Device programming with AVR Dragon not found ATmega1609?

Log in or register to post comments
Go To Last Post
7 posts / 0 new
Author
Message
gproduct
gproduct's picture
Level: Wannabe
Joined: Thu. Sep 3, 2015
Posts: 78 View posts
#1
Posted by gproduct: Sat. Aug 31, 2019 - 03:29 PM
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

HI everybody.

 

I have a board with a ATmega1609. I have installed the package needed for it to compile in atmel studio, but when I open up the Device Programming section and select my AVR Dragon I can't find the ATmega1609. Do I need to install another package of some sort? Do I need another programmer?

 

Cheers!

Code is everything, code is life :D
 

Tags:

Tools, Atmel Studio (AVR-related), atmega1609
Top
gchapman
gchapman's picture
Level: 10k+ Postman
Joined: Tue. Jan 9, 2007
Posts: 14820 View posts
Location: Clay County, Texas, u.S.A.
Posted by gchapman: Sat. Aug 31, 2019 - 04:42 PM
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

gproduct wrote:
Do I need another programmer?
Yes

ATMEGA1609 - 8-bit Microcontrollers (Development Environment tab, Programmers button)

Atmel ICE - preferred for AVR

MPLAB PICkit 4 - set it to EDBG by selecting a former Atmel MCU in MPLAB X or MPLAB X IPE; it's not tested for mega1609 in MPLAB X v5.25 (is tested for mega3209 and mega4809) though will likely be functional.

MPLAB Snap - tested for a significant number of PIC

 

"Dare to be naïve." - Buckminster Fuller

Top
gproduct
gproduct's picture
Level: Wannabe
Joined: Thu. Sep 3, 2015
Posts: 78 View posts
Posted by gproduct: Sat. Aug 31, 2019 - 04:55 PM
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

gchapman wrote:

gproduct wrote:
Do I need another programmer?
Yes

ATMEGA1609 - 8-bit Microcontrollers (Development Environment tab, Programmers button)

Atmel ICE - preferred for AVR

MPLAB PICkit 4 - set it to EDBG by selecting a former Atmel MCU in MPLAB X or MPLAB X IPE; it's not tested for mega1609 in MPLAB X v5.25 (is tested for mega3209 and mega4809) though will likely be functional.

MPLAB Snap - tested for a significant number of PIC

 

 

Yeah just realized it myself with research, good thing the UDPI pin is exposed.

 

I can't really get to any of those programmers, but can this work? https://github.com/ElTangas/STK2...

Code is everything, code is life :D
 

Top
gchapman
gchapman's picture
Level: 10k+ Postman
Joined: Tue. Jan 9, 2007
Posts: 14820 View posts
Location: Clay County, Texas, u.S.A.
Posted by gchapman: Sat. Aug 31, 2019 - 05:01 PM (Reply to #3)
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

Yes

 

"Dare to be naïve." - Buckminster Fuller

Top
gproduct
gproduct's picture
Level: Wannabe
Joined: Thu. Sep 3, 2015
Posts: 78 View posts
Posted by gproduct: Sat. Aug 31, 2019 - 05:27 PM
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

gchapman wrote:

Yes

 

 

Alright thanks!

Code is everything, code is life :D
 

Top
El Tangas
El Tangas's picture
Level: Raving Lunatic
Joined: Thu. Jul 14, 2016
Posts: 3517 View posts
Posted by El Tangas: Sat. Aug 31, 2019 - 11:23 PM
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 1

gproduct wrote:
I can't really get to any of those programmers, but can this work? https://github.com/ElTangas/STK2...

 

Unfortunately, no, it just works with the tiny AVR-0/1 series, not the mega. This is because it has some hardcoded values unsuitable for the mega series.

This program is mostly an hack, and I'm not actively developing it anymore.

 

If you want a "free" programmer, I highly recommend that you use one of these instead:

jtag2updi - a development of the previous program. It uses avrdude to do most of the hard work - https://github.com/ElTangas/jtag...

PyUPDI - written by mraardvark from Atmel/Microchip - https://github.com/mraardvark/py...

 

Problem is, you will need to configure Studio to use external tools.

 

edit: I think pyupdi is not yet updated to work with the mega1609, but I'm sure if you request it to mraardvark it will be updated easily.

Last Edited: Sat. Aug 31, 2019 - 11:26 PM
Top
gchapman
gchapman's picture
Level: 10k+ Postman
Joined: Tue. Jan 9, 2007
Posts: 14820 View posts
Location: Clay County, Texas, u.S.A.
Posted by gchapman: Sun. Sep 1, 2019 - 02:01 PM (Reply to #6)
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

El Tangas wrote:
Problem is, you will need to configure Studio to use external tools.
Arduino to Atmel Studio 7 external programmers, ISP and serial programming | AVR Freaks

 

"Dare to be naïve." - Buckminster Fuller

Top