AVRfreaks Design Notes Wanted

Go To Last Post
24 posts / 0 new
Author
Message
#1
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 1

I've just posted what Design Notes I have over in tutorials but there are a few missing.

 

If anyone has...

 

DN_012

DN_013

DN_015 <- Just this one to find

DN_023

 

...it would be great to restore the whole collection.

 

(and the old site is still down)

#1 This forum helps those that help themselves

#2 All grounds are not created equal

#3 How have you proved that your chip is running at xxMHz?

#4 "If you think you need floating point to solve the problem then you don't understand the problem. If you really do need floating point then you have a problem you do not understand." - Heater's ex-boss

Last Edited: Wed. Feb 20, 2019 - 11:03 PM
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

[edit] removed my own dirty loundry from this thread[/edit]

Doing magic with a USD 7 Logic Analyser: https://www.avrfreaks.net/comment/2421756#comment-2421756

Bunch of old projects with AVR's: http://www.hoevendesign.com

Last Edited: Mon. Feb 4, 2019 - 02:00 PM
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

I found DN012 buried on the archive.org wayback machine in a folder of 2117 tool files/links for 2005 and earlier, searched extensively as I could, pdf files for the other three above were not apparent.

 

DN012   Writing the Calibration Byte to the OSCCAL Register in ImageCraft ICCtiny (attached)

 

Stan

Attachment(s): 

Last Edited: Sun. Feb 3, 2019 - 02:13 AM
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

Stan, what url did you submit to wayback?

 

Rick

  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

"Experience is what enables you to recognise a mistake the second time you make it."

"Good judgement comes from experience.  Experience comes from bad judgement."

"Wisdom is always wont to arrive late, and to be a little approximate on first possession."

"When you hear hoofbeats, think horses, not unicorns."

"Fast.  Cheap.  Good.  Pick two."

"We see a lot of arses on handlebars around here." - [J Ekdahl]

 

  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

Rick,

 

Attached is a spreadsheet of what I gathered from the wayback machine. It lists 2117 files/links for the AVR Freaks tools section for the year 2005 found at link   web.archive.org/web/*/https://www.avrfreaks.net/Tools/*

 

I don't recall how I got there, couldn't figure how to duplicate it for information newer than 2005. In the spreadsheet right column I added title information found when viewing the content from the link. Dates beyond 2005 are suspect. The design notes 1 through 48 correspond to Tool ID's between 232 to 411 associated with php for captures prior to 2005. In 2005 the "Tool ID" and php are gone for a new series of captures. There are some pdf files in the group of 2117, where I found DN012. When viewing the linked pages none of the download file links work.

 

Stan

 

Attachment(s): 

  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

Found DN013 in my "Archive"

 

 

/Bingo

Attachment(s): 

  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

Found DN013 in my "Archive"

I've added it to the .zip here:

https://www.avrfreaks.net/comment/2631346#comment-2631346

"Experience is what enables you to recognise a mistake the second time you make it."

"Good judgement comes from experience.  Experience comes from bad judgement."

"Wisdom is always wont to arrive late, and to be a little approximate on first possession."

"When you hear hoofbeats, think horses, not unicorns."

"Fast.  Cheap.  Good.  Pick two."

"We see a lot of arses on handlebars around here." - [J Ekdahl]

 

  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

sbennett wrote:

I found DN012 buried on the archive.org wayback machine in a folder of 2117 tool files/links for 2005 and earlier, searched extensively as I could, pdf files for the other three above were not apparent.

 

Thanks, I've added it to my Tutorials post.

#1 This forum helps those that help themselves

#2 All grounds are not created equal

#3 How have you proved that your chip is running at xxMHz?

#4 "If you think you need floating point to solve the problem then you don't understand the problem. If you really do need floating point then you have a problem you do not understand." - Heater's ex-boss

  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

Bingo600 wrote:

Found DN013 in my "Archive"

 

Thanks, added to my Tutorials post.

#1 This forum helps those that help themselves

#2 All grounds are not created equal

#3 How have you proved that your chip is running at xxMHz?

#4 "If you think you need floating point to solve the problem then you don't understand the problem. If you really do need floating point then you have a problem you do not understand." - Heater's ex-boss

  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

You guys are so cool.

  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

I got an email that paulvdh has added a bunch of stuff to this thread, but it is not showing up.  I'm confused (nothing new there).

  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

MarkThomas wrote:
I got an email that paulvdh has added a bunch of stuff to this thread, but it is not showing up. I'm confused (nothing new there).

 

In post #2 above, Paulvdh had a lengthy list of odd files, edited out just four hours prior to your comment.

  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

 

Under what heading on the orig. forum site were the design notes found?

