ARM board

Go To Last Post
5 posts / 0 new
Author
Message
#1
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

 

Hi !

 

Can someone suggest me a board similar to :

 

http://www.acmesystems.it/arietta  or  http://www.acmesystems.it/aria

 

or clone

 

http://www.armdevs.com/CORE%209G25.html

 

 

 

Thank you !

 

 

  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

No answer other than to browse Atmel Third Party ARM :

http://www.atmel.com/about/contact/sales/default.aspx?contactType=Third%20Party%20Support%20-%20ARM#

IIRC Embest is through a major distributor.

SAMA5 is the follow-on to SAM9; SAMA5D4 has a package that may be a better match than SAMA5D3 (same pitch, fewer pins, 16-bit EBI data instead of 32-bit).

Crystalfontz - CFA-910 is EOL; it's a SoM that's now from an Atmel competitor.

Could look at this from the other end; iow select an OS or RTOS then by BSP would lead to SoM.

 

"Dare to be naïve." - Buckminster Fuller

  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

What, exactly, do you mean by "similar" ?

 

  • Size?
  • Processor?
  • Interfaces?
  • Linux?

 

What do you want to do with it?

 

Why are you asking about high-end ARM microprocessors on a low-end AVR microcontroller forum? 

 

Definitely more a topic for http://www.at91.com/ 

 

Top Tips:

  1. How to properly post source code - see: https://www.avrfreaks.net/comment... - also how to properly include images/pictures
  2. "Garbage" characters on a serial terminal are (almost?) invariably due to wrong baud rate - see: https://learn.sparkfun.com/tutorials/serial-communication
  3. Wrong baud rate is usually due to not running at the speed you thought; check by blinking a LED to see if you get the speed you expected
  4. Difference between a crystal, and a crystal oscillatorhttps://www.avrfreaks.net/comment...
  5. When your question is resolved, mark the solution: https://www.avrfreaks.net/comment...
  6. Beginner's "Getting Started" tips: https://www.avrfreaks.net/comment...
Last Edited: Sat. Apr 25, 2015 - 06:10 PM
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

 

We need to implement IEC 104 protocol for SCADA on it over Internet and later via GPRS.

 

How much memory and processor we need I don't know.

 

 

It's small, compact and price is OK for 8-layer board like Arietta.

 

Designing board would take too long and cost more. 

  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

xtal_88 wrote:
We need to implement IEC 104 protocol for SCADA on it over Internet and later via GPRS.

 

How much memory and processor we need I don't know.

SCADA can be done on an RTOS but much easier for reuse via Linux.

uClinux could be a possibility if power/current consumption is a concern.

xtal_88 wrote:
It's small, compact and price is OK for 8-layer board like Arietta.
Olimex was able to fit a Cortex-A onto a 6-layer PCB though their newer model is on an 8-layer PCB.

Olimex has some (few?) of their Cortex-A boards with an industrial temperature rating but by minimum-order-quantity (MOQ).

Olimex has four major global distributors and a lot of national or regional distributors.


Emcraft Systems

Linux for Cortex-M: STM32, LPC, Kinetis, and SmartFusion

http://www.emcraft.com/

Olimex on Wordpress

A20-OLinuXino-LIME2 review and updates

27 Oct 2014

https://olimex.wordpress.com/2014/10/27/a20-olinuxino-lime2-review-and-updates/

...

We increased the number of layers to 8 vs the 6 layers in LIME, ...

...

 

 

"Dare to be naïve." - Buckminster Fuller