Connection problems with AS6 and Atmel interfaces

Log in or register to post comments
Go To Last Post
5 posts / 0 new
Author
Message
Gold Markclawson
clawson's picture
Level: Moderator
Joined: Mon. Jul 18, 2005
Posts: 100395 View posts
Location: (using avr-gcc in) Finchingfield, Essex, England
#1
Posted by clawson: Mon. Dec 2, 2013 - 02:52 PM
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

If you are having any kind of problem maybe start by trying the latest USB drivers that are mentioned in this post:

https://www.avrfreaks.net/index.p...

Tags:

Tools, Atmel Studio (AVR-related)
Last Edited: Wed. Nov 2, 2016 - 07:17 PM
Top
davethomaspilot
davethomaspilot's picture
Level: Resident
Joined: Tue. Dec 22, 2009
Posts: 510 View posts
Location: Raleigh, NC
Posted by davethomaspilot: Thu. Dec 12, 2013 - 07:16 PM
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

My problem occurs on some 328 devices after trying to set the DWEN fuse.

I always get an error message during the ISP programming of that fuse, something like the "operation terminated because of a previous command error".

Usually, I can eventually get debugWire interface working by "bumbling, stumbling" around. Of course setting the interface from ISP to debugWire, but I haven't found a way that I can repeat reliably to get up and going under debugWire.

I never disable SPI fuse, nor use HV programming.

Now, I have the second device that seems to be ruined, after trying to set DWEN fuse using ISP. Can't do anything ISP or debugWire.

Other devices still in debugWire can be still be programmed and debugged fine, so it doesn't seem USB related.

AtmelStudio 6.1.2730
Atmega 328

Thanks,

Dave Thomas

Top
davethomaspilot
davethomaspilot's picture
Level: Resident
Joined: Tue. Dec 22, 2009
Posts: 510 View posts
Location: Raleigh, NC
Posted by davethomaspilot: Thu. Dec 12, 2013 - 07:18 PM
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

Programmer is AVR Dragon.

Top
Gold Markclawson
clawson's picture
Level: Moderator
Joined: Mon. Jul 18, 2005
Posts: 100395 View posts
Location: (using avr-gcc in) Finchingfield, Essex, England
Posted by clawson: Thu. Dec 12, 2013 - 07:18 PM
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

Quote:

I always get an error message during the ISP programming of that fuse

No one should be using ISp to change DWEN. Just let Studio handle the switching of the fuse into and out of debug mode.

(your post is off-topic for this thread so let's continue further discussion elsewhere).

Top
davethomaspilot
davethomaspilot's picture
Level: Resident
Joined: Tue. Dec 22, 2009
Posts: 510 View posts
Location: Raleigh, NC
Posted by davethomaspilot: Fri. Dec 13, 2013 - 12:55 AM
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

Ok, sorry for the off topic. Started a new thread.

Top