EMI filter

Go To Last Post
3 posts / 0 new
Author
Message
#1
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

As the last resort I post the following question:

Preamble- I import some equipment from Holland which has a control panel configurable for single and three phase operation.
Originally the equipment was designed to cater to a load in the order of 3.5kW and therefore has three line filters rated at 20A each.
Filter capacitors ( 2 off ) are 22nF to ground from Line and Neutral.
These capacitors contribute to leakage current seen by a residual current device.
In single phase configuration all three EMI filters are connected in parallel and accordingly the leakage current is in the order of 6mA plus.
On a 10mA RCD ( which typically trips out on 8mA as an added safety feature ) additional 6 Ma causes a trip.

Question:

Filter has following markings

F.1454047040-20
0.47uF ( X1 ) + 2x 22nF ( Y2 )
+2 x 1mH + 680kohm

250VAC 20A
EN133200 HPF

and a graphic logo with a what looks like a stylised BK

Google search did not help

Does anybody recognise the part number/ source/ supplier?

Much obliged.

  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

Google provides results for "EN133200 HPF" The BK is probably a BF.

Don't use quotes around the search terms.

  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

Found them.. wooohooooo

Brandenburgischen Kondensatoren

P.S. EN133200 HPF refer to various current and deprecated standards