Free software was $$$$

Go To Last Post
13 posts / 0 new
Author
Message
#1
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 1

Many years ago (>25), I used Microcap circuit drawing/simulation package extensively (on a '486 PC, with an early version of Windows) ...our engineering center paid several thousand $$ to get it. Microcap folks were always very helpful & supportive & a class act.  They have, of course, improved it along the way, but I was no longer at the same company, so lost track of it.  But they continued on over the years.

 

Cash Price Credit Card Price
Micro-Cap 12 $4495 $4720
Micro-Cap 12 LAN Version ( Per Seat / Two Seat Minimum ) $4495 $4720

 

Apparently they went belly up (probably due to competitors like Linear Tech's free simulation offerings).  So it was harder to sell for thousands of $$

Anyhow, they did something really COOL, they now say they it's free for anyone who wants it:  

Effective 7/4/2019, Spectrum Software is closed. Micro-Cap is now free.

These new versions do not require the security key, so they make Micro-Cap free to the entire engineering community. Thank you for the honor and privilege of serving you for the last 39 years.
Spectrum Software  

http://www.spectrum-soft.com/download/mc12_brochure.pdf

http://www.spectrum-soft.com/download/download.shtm

 

Get it while the website is still around!  ...of course there will be no updates & you have to consider whether it is worthwhile to invest your time learning a software that is defunct....but hey, who can resist?
 

Extensive Features•64-bit version for large circuits• Multi-page hierarchical schematic editor• PSpiceTM, SPICE3, and many HSPICETMcommands and models supported• Threading support for multiple CPUs and faster simulations• Native digital simulation engine• Periodic Steady State analysis• Integral circuit optimizer with multiple optimization methods• Worst Case analysis with RSS, Monte Carlo, and Extreme Value Analysis• Smoke / Stress analysis• Harmonic and intermodulation distortion analysis• Stability analysis for linear systems• Integrated active and passive filter design function• Parts library with over 33,000 parts• Analog and digital behavioral modeling• Schematic waveform probing• On-schematic voltage/state, current, power, and condition display• Dynamic analysis updates waveforms and curves as you edit• During the run plotting• Smith charts / polar plots• Multidimensional parameter stepping• Monte Carlo analysis• Integrated spreadsheet that recognizes simulation values• 3D plotting• .Measure and Performance Function plots• Optimizing parts modeler• Gummel-Poon, Mextram and Modella bipolar models• Berkeley BSIM 1, BSIM 2, BSIM3, and BSIM4 MOSFET models• EKV V2.6 MOSFET model• Hefner IGBT model• IBIS model translator• Animated LEDs, switches, bars, meters, relays, stoplights, and DC motors• Jiles-Atherton nonlinear magnetics model• PCB interface to popular packages• LAN version for collaborative projects

 

 

 

When in the dark remember-the future looks brighter than ever.   I look forward to being able to predict the future!

Last Edited: Thu. Jan 2, 2020 - 09:04 AM
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

Lately, I visited the site and downloaded almost all its files and info (150M). Yes it is free, but learning it and be familiar with... cost time and I am 70 smiley

I wonder if there is a group/forum about Micro-Cap 12.

  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

avrcandies wrote:
Get it while the website is still around!

 

Fortunately most of it seems to be already archived in the Wayback Machine. So even if it goes down, something will survive.

https://web.archive.org/web/2019...

  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

avrcandies,

 

Thanks so much for the link.  Download was quick and the MC-12 software will even work with a XP machine (although i will use it on a Windows 7 Dell).  I generally do not draw more than three schematics per year and use pencil / paper so it will be interesting to learn the SW and try its simulation capabilities.   Since I'm retired, learning will be part of the fun.

 

Alan

  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

 I generally do not draw more than three schematics per year

That's smart, there is probably some state tax if you draw 4 or more.  surprise  Enjoy microcap...it was a really useful tool & at the time I started using it (around 1991), it was the only program that let you both draw & analyze the circuit.  We also had some expensive pspice packages, but you had to create your own netlist file to use them (hence, no circuit probing).   LTspice is also free & good for simulation.

When in the dark remember-the future looks brighter than ever.   I look forward to being able to predict the future!

  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

Thanks for the share. The name Micro-Cap rings a bell with me from many moons ago although I also remember somehing called Micro-Sim. I guess that was a predecessor.

 

Only glanced over the site but didn't see much drum banging about why one should spend thousands versus free-of-charge LT-Spice or even TINA from TI. Death of a company by poor marketing perhaps.

 

 

  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0



I also remember somehing called Micro-Sim.

Ah yes, that is the other package I was referring to!!...you couldn't just draw & hit simulate with micro-sim. In fact, I think we had to use a separate "app", or draw on paper & make a netlist file ourselves to send to it.  At the time, Microcap beat the pant off micro-sim for ease of use.   In, fact the power of the internet brings it all back:

Using Microcap seemed like a HUGE leap forward...I was even allowed to get my own PC....utopia! 

When in the dark remember-the future looks brighter than ever.   I look forward to being able to predict the future!

  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

This "tour" shows some impressive capabilities:

 

http://www.spectrum-soft.com/demo/schemati.shtm

 

I forgot about their monte-carlo, used it many times years ago.

 

this "tutorial" video might be useful:   https://www.youtube.com/watch?reload=9&v=vd1W7_Sj9jI

When in the dark remember-the future looks brighter than ever.   I look forward to being able to predict the future!

Last Edited: Thu. Jan 2, 2020 - 06:20 PM
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

N.Winterbottom wrote:
why one should spend thousands versus free-of-charge LT-Spice or even TINA from TI

 

One thing that helps Labcenter to still be able to charge for Proteus, IMO, is that it can integrate MCUs (with a loaded program) in an analog simulation.

 

note: the full version of TINA can also do that (not the free one from TI)

Last Edited: Thu. Jan 2, 2020 - 06:20 PM
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

One thing that helps Labcenter to still be able to charge for Proteus, IMO, is that it can integrate MCUs (with a loaded program) in an analog simulation

I'd like to see a Bode plot of that!!...sounds a bit absurd. Perhaps useful in a transient response of a control loop (such as a software PID). 

When in the dark remember-the future looks brighter than ever.   I look forward to being able to predict the future!

  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

avrcandies wrote:
sounds a bit absurd.

 

I don't know how well it works, really. I just used it a couple of times several years back. For simple things like this it's ok: https://youtu.be/xyZHl9Y5RPo

How well is that crystal connected to the MCU simulated, for example? IDK.

  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

I mean absurd in terms of putting in a micro & trying to do an analog freq sweep with the whole kaboodle.  Once you start simulating the AVR, it seems like you'd be stuck in the time domain...but perhaps not? 

When in the dark remember-the future looks brighter than ever.   I look forward to being able to predict the future!

  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

Yeah, that's an interesting question. Maybe the simulation can cope with a frequency sweep while running the MCU emulation. I'm not sure.