AVARICE - cannot sync

1 post / 0 new
Author
Message
#1
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

Hi! I tried setting up avarice, but it says it cannot sync... I have a JTAG clone, that works well from AVR studio, but only at 19200bps. Avarice is first trying to connect at 115200, maybe that screws up communication... Is there a way to tell avarice to connect only at 19200?


akos@fm12bq:~/projects/AVR/szekrenyzar$ avarice -d -j /dev/ttyUSB0 -1 -B250
AVaRICE version 2.9, Sep 19 2009 01:30:44

JTAG config starting.
Attempting synchronisation at bitrate 115200

command[S, 1]: 53 45 20 20 
Out of sync, reponse was `e0'

command[S, 1]: 53 20 20 
Out of sync, reponse was `e0'

command[S, 2]: 53 45 20 20 
Out of sync, reponse was `e0'

command[S, 1]: 53 20 20 
Out of sync, reponse was `e0'

command[S, 3]: 53 45 20 20 
Out of sync, reponse was `e0'

command[S, 1]: 53 20 20 
Out of sync, reponse was `e0'
Attempting synchronisation at bitrate 19200

command[S, 1]: 53 45 20 20 

command[S, 1]: 53 20 20 
response: 41 56 52 4E 4F 43 44 41 

command[B, 1]: 42 62 FF 20 20 
response: 41 

command[q, 1]: 71 7A 20 20 
Out of sync, reponse was `e0'

command[ , 2]: 20 
Out of sync, reponse was `e0'

command[ , 3]: 20 
Out of sync, reponse was `e0'

command[ , 4]: 20 
Out of sync, reponse was `e0'

command[ , 5]: 20 
Out of sync, reponse was `e0'

command[ , 6]: 20 
Out of sync, reponse was `e0'

command[ , 7]: 20 
Out of sync, reponse was `e0'

command[ , 8]: 20 
Out of sync, reponse was `e0'

command[ , 9]: 20 
Out of sync, reponse was `e0'

command[ , 10]: 20 
Out of sync, reponse was `e0'
JTAG ICE: Cannot synchronise

Regards,

axos88