AVR Freaks

Just going through making a custom cable for the ICE, I Though I would share the part numbers I used. 

I am doing a Atmega328PB Qtouch PTC project and want to program and allow Qdebug datastreaming with one cable. I created a custom 8 pin header on my pcb. 

Pin on the PCB       Pin on ICE AVR Port

1 - VCC                4

2 - GND               2

3 - RESET            6

4 - SCK               1

5 - MISO             3

6 - MOSI             9

7 - SS                 5

8 - NC                 -

PCB Header

https://www.digikey.ca/product-detail/en/sullins-connector-solutions/PRPC008SBAN-M71RC/S1111EC-08-ND/2775326

Cable to Header connector

https://www.digikey.ca/product-detail/en/te-connectivity-amp-connectors/5-103960-7/A123226-ND/2262199

Cable

https://www.digikey.ca/product-detail/en/3m/3749-10-100/3M156019-5-ND/5308215

Cable to AVR header connector

https://www.digikey.ca/product-detail/en/cnc-tech/3230-10-0101-00/1175-1645-ND/3883465

Hope that helps someone, crap webcam pic below.

Adam