Recent Discussions

Posted by robinson1998 on Tuesday, 1 December 2020 - 15:17

Commented by avrcandies on Wednesday, 2 December 2020 - 06:42

you are comparing ocr1ah twice in the decision...ocr could change between the decisions, causing some...
Posted by pajuhesh80 on Wednesday, 2 December 2020 - 06:42
As you know, XC8 also supports AVR devices. I wonder how is its PRO version compared to gcc? I didn't have good...
Posted by steve17 on Sunday, 29 November 2020 - 01:11

Commented by skeeve on Wednesday, 2 December 2020 - 05:29

I infer from the data members of Port_device, that Xmega pin port registers are grouped by port. IIRC that...
Posted by johnsondavies on Monday, 16 November 2020 - 10:13

Commented by DocJC on Wednesday, 2 December 2020 - 04:40

Now that that is sorted out, it would be interesting to hear your plans for the analog front end to drive the counter.  ...
Posted by paul_n on Wednesday, 2 December 2020 - 02:11

Commented by paul_n on Wednesday, 2 December 2020 - 04:14

Thank you Jim!
Posted by atonys on Wednesday, 2 December 2020 - 01:15

Commented by ka7ehk on Wednesday, 2 December 2020 - 02:20

Simply tryi some values down to 500 KHz or so.     Jim

BUZZING TOPICS (LAST 6 MONTHS)

Posted by js on Friday, 23 September 2016 - 02:35

Commented by gchapman on Thursday, 19 November 2020 - 00:16

AN3641 - Low-Power, Cost-...
Posted by Brian Fairchild on Saturday, 12 August 2017 - 13:49

Commented by gchapman on Wednesday, 25 November 2020 - 16:16

Posted by gchapman on Sunday, 31 December 2017 - 05:15

Commented by gchapman on Wednesday, 4 November 2020 - 00:15

Assembly of mega808 and mega1608 in QFN will be moving to Microchip Thailand.
Posted by strontiumdog on Sunday, 11 August 2019 - 01:39

Commented by gchapman on Saturday, 21 November 2020 - 19:59

AVR128DA :
Posted by El Tangas on Saturday, 17 February 2018 - 17:46

Commented by vignesh724452 on Saturday, 28 November 2020 - 15:07

Hey, can we set lock bits ?? if i'm not wrong it's just another fuse bit.
Posted by jaycarlson on Friday, 21 July 2017 - 19:39

Commented by gchapman on Tuesday, 13 October 2020 - 22:55

Printf...