In AT91SAM7S64 MCU corrupted the bootloader. How to program it with JTAG?
I have the Atmel-ICE, but Atmel Studio 7 does not support this microcontroller.
Atmel's sam-ba program should do it.
On the command "sam-ba --port help" sam-ba says: "Known ports: j-link serial".
On the command "sam-ba -p j-link -d help" sam-ba says: "Known devices: sam9xx5, sama5d2, sama5d3, sama5d4, samv7".
It turns out that sam-ba does not support either the Atmel-ICE or SAM7S64.
You probably got the wrong version. I was programming sam7x512s earlier this year - using a jlink device. Another option might be openocd - not sure if it supports atmel ice.
© 2020 Microchip Technology Inc.