I'm working with the atxmega256a3u device (well, really the atmega inside of ATZB-X0-256-3-0-C).
I'm using the Atmel Studio 6.2 beta
I've created a small A/D test program to measure the battery voltage and works. This program was defined by specifying a user board with the correct atxmega device. When I used the ASF Wizard to pull in the A/D driver, everything worked perfect.
So now I want to incorporate this test program into a program using the Lightweight mesh for RF stuff.
Now, when I use the ASF Wizard to pull in the A/D service, It seems to work ok - however, it is not the same one that is used in my test program. In fact, it has undeclared components in it that I can not resolve causing compiler errors. (These are not in the A/D driver from my test program)
Here are the undeclared items:
I'm assuming I have one of my symbols messed up, but they look ok to me.
and a few needed for the light weight mesh.
Does anyone know how the asf wizard gets it's header files from or how to control which version of the code gets pulled in?