Bored to death here! After cataract surgery and being stuck at home for a week I'm considering re activating my FB account or search out for a local drug dealer.......
But I opted to mess around with the SAM boards I got from Atmel a while ago instead.
So the boards both have 64 pin devices with 256K of flash but the SAMD21 board has an additional USB connector, the USB seems to be the main differences between the 2 chips from a one eyed look at the datasheets.
Anything else that I should be aware of? The aim at the moment is to start with the usual flashing led and then port my AVR GLCD touch code to one of the boards, nothing too complicated.
I have already ported the above code to the NXP LPCwhatever M0 chip a couple of years ago so It should be a piece of cake, yellow cake that is.