Thanks Jim - one of the hold backs for me is that I've got 8 bytes in the configuration for the fuses/lock bits and I think the part I was looking at for UPDI had like 10 or more. I suppose I should have made this area dynamic in my configuration or left some room to expand into. I think I had some room and already used it. The short of it is that I will have to make a configuration change which will make a new APC file format that is incompatible this the previous version. One thing turns into another! Still, I would like to add UPDI support, so I just need to fit it in with my other projects.
Hello, I'm from Brasil SP I would like to buy some.
I think we got teh point with the 5 times you posted teh same thing.
I will message Alan in case he missed your calling card.
I would rather attempt something great and fail, than attempt nothing and succeed - Fortune Cookie
"The critical shortage here is not stuff, but time." - Johan Ekdahl
"Step N is required before you can do step N+1!" - ka7ehk
"If you want a career with a known path - become an undertaker. Dead people don't sue!" - Kartman
"Why is there a "Highway to Hell" and only a "Stairway to Heaven"? A prediction of the expected traffic load?" - Lee "theusch"
Speak sweetly. It makes your words easier to digest when at a later date you have to eat them ;-) - Source Unknown
Please Read: Code-of-Conduct
Atmel Studio6.2/AS7, DipTrace, Quartus, MPLAB, RSLogix user
Thanks Jim; will send him a PM.
Please provide a link to purchase a programmer.
Sending a PM in just a moment mowades.
Hi Alan - I would like Five more of these. Can I get your email I seem to have lost it.
OK, there are lots of these ,,, just an UNO, or tiny version with one pin used as a UPDI interface. But I need a device to program ATtiny devices that have been coded/compiled with Microchip MPLABX. So the output is a HEX file, and some kind of smart PC application is needed that understands the flash page size of the various tiny devices, so can issue the erase-page, write-page commands as needed to transfer this to the UNO -> UPDI interface. The UPDI command management therefore needs to be in the PC app so it is flexible enough to handle ALL the existing-and-future UPDI devices, and the UNO would just provide the kind-of-simple serialization and bi-directional hardware link layer that is needed. Does anyone provide such a PC app?
Alank2 has a lrogrammer and PC app. Go to the top of this thread to get the link.
edit…corrected autocorrect eff up
Ampertronics Pty. Ltd.
* Electronic Design * Custom Products * Contract Assembly
damned autocorrect on my mobile…..
Does what I need and a lot more. Thanks for the reference.
© 2021 Microchip Technology Inc.