 

Rick

  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

Early on in AVR Feaks selecting Tools on the menu bar will take you to a menu page with design notes listed or later on where you had to select Tool Tree from a menu bar. It may look like you've hit the jackpot, but the underlying links go nowhere.

 




Last Edited: Mon. Feb 4, 2019 - 09:25 PM
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

I have DN_015 and DN_023

Where to upload them ?
Does a simple attach to a message is ok ?

Sorry guys, long timeout of the forums...

 

  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

Ntano wrote:
Does a simple attach to a message is ok ?
I'd say yes.  Then OP can add it to his other thread.

"Experience is what enables you to recognise a mistake the second time you make it."

"Good judgement comes from experience.  Experience comes from bad judgement."

"Wisdom is always wont to arrive late, and to be a little approximate on first possession."

"When you hear hoofbeats, think horses, not unicorns."

"Fast.  Cheap.  Good.  Pick two."

"We see a lot of arses on handlebars around here." - [J Ekdahl]

 

  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

Ok. Attach it is.

If any other is missing let me know,

I have all the others also (1 to 48)

i don't know if any newer exist, not i looked..

Attachment(s): 

  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0


MarkThomas wrote:
I got an email that paulvdh has added a bunch of stuff to this thread, but it is not showing up.  I'm confused (nothing new there).
The information posted was a lengthy directory listing of mostly random stuff I collected over the last 15 years from various sources overt the 'net related to AVR. The info (Over 800MB) varies from Atmel AN's to zipped archives of projects from total strangers.

 

I looked a bit through them (Gosh, I forgot I even had most of that stuff), did not find any of the missing DN's, and I also looked through the titles of the missing DN's and did not find much overlap with my personal interests and therefore the chance of me archiving them was very slim. Because of the unknown origin of some of these projects (even to me) and because it seemed to add more noise then usefull info to this tread I decided to remove the listing after a few days.

 

All together I'm quite the horder:

28GB of data in the "electronics" subdir. (Including several thousands of datasheets).

60GB of data in the "projects" subdir wich is self generated data intertwined with more focussed data from the 'net about various subjects.

 

I'll treat y'all on a random picture of a propperly crimped connector:

 

 

Doing magic with a USD 7 Logic Analyser: https://www.avrfreaks.net/comment/2421756#comment-2421756

Bunch of old projects with AVR's: http://www.hoevendesign.com

  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

Ntano wrote:
DN_015.PDF
Seems to be corrupted.  Can open in none of:

  • pdftk
  • atril
  • GIMP
  • Inkscape
  • LibreOffice Draw

 

Additionally, can't view in online PDF viewers, such as:

http://www.reader-plus.com/app/

"Experience is what enables you to recognise a mistake the second time you make it."

"Good judgement comes from experience.  Experience comes from bad judgement."

"Wisdom is always wont to arrive late, and to be a little approximate on first possession."

"When you hear hoofbeats, think horses, not unicorns."

"Fast.  Cheap.  Good.  Pick two."

"We see a lot of arses on handlebars around here." - [J Ekdahl]

 

  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

Ntano wrote:

Ok. Attach it is.

 

Thanks. I've added 23 to the Tutorials post but, like Joey, I can;t open #15.

 

So close. Just one more to go.

#1 This forum helps those that help themselves

#2 All grounds are not created equal

#3 How have you proved that your chip is running at xxMHz?

#4 "If you think you need floating point to solve the problem then you don't understand the problem. If you really do need floating point then you have a problem you do not understand." - Heater's ex-boss

  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

Unfortunately DN_015 is corrupted indeed (missing a bunch of stuff in the end of file)

I checked all others and funny enough only DN_015 is corrupted...

Pity...

  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

We were able to dump the server, and I put the content here: https://community.atmel.com/wiki...

 

 Seems that we are also missing #015 :)

:: Morten

 

(yes, I work for Atmel, yes, I do this in my spare time, now stop sending PMs)

  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

See this for updates:

 

https://www.avrfreaks.net/forum/...

 

JIm

I would rather attempt something great and fail, than attempt nothing and succeed - Fortune Cookie

 

"The critical shortage here is not stuff, but time." - Johan Ekdahl

 

"Step N is required before you can do step N+1!" - ka7ehk

 

"If you want a career with a known path - become an undertaker. Dead people don't sue!" - Kartman

"Why is there a "Highway to Hell" and only a "Stairway to Heaven"? A prediction of the expected traffic load?"  - Lee "theusch"

 

Speak sweetly. It makes your words easier to digest when at a later date you have to eat them ;-)  - Source Unknown

Please Read: Code-of-Conduct

Atmel Studio6.2/AS7, DipTrace, Quartus, MPLAB, RSLogix user

Topic locked