I've spend 2 days trying to get the FatFs module working on my ATMega32U4 and i am slowly giving up.
I thought i was golden when i found the kubark42 tutorial until i've tried 2 times to configure it and given up because the tutorial is +10 years old and a lot of stuff have happened since.
I've teared down the ffsample to the minimum but still no success.
Tried other peoples code with no success
To clear out some of my possible woopsies
Internal pullup on MISO is enabled
I have a 3V3 level converter on the PCB
I am running 5V on MCU so it can do 16MHz
I have sat down and (tried) to configure the libraries but it is not easy specially with all the outdated tutorials and the much existing confusion around the 100 threads or so.
It could surely be something related to all these st***d macros there is in the library but im not really sure..
I have attached the Atmel studio project to the post for those who have the balls to check it.
It is a mess and im sorry but at this point im not even sure about what I need or not