Avrdude: usbdev_open() did not find any USB device "usb

Log in or register to post comments
Go To Last Post
4 posts / 0 new
Author
Message
Bronze Markdavid.prentice
david.prentice's picture
Level: 10k+ Postman
Joined: Sat. Feb 12, 2005
Posts: 30447 View posts
Location: Wormshill, England
#1
Posted by david.prentice: Thu. May 21, 2009 - 01:44 PM
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

I can connect and program JTAG devices using my JTAGICE-mk2 via Studio4 or CodeVision.

But when I try to use:

 avrdude -p m128 -c jtagmkii -v -P usb

I just get an error: Avrdude: usbdev_open() did not find any USB device "usb"
I have also tried (serial# is 00B00000346F):

 avrdude -p m128 -c jtagmkii -v -P usb:34:6f

I have no trouble with a mk1 clone on usb (appears as com6):

 avrdude -p m128 -c jtagmki -v -P com6

I have been messing around with LUFA devices, and I do not know whether I may have upset some registry.

avrdude is version 5.6cvs

The JTAG2 seems fine for debugging via Studio.

David.

Tags:

Tools, Compilers and General Programming
Top
Gold Markclawson
clawson's picture
Level: Moderator
Joined: Mon. Jul 18, 2005
Posts: 101073 View posts
Location: (using avr-gcc in) Finchingfield, Essex, England
Posted by clawson: Thu. May 21, 2009 - 02:23 PM
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

David,

That sounds an awful lot like this:

https://www.avrfreaks.net/index.p...

Cliff

Top
Bronze Markdavid.prentice
david.prentice's picture
Level: 10k+ Postman
Joined: Sat. Feb 12, 2005
Posts: 30447 View posts
Location: Wormshill, England
Posted by david.prentice: Thu. May 21, 2009 - 03:59 PM
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

So avrdude can only access the JTAG-2 via a different driver to Studio.

I have made several attempts to uninstall the Jungo driver and install the JTAG-2 driver in the libusb/bin/ directory. It still seems to load the Jungo driver.

So I have come to the conclusion that since any debugging will be via Studio, I may just as well keep the Studio Jungo drivers and forget about avrdude.

I can always use jtagiceii.exe for programming most chips. My jtagiceii.exe will not do the xmega chips. However Studio will program the xmega using the JTAG-2 hardware.
Avrdude claims to program the xmega, but I will just have to use Studio.

CodeVision will compile for an xmega but not program it.

I presume that I will just have to wait for a revision of jtagiceii.exe that will understand the xmega.

David.

Top
kangaeby
kangaeby's picture
Level: New Member
Joined: Sun. Aug 2, 2009
Posts: 2 View posts
Posted by kangaeby: Sun. Aug 2, 2009 - 01:42 PM
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

referto this link and download the libusb-win32 and install it, avrdude will find your programmer and serial number

http://www.mail-archive.com/avr-...

Top