Happy new year 2014 to everyone!
I would like to connect the XMEGA-A1 Xplained Kit ("A09-0560/07", green PCB) to a dragon board via a 10pin ribbon cable. http://www.atmel.com/Images/doc8... (Atmel Application Note AVR1924 XMEGA-A1 Xplained Hardware User's Guide).
There is a breakout in the PCB, probably for a 'nose' of an appropriate connector (assumingly, that it may not plugged-in up-side-down).
It seems that my connectors are too thick ( http://www.reichelt.de/Pfosten-W... ) or that the 90Â° pinheader of the kit is mounted too close to the PCB.
Has also somebody else noticed this fact?
Or do you have better connectors types / cables?
PS: The fugure 4.1 in http://www.atmel.com/images/doc8... shows a matching cable/connector (blue PCB).