I've been trying, without any success, to get the SAME54XPLAINED board to work with my SAM-ICE programmer. Programming it appears to work at first and the IDE says it is "Running", but pausing just causes things to hang. I have used the J-Link drivers/DLL that came with Atmel Studio 7.0.2389 along with the latest versions from Segger, still no luck. Any debug steps I could take would be greatly appreciated.
I also have a custom board that it does not work with, thought I would try it with a known good board first. The custom board and the Xplained board can be programmed uisng Atmel-ICE programmer without any issues. But I would like to use the SWO feature to avoid having to use a serial port if at all possible. Looks like Atmel-ICE does not really work with SWO, at least I can't find anything that says it does. If all else fails, I would like to use Segger's RTT with the SAM-ICE, which would give me the same capabilities.
Any suggestions or ideas would be greatly appreciated. Have wasted a couple of days on this already and have not made much progress.
Thanks in Advance!