I'm bowing to your greater knowledge...
Can you tell me if the ATmega32 chip running at 16MHz is capable of driving a servo, operating a shutter on a camera, chosing the mode on a camera opearating 2 relays and monitoring 3 temperature sensors and one barometer all in the same piece of code?
The temp sensors only need to be read every 60 seconds the servo needs to move 3 times every 5 minutes to position the camera an then operate the shutter. The relays need to be triggered every 10 minutes to power cycle the camera and the gps/gsm tracker.
Does this sound feasable or impossible, my lack of knowledge is going to be the biggest test of all.
Any response greatfully received!