I am trying to implement QTouch library with ATMEGA328PB. Code is compiling well but I am not able to upload code to MCU. Below is the response I am getting from avrdude.
avrdude: auto set sck period failed avrdude: error: program enable: target doesn't answer. 1 avrdude: initialization failed, rc=-1 avrdude: AVR device initialized and ready to accept instructions avrdude: Device signature = 0x886b2e avrdude: Expected signature for ATmega328 is 1E 95 14 avrdude done. Thank you.
I am using this USBASP Programmer:https://www.amazon.in/Embeddinator-ENG-PROGV1-1-Embeddinators-USB-ASP-Programmer/dp/B01MT0IFT6?tag=googinhydr18418-21&tag=googinkenshoo-21&ascsubtag=bfa0083c-c853-4d04-93b8-603aba2b0b7f
And I am using this ATMEGA328PB board:https://exploreembedded.com/wiki/Tit,_a_supercharged_Arduino_Pro_Mini_with_Atmega328pb
The programmer I am using don't have Reset pin so is this the problem because of which I am not able to program?
I am checked the connections and are correct.
Please guide me.