fail, than attempt nothing and succeed - Fortune Cookie

 

"The critical shortage here is not stuff, but time." - Johan Ekdahl

 

"Step N is required before you can do step N+1!" - ka7ehk

 

"If you want a career with a known path - become an undertaker. Dead people don't sue!" - Kartman

"Why is there a "Highway to Hell" and only a "Stairway to Heaven"? A prediction of the expected traffic load?"  - Lee "theusch"

 

Speak sweetly. It makes your words easier to digest when at a later date you have to eat them ;-)  - Source Unknown

Please Read: Code-of-Conduct

Atmel Studio6.2/AS7, DipTrace, Quartus, MPLAB, RSLogix user

  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

Look at the last post in this thread:

 

https://www.avrfreaks.net/forum/s...

 

I put up a list of alternate parts.  I could not copy them to this thread

 

JIm

I would rather attempt something great and fail, than attempt nothing and succeed - Fortune Cookie

 

"The critical shortage here is not stuff, but time." - Johan Ekdahl

 

"Step N is required before you can do step N+1!" - ka7ehk

 

"If you want a career with a known path - become an undertaker. Dead people don't sue!" - Kartman

"Why is there a "Highway to Hell" and only a "Stairway to Heaven"? A prediction of the expected traffic load?"  - Lee "theusch"

 

Speak sweetly. It makes your words easier to digest when at a later date you have to eat them ;-)  - Source Unknown

Please Read: Code-of-Conduct

Atmel Studio6.2/AS7, DipTrace, Quartus, MPLAB, RSLogix user