Shameless Plug

Go To Last Post
6 posts / 0 new
Author
Message
#1
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

Hey all,

I am looking for the following connector:

 

https://www.amazon.com/QSC-CO-00...

 

I need two of these.  I am scouring the Phoenix Contact website looking for the device, but as always, their search has always been a very slow go, so I am hoping someone here might recognise the part and have an idea of a part number.

 

YES, it is for a QSC CX-108 amplifier.

 

YES, the title of the thread was to get you to read it cheekydevil

 

Any help is appreciated

 

JIm

I would rather attempt something great and fail, than attempt nothing and succeed - Fortune Cookie

 

"The critical shortage here is not stuff, but time." - Johan Ekdahl

 

"Step N is required before you can do step N+1!" - ka7ehk

 

"If you want a career with a known path - become an undertaker. Dead people don't sue!" - Kartman

"Why is there a "Highway to Hell" and only a "Stairway to Heaven"? A prediction of the expected traffic load?"  - Lee "theusch"

 

Speak sweetly. It makes your words easier to digest when at a later date you have to eat them ;-)  - Source Unknown

Please Read: Code-of-Conduct

Atmel Studio6.2/AS7, DipTrace, Quartus, MPLAB, RSLogix user

  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

This will get the solder ball rolling

 

https://www.westfloridacomponent...

 

This might not have the flat thin slot on the "fingers"...can't say

 

actually , none of the Phoenix seem to have the raised ridge around the screw holes

 

When in the dark remember-the future looks brighter than ever.   I look forward to being able to predict the future!

Last Edited: Sat. May 7, 2022 - 02:33 AM
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0


 

 

Winner ...you can take over search from here...the slotted type is very hard to find, or at least to see, since they almost never show that view.

 

check these---some flavors hat might meet your needs...next up fined the same part for $3

 

When in the dark remember-the future looks brighter than ever.   I look forward to being able to predict the future!

Last Edited: Sat. May 7, 2022 - 03:29 AM
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

Thnaks!  Oddly enough, I looked at the PC5 part and nixed it because the 3D model showed holes instead of slots for the contacts.

 

Thanks again.  Will look at the distributors for pricing

 

JIm

I would rather attempt something great and fail, than attempt nothing and succeed - Fortune Cookie

 

"The critical shortage here is not stuff, but time." - Johan Ekdahl

 

"Step N is required before you can do step N+1!" - ka7ehk

 

"If you want a career with a known path - become an undertaker. Dead people don't sue!" - Kartman

"Why is there a "Highway to Hell" and only a "Stairway to Heaven"? A prediction of the expected traffic load?"  - Lee "theusch"

 

Speak sweetly. It makes your words easier to digest when at a later date you have to eat them ;-)  - Source Unknown

Please Read: Code-of-Conduct

Atmel Studio6.2/AS7, DipTrace, Quartus, MPLAB, RSLogix user

  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

 I looked at the PC5 part and nixed it because the 3D model 

I did too...then saw this one, unfortunately they tend to hide the needed view.

 

I'd def get one for verification before ordering multiple pieces...they have auto-generated datasheets, so things can go quite awry... and the wrong image can be on the website.

https://www.mouser.com/datasheet...

They don't give a lot of clarity about that thin slot & not sure how much to trust their auto-generated datasheet...maybe a quick email/call is in  order.

 

 

When in the dark remember-the future looks brighter than ever.   I look forward to being able to predict the future!

  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

avrcandies wrote:

I'd def get one for verification before ordering multiple pieces...

 

Seconded.  I've been burnt by things like that being 'just slightly incompatible' before.  Sometimes brute force and ignorance can make them fit, but it's not exactly an elegant solution.  S.