Anyone recognise this connector?

Go To Last Post
6 posts / 0 new
Author
Message
#1
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

Anyone recognise this connector?

Attachment(s): 

#1 Hardware Problem? https://www.avrfreaks.net/forum/...

#2 Hardware Problem? Read AVR042.

#3 All grounds are not created equal

#4 Have you proved your chip is running at xxMHz?

#5 "If you think you need floating point to solve the problem then you don't understand the problem. If you really do need floating point then you have a problem you do not understand."

  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

You mean somebody besides me asks questions like this?

It looks like something from Molex.

If you don't know my whole story, keep your mouth shut.

If you know my whole story, you're an accomplice. Keep your mouth shut. 

  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

We use a 3-pin version of this connector with several of our products. I can look up the part number at work tomorrow, it's either Molex or Amp.

  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

I also am in favor of Molex.

http://www.molex.com/molex/products/family?key=mlx&channel=products&chanName=family&pageTitle=Introduction&parentKey=wire_to_board_connectors

first pictures on the molex site suggest it is MLX type. The link above points to that series.

but it might be a cheap chinese clone in the end....
regards

  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

Well looks like it's an Amp part 350777-1. Can't find the housing part number for the 2-pin part, the 3-pin housing is 641945-1

  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

Thanks guys, those look like the ones.

#1 Hardware Problem? https://www.avrfreaks.net/forum/...

#2 Hardware Problem? Read AVR042.

#3 All grounds are not created equal

#4 Have you proved your chip is running at xxMHz?

#5 "If you think you need floating point to solve the problem then you don't understand the problem. If you really do need floating point then you have a problem you do not understand."