Atmel Studio 7, System can't find path message during make

Go To Last Post
3 posts / 0 new
Author
Message
#1
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

Hello All !

I'm in the process of moving/migrating my projects from AS6.2 to AS7.

I normally use external makefile to build the projects.

So I copied the whole project/solution to the new AS7 project folder, and opened it in AS7.

Building seems to work fine and after programming the target everything works as expected.

However, after invoking the makefile I get two times the message that the system cannot find the referenced path.

Here is the start of the make output:

 

------ Build started: Project: CLASS_MIDI1, Configuration: Debug AVR ------
Build started.
Project "CLASS_MIDI1.cproj" (default targets):
Target "PreBuildEvent" skipped, due to false condition; ('$(PreBuildEvent)'!='') was evaluated as (''!='').
Target "CoreBuild" in file "D:\Apps\Atmel\Studio\7.0\Vs\Compiler.targets" from project "E:\Ablage\Projekte\AtmelStudio70\CLASS_MIDI1\CLASS_MIDI1\CLASS_MIDI1.cproj" (target "Build" depends on it):
    Task "RunCompilerTask"
        Shell Utils Path D:\Apps\Atmel\Studio\7.0\shellUtils
        D:\Apps\Atmel\Studio\7.0\shellUtils\make.exe -C "E:\Ablage\Projekte\AtmelStudio70\CLASS_MIDI1\CLASS_MIDI1" -f "makefile" all
        make: Entering directory 'E:/Ablage/Projekte/AtmelStudio70/CLASS_MIDI1/CLASS_MIDI1'
        Das System kann den angegebenen Pfad nicht finden.
        Das System kann den angegebenen Pfad nicht finden.

        ' [INFO]    :' Begin compilation of project \"MIDI\"...
        ""
        avr-gcc (AVR_8_bit_GNU_Toolchain_3.6.1_1750) 5.4.0
        Copyright (C) 2015 Free Software Foundation, Inc.
        This is free software; see the source for copying conditions.  There is NO
        warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
        ' [GCC]     :' Compiling C file \"MIDI.c\"

 

Does anyone have an idea what is causing this messages?

Any help or hint is highly appreciated.

I don't know if it is relevant, but this is a project built on LUFA.

makefile is attached.

 

Thanks a lot

 

 

  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

Studio 7 has several bugs.  I'm thinking of going back to 6.2.

 

Try running it from the admin account.  If that works, you need to delete the Studio stuff from "c:/users/" and then re-install.  I think there is a program you can run to do the deletes, that you can find a reference to in this forum.

 

Because your error message is not in English, and you are not using the C partition, I'm not sure this is your problem.

Last Edited: Tue. Apr 17, 2018 - 07:39 PM
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

steve17 wrote:
I think there is a program you can run to do the deletes, that you can find a reference to in this forum.
One of those programs is stated three posts after the following post :

Atmel Studio 7 clean (patch, delete, un-install, re-install)

Remove AS7 user data

by bentm

https://www.avrfreaks.net/forum/remove-as7-user-data

...

https://www.avrfreaks.net/forum/remove-as7-user-data#comment-2401206

IIRC, Revo Unstaller seems somewhat popular :

https://www.revouninstaller.com/

 

"Dare to be naïve." - Buckminster Fuller