Atmel Studio 6 November 2012 SP2 version download issue

Log in or register to post comments
Go To Last Post
13 posts / 0 new
Author
Message
TheCryptoman
TheCryptoman's picture
Level: Wannabe
Joined: Thu. Aug 16, 2012
Posts: 68 View posts
#1
Posted by TheCryptoman: Thu. Dec 20, 2012 - 12:07 PM
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

Hi,

I have been trying to download the following release for the last 2 days.

"Atmel Studio 6.0 with Service Pack 2 (build 1996) Installer"

The link to the page I have been using is as follows:
http://www.atmel.com/tools/atmel...

The download commences fine and it progresses normally until about 300 MB of the 584 MB file is received. Then I get an error saying that the data cannot be read from the source. It appears as if the server times out in the middle of the download.

I have tried this download from 2 different PC and various IP addresses but the result has not changed.

Has anyone else got this error? Is there any suggestions on this?

Regards...

Tags:

Tools, Atmel Studio (AVR-related)
Top
meolsen
meolsen's picture
Level: Site Admin
Joined: Wed. Jul 27, 2011
Posts: 3630 View posts
Location: Microchip, Arizona
Posted by meolsen: Thu. Dec 20, 2012 - 12:37 PM
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

I'm also getting this error (in addition to appalling speeds).

I'm going to bump the webteam

:: Morten

 

(yes, I work for Atmel, yes, I do this in my spare time, now stop sending PMs)

 

The postings on this site are my own and do not represent Microchip’s positions, strategies, or opinions.

Top
Svuppe
Svuppe's picture
Level: Hangaround
Joined: Mon. Jul 23, 2001
Posts: 301 View posts
Location: Copenhagen, Denmark
Posted by Svuppe: Thu. Dec 20, 2012 - 04:37 PM
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

Consider yourself lucky getting 300 MB. I never get past 6 MB before the connection grinds to a halt, and eventually breaks. And resuming a download doesn't appear to work, so it is back to square one every time.

Top
sbennett
sbennett's picture
Level: Posting Freak
Joined: Mon. Nov 19, 2001
Posts: 1199 View posts
Location: San Luis Obispo, California
Posted by sbennett: Thu. Dec 20, 2012 - 07:05 PM
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

Somewhat related -

I have to wonder how many, if any, successful downloads of the 6.7 GB AVR Technical Library (DVD) have occurred.

I was rebuffed when requesting the Atmel store to make it available on disk.

Stan

Top
TheCryptoman
TheCryptoman's picture
Level: Wannabe
Joined: Thu. Aug 16, 2012
Posts: 68 View posts
Posted by TheCryptoman: Thu. Dec 20, 2012 - 09:09 PM
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

I didn't try the AVR Technical Library DVD download at all. 6.7 GB sounds a bit too far fetched given my current download issue. I am still taking baby steps to get this sorted. :)

Regards...

Top
meolsen
meolsen's picture
Level: Site Admin
Joined: Wed. Jul 27, 2011
Posts: 3630 View posts
Location: Microchip, Arizona
Posted by meolsen: Fri. Dec 21, 2012 - 10:45 PM
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

the download server that malfunctioned has been fixed, and the downloads should be working again

:: Morten

 

(yes, I work for Atmel, yes, I do this in my spare time, now stop sending PMs)

 

The postings on this site are my own and do not represent Microchip’s positions, strategies, or opinions.

Top
Bronze MarkJohanEkdahl
JohanEkdahl's picture
Level: 10k+ Postman
Joined: Wed. Mar 27, 2002
Posts: 26988 View posts
Location: Lund, Sweden
Posted by JohanEkdahl: Sat. Dec 22, 2012 - 10:34 AM
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

Quote:

the download server that malfunctioned has been fixed

There was a fatal crack in the "Yakety Sax" record and there was some spare time to fix the server before the replacement record arrived? :wink:

The double-irony of-course is that I get CAPTCHA'd for posting this..

As of January 15, 2018, Site fix-up work has begun! Now do your part and report any bugs or deficiencies here. 

No guarantees, but if we don't report problems they won't get much of  a chance to be fixed! Details/discussions at link given just above.

