Atmel Studio 7 extended chip id

Go To Last Post
3 posts / 0 new
Author
Message
#1
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

Forgive me a SMART ARM question but Microchip/Atmel support is down for training until the 19th.

 

I have been developing with Atmel Studio 6.2 sp2 21563 and using the ICE debugger with FM 1.26. I am trying to modify the bootloader from app note AT16743 which comes with Studio 7 software. I figured this would be a good time to take the plunge into Studio 7, but when I try to program the ATSAMV71Q21 hardware (which works fine with Studio6) it tells me "Unexpected Extended Chip Identifier 0x00000001 (expected 0x00000002)." With Studio6, I select device ATSAMV71Q21. With Studio7 if I deliberately put in wrong device it tells me the device read is an ATSAMV71Q21B, but still gives me the extended chip id error which prevents me from debugging.

 

Any thoughts on why Studio6 can program this hardware and Studio7 can not? I tried uninstalling both Studio6 and 7 and reinstalling and now the Atmel.com/tools/studioarchive.aspx says "the service is unavailable" so I can't get back to Studio6.

 

Last Edited: Wed. Aug 16, 2017 - 08:23 PM
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

jtrantow wrote:
Forgive me a SMART ARM question

There is an ARM-specific Studio forum: https://community.atmel.com/forums/atmel-studio-arm-related

Top Tips:

  1. How to properly post source code - see: https://www.avrfreaks.net/comment... - also how to properly include images/pictures
  2. "Garbage" characters on a serial terminal are (almost?) invariably due to wrong baud rate - see: https://learn.sparkfun.com/tutorials/serial-communication
  3. Wrong baud rate is usually due to not running at the speed you thought; check by blinking a LED to see if you get the speed you expected
  4. Difference between a crystal, and a crystal oscillatorhttps://www.avrfreaks.net/comment...
  5. When your question is resolved, mark the solution: https://www.avrfreaks.net/comment...
  6. Beginner's "Getting Started" tips: https://www.avrfreaks.net/comment...
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

:: Morten

 

(yes, I work for Atmel, yes, I do this in my spare time, now stop sending PMs)

Topic locked