programmer for ATSAMD11 [ATMEL-ICE supports ATSAMD11 through SWD]

Log in or register to post comments
Go To Last Post
8 posts / 0 new
Author
Message
Xiao
Xiao's picture
Level: Hangaround
Joined: Thu. Apr 6, 2017
Posts: 132 View posts
#1
Posted by Xiao: Thu. Apr 23, 2020 - 09:12 AM
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

I thought my ATMEL-ICE can work as programmer for ATSAMD11D14,

But there is no ATSAMD11 in the supported device list  in ATMEL studio.

 

I have looked through the pages for ATMEL-ICE & ATSAMD11D14 in microchip.com.

ATMEL-ICE : support all SAM ARM Cortex-M device.

ATSAMD11D14 :  based on ARM Cortex-M0+

It looks like ICE should be ok.

 

I just want to burn the code into D11,don't debug.

Anyone knows ?

Tags:

Atmel SMART ARM-based MCUs and MPUs, Atmel Cortex-M MCUs
Last Edited: Mon. Apr 27, 2020 - 03:55 AM
Top
meolsen
meolsen's picture
Level: Site Admin
Joined: Wed. Jul 27, 2011
Posts: 3820 View posts
Location: Microchip, Arizona
Posted by meolsen: Thu. Apr 23, 2020 - 12:41 PM
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 1

Atmel-ICE supports SAMD11.
.
Did you not install ARM support in Studio when you installed it? (I.e do you have any other ARM devices in your list)

:: Morten

 

(yes, I work for Microchip, yes, I do this in my spare time, now stop sending PMs)

 

The postings on this site are my own and do not represent Microchip’s positions, strategies, or opinions.

Top
Xiao
Xiao's picture
Level: Hangaround
Joined: Thu. Apr 6, 2017
Posts: 132 View posts
Posted by Xiao: Thu. Apr 23, 2020 - 01:36 PM (Reply to #2)
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

You are right, I didn’t add the DFP.
Atmel studio shows “don’t detect the device “.
Maybe the connection is not right.
Could you please confirm for me: atmel-ice can programme the atsamd11 or not?
Thank you.

Last Edited: Thu. Apr 23, 2020 - 01:38 PM
Top
meolsen
meolsen's picture
Level: Site Admin
Joined: Wed. Jul 27, 2011
Posts: 3820 View posts
Location: Microchip, Arizona
Posted by meolsen: Thu. Apr 23, 2020 - 02:00 PM
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

First sentence in my answer...

:: Morten

 

(yes, I work for Microchip, yes, I do this in my spare time, now stop sending PMs)

 

The postings on this site are my own and do not represent Microchip’s positions, strategies, or opinions.

Top
Xiao
Xiao's picture
Level: Hangaround
Joined: Thu. Apr 6, 2017
Posts: 132 View posts
Posted by Xiao: Fri. Apr 24, 2020 - 12:04 AM (Reply to #4)
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

：）

Top
Xiao
Xiao's picture
Level: Hangaround
Joined: Thu. Apr 6, 2017
Posts: 132 View posts
Posted by Xiao: Sat. Apr 25, 2020 - 03:14 AM (Reply to #4)
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0


meolsen:

What does this mean?

 

Top
meolsen
meolsen's picture
Level: Site Admin
Joined: Wed. Jul 27, 2011
Posts: 3820 View posts
Location: Microchip, Arizona
Posted by meolsen: Sat. Apr 25, 2020 - 12:35 PM
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

That the Atmel-ICE cannot find any device ... Check connection, power and clock to the chip...

:: Morten

 

(yes, I work for Microchip, yes, I do this in my spare time, now stop sending PMs)

 

The postings on this site are my own and do not represent Microchip’s positions, strategies, or opinions.

Top
Xiao
Xiao's picture
Level: Hangaround
Joined: Thu. Apr 6, 2017
Posts: 132 View posts
Posted by Xiao: Mon. Apr 27, 2020 - 03:54 AM
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

update information for reference.

 

The connection is right.

But,

1) the soldering for GND is not solid.

2) the circuit of reset pin is WRONG, the hardware engineer connected it to GND, pull low for default.

 

Now,have burned the MuxTO to D11.

 

Thank you! meolsen.

Top