Reading Arduino Leonardo with USBASP ?

Go To Last Post
2 posts / 0 new
Author
Message
#1
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

Guys,

 

How can I read Arduino Leonardo with USBASP ?

I tried with Avrdude and got :

avrdude: warning: cannot set sck period. please check for usbasp firmware update.
avrdude: error: programm enable: target doesn't answer. 1
avrdude: initialization failed, rc=-1
avrdude: AVR device initialized and ready to accept instructions
avrdude: Device signature = 0x000000
avrdude: Yikes!  Invalid device signature.
avrdude: Expected signature for ATmega32U4 is 1E 95 87

avrdude done.  Thank you.

Any clues ?

Thanks

  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0

I fixed it, put wrong cable to MISO and MOSI....thanks for reading...