I'm trying to start my timer1 in the ATTiny45, I'm using in my current project.
However, when simulating, I can't get the timer started.
The processor is running on the internal 8MHz RC oscillator with no prescale.
Here's the code that I'm using:
//TIMER1 SET-UP TCCR1=0x00; PLLCSR=0x00; TIMSK|=0x06; //Timer0 and timer1 overflow enable set. TCCR1=0x01;
This should be straightforward, but I must be missing something...
What did I do wrong?