Atmel Studio can not detect EDBG for debugging in SAM E70 Xplained evaluation kit

Log in or register to post comments
Go To Last Post
5 posts / 0 new
Author
Message
geweilin
geweilin's picture
Level: New Member
Joined: Tue. Sep 3, 2019
Posts: 3 View posts
#1
Posted by geweilin: Tue. Sep 3, 2019 - 04:05 AM
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

I bought a SAM E70 Xplained evaluation kit a few days ago, and I am trying to use it.
But when i click "Debug" -> "Start without debuggging", it shows a message box, says "Please select a connected tool and interface and try again" (attatchment 0.png)
And i'm sure that the correct device was selected (attatchment 1.png)
And there's no EDBG tool in tool list (can not detect) (attatchment 2.png)
But actually I can see the EDBG in the "Available Tools" Window (attatchment 3.png)
And I can also  see the EDBG in the "Device Programming" window, and it returns the right information (attatchment 4.png, 5.png)
The firmware of EDBG was upgraded to the lastest version 3.25
I was stucked on this problem, please help me.

Attachment(s): 

Image icon 0.png
Image icon 1.PNG
Image icon 2.png
Image icon 3.PNG
Image icon 4.png
Image icon 5.png

Tags:

Tools, Atmel Studio (ARM-related)
Top
meolsen
meolsen's picture
Level: Site Admin
Joined: Wed. Jul 27, 2011
Posts: 3799 View posts
Location: Microchip, Arizona
Posted by meolsen: Tue. Sep 3, 2019 - 04:20 AM
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

Your project is using a B Device, while the kit has a non-B device.
.
Change the device in your project and you should be good to go...

:: Morten

 

(yes, I work for Microchip, yes, I do this in my spare time, now stop sending PMs)

 

The postings on this site are my own and do not represent Microchip’s positions, strategies, or opinions.

Top
geweilin
geweilin's picture
Level: New Member
Joined: Tue. Sep 3, 2019
Posts: 3 View posts
Posted by geweilin: Tue. Sep 3, 2019 - 04:24 AM (Reply to #2)
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

Thank you！ meolsen， Thanks again.

It works OK now when the device is changed to ATSAME70Q21  (none-B).

Top
Revathi Murali
Revathi Murali's picture
Level: New Member
Joined: Mon. Feb 10, 2020
Posts: 5 View posts
Posted by Revathi Murali: Thu. Feb 27, 2020 - 04:49 AM (Reply to #2)
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

I have a similar issue. but even after changing the device its the same

 

Top
rutzzzz
rutzzzz's picture
Level: New Member
Joined: Thu. Aug 27, 2020
Posts: 4 View posts
Posted by rutzzzz: Thu. Aug 27, 2020 - 11:03 AM (Reply to #4)
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

same issue board is not detected by atmel studio 7.

<p>rutwik</p>

Top