We are in URGENT need for a local contact in France, that is willing to visit the Chantillac area (in Western France) urgently to reprogram an ATxmega128A1 that has been bricked in the field. This is an industrial machine that is typically internet connected. All support will be provided via phone to complete the job. The requirements are:
1. Have an xmega programmer available to program via the 6-pin PDI interface, such as the ATATMEL-ICE: https://www.digikey.com/en/produ...
2. Can speak a level of English to be able to receive instructions over the phone
3. Have a laptop or access to one so we can use Microchip Studio (Atmel Studio)
We need this support in the next few days, so if you are in the area and have the tool, or know somebody that is, I would very much appreciate your help. Note that this is PAID WORK and should only take a few hours plus travel time. I fully expect to pay a good rate for this work, so even if you do not have much experience, if you have the tool or know a friend that does, please contact me ASAP.
Hoping for help,