AVRISP mkII clone don't working in AtmelStudio7.0.1931 on Win7(x64)

Log in or register to post comments
Go To Last Post
5 posts / 0 new
Author
Message
Darien
Darien's picture
Level: Wannabe
Joined: Sat. Dec 22, 2018
Posts: 84 View posts
#1
Posted by Darien: Sat. Dec 22, 2018 - 10:08 PM
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

I have AVRISP mkII clone. It was working on AtmelStudio 6.2. I start to use AtmelStudio7.0.1931 and studio see AVRISP mkII clone and it available to use for AVR Device Programming.

I start with Tools -> Device Programming -> select AVRISP mkII -> select my chip: Atmega16, interface: ISP -> press Apply -> Firmware Update: AVRISP mkII firmware must be updated befor continuing(On Tool: 1.17, On Disk: 1.18) -> press Update -> Error: AVRISP mkII firmware update faild, toogle power on tool and retry upgrade...    so now I don't know next step to resolve problem)

I update AVRISP mkII clone firmware with FLIP and write to it latest hex file I have. May be there is some new firmware AVRISP mkII clone hex file  for Atmel Studio 7.0. I don't know about that. If there is share links please)

I guess problem with USB drivers in studio. Any tips? Have someone similar problems? If someone resole similar proble please share some links to files (if there is some) and steps to resolve))

This topic has a solution.

Tags:

Tools, In-System Debuggers and Programmers, solved, AVRISP mkII clone
Last Edited: Sun. Dec 23, 2018 - 01:51 AM
Top
Darien
Darien's picture
Level: Wannabe
Joined: Sat. Dec 22, 2018
Posts: 84 View posts
Posted by Darien: Sun. Dec 23, 2018 - 12:11 AM
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

I find https://www.avrfreaks.net/forum/...

In \Atmel\Studio\7.0\tools\AVRISPmkII  directory available file (*.enc). This type of file can't be used in FLIP (only *.hex files good to go). So possible solution for finding proper firmware hex file for AVRISP mkII clone still on table.

Top
Darien
Darien's picture
Level: Wannabe
Joined: Sat. Dec 22, 2018
Posts: 84 View posts
This reply has been marked as the solution. 
Posted by Darien: Sun. Dec 23, 2018 - 01:51 AM
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

Ok, I find some solution.

Problem was with using not good for AtmelStudio7.0 hex file for AVRISP mkII clone firmware. Solution is to find proper firmware file for your device and write device for example with FLIP (as I do) and try it.

I do not understand why AtmelStudio can't update firmware, but I guess because I use not original device.

I find not so good firmware for my clone (LED no active) but my AVRISP mkII clone start to work))) so in future I will consider to buy original AVRISP mkII or similar device for programming chips on AtmelStudio7.0 version.

 

I use files: 

AVRISP-MKII_lufa151115_16MHz_Danko.hex

AVRISP-MKII_lufa151115_8MHz_Danko.hex

From forum: 

radiokot

Last Edited: Sun. Dec 23, 2018 - 01:55 AM
Top
Bronze Markjs
js's picture
Level: Moderator
Joined: Wed. Mar 28, 2001
Posts: 29714 View posts
Location: Sydney, Australia (Gum trees, Koalas and Kangaroos, No Edelweis, but plenty of Corona beer)
Posted by js: Sun. Dec 23, 2018 - 03:38 AM
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

I will consider to buy original AVRISP mkII or similar device for programming chips on AtmelStudio7.0 version.

AVRISP mkII are obsolete and they haven't been available for many years, the current tool is the Atmel ICE.

John Samperi

Ampertronics Pty. Ltd.

www.ampertronics.com.au

* Electronic Design * Custom Products * Contract Assembly

Top
Darien
Darien's picture
Level: Wannabe
Joined: Sat. Dec 22, 2018
Posts: 84 View posts
Posted by Darien: Sun. Dec 23, 2018 - 01:30 PM (Reply to #4)
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

Thanks will buy this device. I hope no need to look into hex files for firmware update after new AtmelStudio is releced) I look some device to plug in set drivers and good to go.

Top