I have designed a Atmel chip offline autoprogramer, now can support almost all Atmel 8bit/32bit MCUs(ATMEGA,ATTINY,ATSAM-D,STSAM-G).
I call it P-LINK.
What's Offline Autoprogrammer(P-LINK):
Normally, when programing a Atmel's Chip, programer need a desktop PC and a ATMEL-ICE or STK-500 or a J-LINK, then click your mouse once program one chip, it's too slow and inefficient. and programmers always fells uncomfortable when scaring at the PC Screen for a long time.
P-LINK is designed to solve this issure.
How to USE P-LINK:
Step1: Plug your P-LINK to one of your Desktop's USB Port
Connect your P-LINK to PC, you will find a Mass Storage Device in MY-COMPUTER, Open It,you will find ARM_BURNTOOL.exe,double click it to open it.
Step2:Config the burn tool including chip part no, fuses, user firware and then download to P-LINK. After that plug your P-Link out of PC.
Step3: Power On your P-LINK with a 5V Power Aadpter,then Connect your Atmel chip to ISP、SWD， UPDI interface then press Start Button,
P-Link will autoprogram your code,fuses and lockbit to your chip.
Easy and usefull!