 

"Some questions have no answers."[C Baird] "There comes a point where the spoon-feeding has to stop and the independent thinking has to start." [C Lawson] "There are always ways to disagree, without being disagreeable."[E Weddington] "Words represent concepts. Use the wrong words, communicate the wrong concept." [J Morin] "Persistence only goes so far if you set yourself up for failure." [Kartman]

Top
TheCryptoman
TheCryptoman's picture
Level: Wannabe
Joined: Thu. Aug 16, 2012
Posts: 68 View posts
Posted by TheCryptoman: Sat. Dec 22, 2012 - 11:50 AM
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

I just tried to download the installer. The problem has been resolved. I will now install AS6.

Thanks.

Top
Svuppe
Svuppe's picture
Level: Hangaround
Joined: Mon. Jul 23, 2001
Posts: 301 View posts
Location: Copenhagen, Denmark
Posted by Svuppe: Sat. Dec 22, 2012 - 02:08 PM
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

Thank you very much.
The speed isn't something to write home about, but it is coming along steadily now. We'll see if I get the entire file in a couple of hours.

Top
meolsen
meolsen's picture
Level: Site Admin
Joined: Wed. Jul 27, 2011
Posts: 3630 View posts
Location: Microchip, Arizona
Posted by meolsen: Sat. Dec 22, 2012 - 02:09 PM
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

JohanEkdahl wrote:
Quote:

the download server that malfunctioned has been fixed

There was a fatal crack in the "Yakety Sax" record and there was some spare time to fix the server before the replacement record arrived? :wink:

The double-ony of-course is that I get CAPTCHA'd for posting this..

I would say most of the surprise was that I got a response in days... It looks to me like they are working on single sign on, as last time I tried to download studio from the Web I used my Atmel Gallery login...

:: Morten

 

(yes, I work for Atmel, yes, I do this in my spare time, now stop sending PMs)

 

The postings on this site are my own and do not represent Microchip’s positions, strategies, or opinions.

Top
abcminiuser
abcminiuser's picture
Level: Raving Lunatic
Joined: Fri. Jan 23, 2004
Posts: 9856 View posts
Location: Melbourne, Australia
Posted by abcminiuser: Sun. Dec 23, 2012 - 04:39 AM
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

Quote:

I would say most of the surprise was that I got a response in days...

You still get responses? Can you ask them about the CAPTCHA then, since they seem to auto-delete my messages?

- Dean :twisted:

Make Atmel Studio better with my free extensions. Open source and feedback welcome!

Top
meolsen
meolsen's picture
Level: Site Admin
Joined: Wed. Jul 27, 2011
Posts: 3630 View posts
Location: Microchip, Arizona
Posted by meolsen: Sun. Dec 23, 2012 - 12:05 PM
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

abcminiuser wrote:
Quote:

I would say most of the surprise was that I got a response in days...

You still get responses? Can you ask them about the CAPTCHA then, since they seem to auto-delete my messages?

- Dean :twisted:

Mwahaha :P

:: Morten

 

(yes, I work for Atmel, yes, I do this in my spare time, now stop sending PMs)

 

The postings on this site are my own and do not represent Microchip’s positions, strategies, or opinions.

Top
Bronze MarkJohanEkdahl
JohanEkdahl's picture
Level: 10k+ Postman
Joined: Wed. Mar 27, 2002
Posts: 26988 View posts
Location: Lund, Sweden
Posted by JohanEkdahl: Tue. Dec 25, 2012 - 08:50 AM
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

abcminiuser wrote:
Quote:

I would say most of the surprise was that I got a response in days...

You still get responses? Can you ask them about the CAPTCHA then, since they seem to auto-delete my messages?

- Dean :twisted:

That bad, huh?

As of January 15, 2018, Site fix-up work has begun! Now do your part and report any bugs or deficiencies here. 

No guarantees, but if we don't report problems they won't get much of  a chance to be fixed! Details/discussions at link given just above.

 

"Some questions have no answers."[C Baird] "There comes a point where the spoon-feeding has to stop and the independent thinking has to start." [C Lawson] "There are always ways to disagree, without being disagreeable."[E Weddington] "Words represent concepts. Use the wrong words, communicate the wrong concept." [J Morin] "Persistence only goes so far if you set yourself up for failure." [Kartman]

Top