Has anyone used the ATMEGA8515 with AVRDUDE?
I tried to add the part to the conf. file when I tried to program the part I get the following response:
C:\winavr>avrdude -c pw -p m85 -i test.hex
AVRDUDE: AVR device initialized and ready to accept instructions
AVRDUDE: Device signature = 0x1e9301
AVRDUDE: reading input file "test.hex"
AVRDUDE: input file test.hex auto detected as Intel Hex
AVRDUDE: writing flash (4546 bytes):
AVRDUDE: 4546 bytes of flash written
AVRDUDE: verifying flash memory against test.hex:
AVRDUDE: reading on-chip flash data:
AVRDUDE: verifying ...
AVRDUDE: verification error, first mismatch at byte 0x0000
0x5c != 0x00
AVRDUDE: verification error; content mismatch
AVRDUDE done. Thank you.