Does anyone know if the 2 comparator outputs on the ATSAMD1x can be routed to an IO pin.
The datasheet states on 31.6.10 p746:
The output of each comparator can be routed to an I/O pin by setting the Output bit group in the Comparator Control x
register (COMPCTRLx.OUT). This allows the comparator to be used by external circuitry. Either the raw, non-
synchronized output of the comparator or the CLK_AC-synchronized version, including filtering, can be used as the
I/O signal source. The output appears on the corresponding CMP[x] pin.
But the CMP[1:0] doesn't appear in the "I/O Multiplexing and Considerations" chapter.