AVaRICE 2.12 released

Log in or register to post comments
Go To Last Post
5 posts / 0 new
Author
Message
dl8dtl
dl8dtl's picture
Level: Raving Lunatic
Joined: Fri. Dec 20, 2002
Posts: 7506 View posts
Location: Dresden, Germany
#1
Posted by dl8dtl: Mon. Dec 12, 2011 - 09:25 PM
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

As nobody complained about the release candidate ;-), and all my own
tests were pretty successful, I released AVaRICE 2.12 today. The
Sourceforge mirrors should have picked the files up.

As with the release candidate, I found a Cygwin system to compile a
Win32 binary on. It can be found in the .zip file, while the .tar.bz2
file contains the source tarball (as usual).

The main differences to the release candidate are the addition of
Xmega debugging through PDI (on the JTAGICE mkII "” STK600 has not been
integrated yet, in case anyone would care), and I added the
ATxmega16D4 to the list of supported devices (which is a non-JTAG
PDI-only device). From a user's point of view (as well as from an
implementor's point of view), PDI debugging is completely abstracted
by the ICE, and very similar to JTAG debugging (fortunately).

http://sourceforge.net/projects/...

Jörg Wunsch

Please don't send me PMs, use email if you want to approach me personally.

Tags:

Tools, Compilers and General Programming, ATxmega16D4, ATmega16
Top
l3iggs
l3iggs's picture
Level: New Member
Joined: Sat. Jan 14, 2012
Posts: 1 View posts
Posted by l3iggs: Sat. Jan 14, 2012 - 09:00 PM
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

this is a great tool Jörg. thanks for your work. is it a big deal for you to enable Xmega debugging through PDI for the STK600?

Top
Gold Markclawson
clawson's picture
Level: Moderator
Joined: Mon. Jul 18, 2005
Posts: 102939 View posts
Location: (using avr-gcc in) Finchingfield, Essex, England
Posted by clawson: Sat. Jan 14, 2012 - 09:13 PM
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

Quote:

Xmega debugging through PDI for the STK600?

Since when has the STK600 been a debugger of any sort?!?

Top
dl8dtl
dl8dtl's picture
Level: Raving Lunatic
Joined: Fri. Dec 20, 2002
Posts: 7506 View posts
Location: Dresden, Germany
Posted by dl8dtl: Tue. Jan 17, 2012 - 09:22 AM
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

Integrating the STK600 into AVaRICE would be some work, due to the
different protocol. (Sigh, I wish they had chosen the same protocol
for all the tools, even though the old JTAGICEmkII one has some
additional overhead that's not strictly needed for a USB-only device.
Would have made many things much easier.)

That doesn't mean it's impossible, but unless there's some evidence
it could actually be used for debugging, I wuoldn't want to spend the
work.

The choice of the debugging backend (JTAG vs. PDI) is really secondary
then, the effort to spend is in the different communication path.

Jörg Wunsch

Please don't send me PMs, use email if you want to approach me personally.

Top
Brutte
Brutte's picture
Level: Raving Lunatic
Joined: Thu. Oct 5, 2006
Posts: 3229 View posts
Location: Poland
Posted by Brutte: Tue. Jan 17, 2012 - 05:33 PM
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

dl8dtl wrote:
but unless there's some evidence it could actually be used for debugging,

AFAIK no way:
https://www.avrfreaks.net/index.p...

No RSTDISBL, no fun!

Top